Page is loading ...
16 Bottle Stainless Steel
Silent Cellar
INSTRUCTION MANUAL
To ensure proper use of this appliance and your safety, please read the following
instruction completely before operating this appliance.
WineEnthusiast.com
800.356.8466
1
Operation Manual
Index
I. General Safety Precautions…………....................... 2
II. Technical Data……………………….......................... 3
III. Illustrated Structure……………………..................... 4
IV. Electric Principle Diagram…………………………… 4
V. Operation ………………………………………….. …. 5
VI. Particular Precautions………………………………... 6
VII. Maintenance………………………………………….. 6
VIII. Troubleshooting……………………………………….. 7
2
I. GENERAL SAFETY PRECAUTIONS
● After removing the refrigerator from the package, make
sure it is in good condition. In case of doubt, do not use
it and contact an authorized service center.
● Read the operation manual carefully and check that the
rating data on the rating nameplate corresponds to your
power supply.
● This refrigerator can only be used in the manner of
which it was designed. The manufacturer will not be
liable for any damage due to improper use or repairs
made by unqualified personnel.
● Before cleaning the refrigerator, make sure it is
unplugged. Never clean the unit with acid, gasoline, oil
or any other kind of chemical substance that could
damage the refrigerator.
● Repair should only be made by authorized service
centers.
● Caution
1. To reduce the risk of fire, replace only with same type
fuse.
2. Free standing installation only
3. Do not use extension cords.
4. Danger: Risk of child entrapment. Before throwing
away your old refrigerator, you must:
a) Remove all doors;
b) Leave the shelves in place, so that children may
3
not easily climb inside.
II.TECHNICAL DATA
Type
Volume (liter) 48L
Case Iron
Material
Door Glass
Unit Dimension
(W×H×D)(inches)
17x20x19
Packaging Dimension
(W×H×D)(inches)
19x21x21.25
Net Weight (lbs) 30
Gross Weight (lbs) 34
Power Consumption
(KW·h/24h)
1.0
Max ambient temperature
range of working
＜86° F
Temperature Range
52° - 65° F
Rated Voltage AC110V
Rated Frequency 60HZ
Current 0.95A
Input power 70W
III.ILLUSTRATED STRUCTURE
1. Electronic Display 2. LED Light
3. Stainless Steel Handle 4. Shelf (3)
5. Leveling Foot 6. Hinge Cover
7. Fan Cover 8. Stainless Steel Door
IV.ELECTRIC PRINCIPLE DIAGRAM
4
V.OPERATION OF REFRIGERATOR
a) Your wine cooler has an electric temperature control
on the front of the unit. You may program the
temperature of your wine cooler at any setting you
desire. The temperature range varies from 52 to 65
degrees. When initially turned on, the LED will
display the ambient temperature and then the internal
cabinet temperature. The zone temperature may
have a difference of 5°F (3°C) from setting depending
on loading and ambient conditions.
b) Pressing the button on the display will increase
the temperature and the button will lower the
temperature.
c) Once you have set the desired temperature, the
display will flash for 5 seconds and then revert to the
internal cabinet temperature.
d) You can turn the interior light ON or OFF by pressing
the button.
e) When you press both and buttons for at least
(3) three seconds, you get the temperature readout
either in Fahrenheit or Celsius.
5
6
VI. PARTICULAR PRECAUTIONS
● To assure your wine cooler works at the maximum
efficiency it was designed for, you should install it in a
location where there is proper air circulation, plumbing
and electrical connections.
● The following are recommended clearances around the
wine cooler:
sides 3/4＂ 19mm
top 4＂ 100mm
back 2＂ 50mm
● For proper internal air circulation, do not overfill your
wine cooler.
● Avoid direct sunlight.
● Do not place heavy articles on the top of the cellar.
VII. MAINTENANCE
● Shut off power supply before cleaning cabinet.
● Take out wines and shelves, and then clean the cabinet
with soda water first and with clean water.
● Do not use soap or detergent for the cabinet.
● Clean the cellar regularly.
7
VIII. TROUBLESHOOTING
Symptoms Possible cause Solutions
No cooling
z Plug not put in
z Low voltage
z Fuse broken
z Put in the plug
z Ensure normal voltage
z Change fuse
Not cold enough
temperature inside
z The refrigerator
is placed too
near heat
source;
z Bad ventilation;
z Fans not working
z The door is not
closed tightly or
opened too
frequently or for
too long time;
z Keep the refrigerator away from
sunshine or other heat source;
z Place the refrigerator in the area
with good ventilation and keep
things away from the fans;
z Check whether the plug is
connected or change the fan;
z Close the door tightly and don’t
open the door too frequently or for
too long time.
Inside light flashing
z Set temperature
higher than inner
temperature;
z The automatic
defrost function
start to work
z Adjust the adjustor
z Normal function. No repair needed
Frost on the cold
sink。
Too much humidity
or too low
temperature inside
the case
Output the plug, stop the power, and defrost
by hand,
Connect power again when
the ice thaws
/
