2. Home
  3. Domestic appliances
  4. Climate control
  5. Stoves
  6. SCAN
  7. 68-1
68-1

SCAN 68-1 Assembly And Instruction Manual

  • Hello! I am an AI chatbot trained to assist you with the SCAN 68-1 Assembly And Instruction Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
68
ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 68
UK
SCAN
UK - ASSEMBLY AND INSTRUCTIONS MANUAL
SCAN
68
2
68
UK
SCAN
You have purchased a product by one of Europe’s leading manufacturers of
wood-burning stoves, and we are sure that you will have years of pleasure from your
purchase.
To make the best possible use of your stove, it is important that you
follow our advice and instructions.
Read through this Assembly and Instruction
Manual carefully before you start to assemble your stove.
CONGRATULATIONS
ON YOUR NEW SCAN
WOOD-BURNING STOVE
PLEASE NOTE!
YOU GET THE BEST USE OF
THE STOVE BY USING
A TOP-DOWN
LIGHTING METHOD
SEE
"INSTRUCTIONS FOR HEATING"
Scan 68-1
Wall hung model
Without side windows
Black mouldings
Scan 68-2
Wall hung model
Without side windows
Aluminium mouldings
Scan 68-3
Pedestal
Without side windows
Black mouldings
Scan 68-4
Pedestal
Without side windows
Aluminium mouldings
Scan 68-5
Portal
Without side windows
Black mouldings
Scan 68-6
Portal
Without side windows
Aluminium mouldings
Scan 68-7
Wall hung model
With side windows
Black mouldings
Scan 68-8
Wall hung model
With side windows
Aluminium mouldings
Scan 68-9
Pedestal
With side windows
Black mouldings
Scan 68-10
Pedestal
With side windows
Aluminium mouldings
Scan 68-11
Portal
With side windows
Black mouldings
Scan 68-12
Portal
With side windows
Aluminium mouldings
Scan 68-13 LB
Low Base
Without side windows
Black mouldings
Scan 68-14 LB
Low Base
Without side windows
Aluminium mouldings
Scan 68-13
Steel sides
Without side windows
Black mouldings
Scan 68-14
Steel sides
Without side windows
Aluminium mouldings
Scan 68-13 HT
High Top
Without side windows
Black mouldings
Scan 68-14 HT
High Top
Without side windows
Aluminium mouldings
Scan 68-15 LB
Low Base
Without side windows
Black mouldings
Scan 68-16 LB
Low Base
Without side windows
Aluminium mouldings
Scan 68-15
Soapstone
Without side windows
Black mouldings
Scan 68-16
Soapstone
Without side windows
Aluminium mouldings
Scan 68-15 HT
High Top
Soapstone
Without side windows
Black mouldings
Scan 68-16 HT
High Top
Soapstone
Without side windows
Aluminium mouldings
SCAN 68-SERIEN
4
TABLE OF CONTENTS
 ¬
MOUNTING THE UK-SCREW 43
 ¬
TECHNICAL DATA 5
Installation 5
Safety 5
Technical data and dimensions 5
Dimension 6
Type plate 12
Product registration number 13
 ¬
ASSEMBLY 13
Additional accessories 13
Loose parts 13
Disposal of packaging 13
Removal of packaging 14
Mounting of the burn chamber on the pedestal basel 15
Mounting of the burn chamber on the portal basel 16
Mounting of the storage door for the portal unit 17
Mounting of wall-hung model 18
Mounting of the wall fitting on the stove 19
Removal of the self-closing door spring 22
Mounting of external air supply on the wall fitting 22
Fitting natural stone 23
Mounting of high top 24
Wall mounting kit for Scan 68 with high top 25
Heat-storage stone 26
Height adjustment of stove 27
Connecting piece 27
Existing chimney and pre-fabricated element chimney 28
Connection between stove and steel chimney 28
Requirements for chimney 28
Load-bearing foundation 29
Floor plate 29
Positioning your wood-burning stove 29
Distance to furniture 29
Safety distance 29
Distance to flammable materials, 30
Distance to firewall 31
 ¬
INSTRUCTIONS FOR USE 32
CB-technology (Clean Burn) 32
Baffle plate 32
Primary air 32
Secondary air 32
Ash container 32
The Clean Air Act 1993 and Smoke Control Areas 32
Handle for riddling grate 33
Refueling on to a low fire bed 33
Operation with door left open 33
Dampers left open 33
Fresh air intake 34
Closed combustion system 34
 ¬
INSTRUCTIONS FOR HEATING 35
Environmentally friendly operation 35
Lighting 35
Continuous operation 36
Warning about over-firing 36
Using your stove in various weather conditions 36
Firing in the spring or autumn 36
The function of the chimney 36
General notes 36
Chimney fire 37
 ¬
HANDLING FUEL 37
Selecting wood/fuel 37
Preparation 37
Storing 37
Moisture 37
Use of the following as fuel is illegal 37
Calorific value of the wood 37
 ¬
MAINTAINANCE 38
 ¬
TROUBLESHOOTING 41
 ¬
WARRANTY 42
5
TECHNICAL DATA AND DIMENSIONS
Materials
Steel plate
Cast iron
Galvanised sheet
Vermicolite
Surface treatment Senotherm
Max. wood length ca. 33 cm
Weight Scan 68-1/2/7/8 ca. 98 kg
Weight Scan 68-3/4/9/10 ca. 105 kg
Weight Scan 68-5/6/11/12 ca. 107 kg
Weight Scan 68-13/14 ca. 110 kg
Weight Scan 68-13/14 LB ca. 100 kg
Weight Scan 68-15/16 ca. 190 kg
Weight Scan 68-15/16 LB ca. 170 kg
Connecting piece internal diameter 144 mm
Connecting piece external diameter 148 mm
Approval type Intermittent fuelling*
Intermittent operation in this context means normal use
of a wood-burning stove. In other words, you should let
the fire die down until only the embers are left before
refueling.
This stove is produced in accordance with type approval
for the product, which also covers the product’s Assembly
and Instruction Manual.
The Declaration of Performance (DoP) is available from
www.scan.dk
*
TECHNICAL DATA
INSTALLATION
¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local
building regulations as well as the information provided in this Assembly and Instruction Manual.
¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition
you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning.
¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your Scan
Dealer will be able to recommend a qualified fitter in your area. For information on Scan Dealers, please go to www.scan.dk.
SAFETY
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as
intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case
if parts that are necessary for the operation and safety of the stove are dismantled or removed.
Test in compliance with EN 13240
CO Emission at 13% O
2
0,04 %
CO
Emission at 13% O
2
556 mg/Nm
3
Dust @ 13% O
2
14 mg/Nm
3
No
x
@ 13% O
2
85 mg/Nm
3
Efficiency 80 %
Energy efficiency index 107
Energy efficiency class A+
Nominel output 5,5 kW
Chimney temperature EN 13240 265 °C
Amount of smoke 5,3 g/sek
Sub-pressure EN 13240 12 Pa
Recommended sub-pressure in
connecting piece
17 Pa
Required combustion air supply 16,2 m
3
/h
Fuel Wood
Fuel consumption 1,6 kg/h
Amount of fuel 1,4 kg
Test in compliance with EN 13240
in smoke restricted areas
CO Emission at 13% O
2
0,06 %
CO
Emission at 13% O
2
785 mg/Nm
3
Dust @ 13% O
2
12 mg/Nm
3
No
x
@ 13% O
2
91 mg/Nm
3
Efficiency 79 %
Energy efficiency index 105,6
Energy efficiency class A
Nominel output 5 kW
Chimney temperature EN 13240 248 °C
6
192
179
371
221
179
400
6110
326
1255
350
130 220
794
500
400
371
776
681
250
B A
C
B A
C
1272
500
250
C
DIMENSION SKETCH SCAN 68-3, 68-4, 68-9 AND 68-10 (PEDESTAL)
DIMENSION
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
SCAN 68-1, 68-2, 68-7 AND 68-8 (WALL HUNG MODEL)
7
371
192
179
1110
1205
350
175
1222
500
250
B A
C
C
DIMENSION SKETCH SCAN 68-5, 68-6, 68-11 AND 68-12 (PORTAL)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
8
371
192
179
3
7
1
1
7
9
1
9
2
1110
1205
219
147
276
1222
500
250
B
500
250
1
0
0
0
C
A
C
C
C
8
8
9
9
8
3
147
219
8
8
B A
C
DIMENSION SKETCH 68-13 AND 68-14 (STEEL SIDES)
DIMENSION SKETCH SCAN 68-13 AND 68-14LB (LOW BASE)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
9
276
1110
1205
147
366
1650
250
B A
C
C
371
179
192
DIMENSION SKETCH SCAN 68-13 AND 68-14 HT (HIGH TOP)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
10
1
2
5
7
586
219
147
8
8
889
983
3
7
1
1
9
2
1
7
9
3
7
1
1
7
9
1
9
2
1
2
0
5
1
1
1
0
2
7
6
147
219
B A
C
C
1
0
3
5
586
294
B A
C
C
DIMENSION SKETCH SCAN 68-15 AND 68-16 (SOAPSTONE)
DIMENSION SKETCH SCAN 68-15 AND 68-16 LB (SOAPSTONE + LOW BASE)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
11
1
6
8
5
586
3
7
1
1
9
2
1
7
9
1
2
0
5
1
1
1
0
2
7
6
147
219
B A
C
C
C
DIMENSION SKETCH SCAN 68-15 AND 68-16 HT (SOAPSTONE + HIGH TOP)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
12
)97DÝßÞ7D:Ýßß
Wall mounted room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØá
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 500 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
)97DÝßÚÛÜÝáÚáÛáÜáÝ
Freestanding room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØÙ
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 400 mm - Back: 150 mm - Front: 1100 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
)97DÝßá7D:ÝßÙ
Wall mounted room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØØ
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 400 mm - Front: 1100 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
)97DÝßàáØáááÙ
Freestanding room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØÚ
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 500 mm - Back: 150 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
Typeplates
)97DÝßÞ+!7D:Ýßß+!
Wall mounted room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØÜ
Wood
Intermittent
UK
Classification
Intermittent
Certificate/Standard
EN 13240
300-ELAB-2100-EN-U
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 12 mg/Nm³
Flue gas temperature: 248°C
Nominal heat output: 5 kW
Efficiency: 79%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 500 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
1000 10-2014
0,06% 785 mg/Nm³
)97DÝßÚÛÜÝáÚáÛáÜáÝ+!
Freestanding room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØÝ
Wood
Intermittent
UK
Classification
Intermittent
Certificate/Standard
EN 13240
300-ELAB-2100-EN-U
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 12 mg/Nm³
Flue gas temperature: 248°C
Nominal heat output: 5 kW
Efficiency: 79%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 400 mm - Back: 150 mm - Front: 1100 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
1000 10-2014
0,06% 785 mg/Nm³
)97DÝßá+!7D:ÝßÙ+!
Wall mounted room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØÛ
Wood
Intermittent
UK
Classification
Intermittent
Certificate/Standard
EN 13240
300-ELAB-2100-EN-U
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 12 mg/Nm³
Flue gas temperature: 248°C
Nominal heat output: 5 kW
Efficiency: 79%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 400 mm - Front: 1100 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
1000 10-2014
0,06% 785 mg/Nm³
)97DÝßàáØáááÙ+!
Freestanding room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØÞ
Wood
Intermittent
UK
Classification
Intermittent
Certificate/Standard
EN 13240
300-ELAB-2100-EN-U
Approved by
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 12 mg/Nm³
Flue gas temperature: 248°C
Nominal heat output: 5 kW
Efficiency: 79%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 500 mm - Back: 150 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
1000 10-2014
0,06% 785 mg/Nm³
TYPE PLATE
All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flammable
materials.
The type plate is located at the rear of the stove.
13
6800000
PRODUCT REGISTRATION NUMBER
All Scan wood-burning stoves are provided with a product registration number. You will always need to quote this number when
contacting your dealer or Scan A/S.
The product registration number is located at the rear of the stove.
ADDITIONAL ACCESSORIES
¬ Small shaped floor plate in glass or steel ¬ High Top (Scan 68-13/14)
¬ Large shaped floor plate in glass or steel ¬ High Top (Scan 68-15/16)
¬ Storage door for the portal unit ¬ Heat accumulating stones for high top
¬ Connecting piece for inside flue pipe, 6" ¬ Wall mounting kit for Scan 68 with high top
¬ Adjustment key for height adjustment
LOOSE PARTS
¬ Glove ¬ Dekor ring for top outlet
¬ Connecting piece 6" ¬ 4 Screw M5 x 10 mm
¬ Seal ¬ 1 Pass Screw M5 x 10 mm (UK) - Please see instructions
DISPOSAL OF PACKAGING
Your Scan stove may come supplied with the following packaging:
Wood packaging
The wood packaging can be reused and after final use can be incinerated as a
CO
2
neutral
product or sent for recycling.
Polystyrene top Send for recycling or waste disposal
Foam Send for recycling or waste disposal
Plastic bags Send for recycling or waste disposal
Stretch/plastic film Send for recycling or waste disposal
ASSEMBLY
Type plate
Product registration number
Product registration number
14
41
2
3
5
REMOVAL OF PACKAGING
Check that the stove is not damaged before starting to install it.
Pull back and lift
Please remove protection
The plastic plugs are mounted in the transport
safety holes
Remove the two screws in the wood compartment
and lift the stove off the pallet
15
1 2
The stove is delivered with the screws mounted.
These must be removed before mounting the base
MOUNTING OF THE BURN CHAMBER ON THE PEDESTAL BASEL
When the stove has been placed on the base,
the four screws must be remounted
16
1 2
The stove is delivered with the screws mounted.
These must be removed before mounting the base
MOUNTING OF THE BURN CHAMBER ON THE PORTAL BASEL
When the stove has been placed on the base,
the four screws must be remounted
17
T
3
1 2
5
6 7
4
MOUNTING OF THE STORAGE DOOR FOR THE PORTAL UNIT
Remove the four screws under
the stove before placing the
door assembly
RejustThe 4 outer screws at the bottom are easily tightened
Carefully push the door
assembly in from behind
Remount the doorFirst mount the four
screws at the top
Dismount the door
(ACCESSORY)
18
)97DÝßÞ7D:Ýßß
Wall mounted room heater fired by solid fuel
)J7D:7H:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
$áÚÙÛØ E&àØØÝßÝØá
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 500 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
Is only to be removed for external air supply
Replace with the inclosed
Type plate
Must be removed, also in the
heat shield, for wall fitting
Must be removed for wall fitting
MOUNTING OF WALL-HUNG MODEL
Installation must be planned and executed in accordance with national and local building regulations.
The stove must only be fitted to a non-flammable wall. There must be no form of flammable component in the wall. In the case of
thin walls, nor must there be any behind the wall. The load-bearing capacity of the wall must be checked under all circumstances.
To ensure correct installation we recommend that a building expert be commissioned to plan and outline the installation with a
view to subsequent approval.
For wall installation we recommend using the wall brackets supplied.
If a chimney is installed on top of a wall-hung model, the chimney must be fully self-supporting. It must not rest on the
wood-burning stove. There must be a distance of at least 6 mm between the first section and the flange on the flue collar. Please
consult a specialist.
Scan A/S disclaims all liability for the installation of wall-hung wood-burning stoves.
Use either a drilling machine with Ø 6 mm drill or cutting
nippers to remove the illustrated plates
19
3
41
2
5
6
In order to mount the wall fitting to a chimney made
of Leca-blocks you need 6 pcs. FBS 8x70/5 US Leca
screws.
The test report can be required at Scan A/S
When the two screws have been removed, you can lift
the guide plate and put the fitting underneath
MOUNTING OF THE WALL FITTING ON THE STOVE
Fasten the fitting with two screws.
Remount the guide plate with the two screws
Remove the top plate
Remove the two screws as shown below
Mount the top plate and the decor grid
20
Min. 268 mm
511 mm
169 mm
xx
7 8
10
9
Min. 317 mm
Min. 510 mm
Min. 647 mm
Min. 845 mm
677,5 mm
Draw a vertical line on the wall
(you can use a spirit level).
Use this line for the mounting of the wall fitting
Measure from the vertical line and drill the holes
Use the guide blocks to hold the wall fitting while
adjusting it.
Use the line or a spirit level.
Drill the necessary holes and mount the screws
(Continued on next page)
Mount the two guide blocks
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/