Tektronix 222PS User manual

  • Hello! I am an AI chatbot trained to assist you with the Tektronix 222PS User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
222PS
PowerScout
Power Systems Oscilloscope
Operator Manual
070-8097-02
Please check for change information at the rear
of this manual.
Second Edition: December 1993
Last Revised: September 29, 1994
222PS
PowerScout
Power Systems Oscilloscope
Operator Manual
070-8097-02
Please check for change information at the rear
of this manual.
Second Edition: December 1993
Last Revised: September 29, 1994
Instrument Serial Numbers
Each instrument manufactured by Tektronix has a serial number on a panel
insert or tag, or stamped on the chassis. The first letter in the serial number
designates the country of manufacture. The last five digits of the serial number
are assigned sequentially and are unique to each instrument. Those
manufactured in the United States have six unique digits. The country of
manufacture is identified as follows:
B010000 Tektronix, Inc., Beaverton, Oregon, USA
E200000 Tektronix United Kingdom, Ltd., London
J300000 Sony/Tektronix, Japan
H700000 Tektronix Holland, NV, Heerenveen, The Netherlands
Instruments manufactured for Tektronix by external vendors outside the United
States are assigned a two digit alpha code to identify the country of manufacture
(e.g., JP for Japan, HK for Hong Kong, IL for Israel, etc.).
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
Printed in U.S.A.
Copyright
E Tektronix, Inc., 1991, 1993. All rights reserved. Tektronix products
are covered by U.S. and foreign patents, issued and pending. The following are
registered trademarks: TEKTRONIX, TEK, TEKPROBE, and SCOPEĆMOBILE.
Instrument Serial Numbers
Each instrument manufactured by Tektronix has a serial number on a panel
insert or tag, or stamped on the chassis. The first letter in the serial number
designates the country of manufacture. The last five digits of the serial number
are assigned sequentially and are unique to each instrument. Those
manufactured in the United States have six unique digits. The country of
manufacture is identified as follows:
B010000 Tektronix, Inc., Beaverton, Oregon, USA
E200000 Tektronix United Kingdom, Ltd., London
J300000 Sony/Tektronix, Japan
H700000 Tektronix Holland, NV, Heerenveen, The Netherlands
Instruments manufactured for Tektronix by external vendors outside the United
States are assigned a two digit alpha code to identify the country of manufacture
(e.g., JP for Japan, HK for Hong Kong, IL for Israel, etc.).
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
Printed in U.S.A.
Copyright
E Tektronix, Inc., 1991, 1993. All rights reserved. Tektronix products
are covered by U.S. and foreign patents, issued and pending. The following are
registered trademarks: TEKTRONIX, TEK, TEKPROBE, and SCOPEĆMOBILE.
WARRANTY
Tektronix warrants that this product will be free from defects in materials
and workmanship for a period of three (3) years from the date of
shipment. If any such product proves defective during this warranty
period, Tektronix, at its option, either will repair the defective product
without charge for parts and labor, or will provide a replacement in
exchange for the defective product.
In order to obtain service under this warranty, Customer must notify
Tektronix of the defect before the expiration of the warranty period and
make suitable arrangements for the performance of service. Customer
shall be responsible for packaging and shipping the defective product to
the service center designated by Tektronix, with shipping charges prepaid.
Tektronix shall pay for the return of the product to Customer if the
shipment is to a location within the country in which the Tektronix service
center is located. Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products returned to any
other locations.
This warranty shall not apply to any defect, failure or damage caused by
improper use or improper or inadequate maintenance and care. Tektronix
shall not be obligated to furnish service under this warranty a) to repair
damage resulting from attempts by personnel other than Tektronix
representatives to install, repair or service the product; b) to repair
damage resulting from improper use or connection to incompatible
equipment; or c) to service a product that has been modified or integrated
with other products when the effect of such modification or integration
increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THIS
PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR
IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TEKTRONIX' RESPONSIBILITY TO REPAIR
OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH
OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER
TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE
POSSIBILITY OF SUCH DAMAGES.
WARRANTY
Tektronix warrants that this product will be free from defects in materials
and workmanship for a period of three (3) years from the date of
shipment. If any such product proves defective during this warranty
period, Tektronix, at its option, either will repair the defective product
without charge for parts and labor, or will provide a replacement in
exchange for the defective product.
In order to obtain service under this warranty, Customer must notify
Tektronix of the defect before the expiration of the warranty period and
make suitable arrangements for the performance of service. Customer
shall be responsible for packaging and shipping the defective product to
the service center designated by Tektronix, with shipping charges prepaid.
Tektronix shall pay for the return of the product to Customer if the
shipment is to a location within the country in which the Tektronix service
center is located. Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products returned to any
other locations.
This warranty shall not apply to any defect, failure or damage caused by
improper use or improper or inadequate maintenance and care. Tektronix
shall not be obligated to furnish service under this warranty a) to repair
damage resulting from attempts by personnel other than Tektronix
representatives to install, repair or service the product; b) to repair
damage resulting from improper use or connection to incompatible
equipment; or c) to service a product that has been modified or integrated
with other products when the effect of such modification or integration
increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THIS
PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR
IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TEKTRONIX' RESPONSIBILITY TO REPAIR
OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH
OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER
TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE
POSSIBILITY OF SUCH DAMAGES.
Certificate of the Manufacturer/Importer
We hereby certify that the
complies with the RF Interference Suppression requirements
of Amtsbl.ĆVfg 1046/1984.
The German Postal Service was notified that the equipment is
being marketed.
The German Postal Service has the right to reĆtest the series
and to verify that it complies.
TEKTRONIX
Bescheinigung des Herstellers/Importeurs
Hiermit wird bescheinigt, daß der/die/das
in Übereinstimmung mit den Bestimmungen der AamtsblattĆ
Verfugüng 1046/1984 funkentstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen
dieses Gerätes angezeigt und die Berechtigung zur ÜberĆ
prufüng der Serie auf Einhalten der Bestimmungen einĆ
geräumt.
TEKTRONIX
SYSTEMS OSCILLOSCOPE AND ALL INSTALLED OPTIONS
222PS PowerScout POWER
POWER SYSTEMS OSCILLOSCOPE AND ALL INSTALLED OPTIONS
222PS PowerScout
Certificate of the Manufacturer/Importer
We hereby certify that the
complies with the RF Interference Suppression requirements
of Amtsbl.ĆVfg 1046/1984.
The German Postal Service was notified that the equipment is
being marketed.
The German Postal Service has the right to reĆtest the series
and to verify that it complies.
TEKTRONIX
Bescheinigung des Herstellers/Importeurs
Hiermit wird bescheinigt, daß der/die/das
in Übereinstimmung mit den Bestimmungen der AamtsblattĆ
Verfugüng 1046/1984 funkentstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen
dieses Gerätes angezeigt und die Berechtigung zur ÜberĆ
prufüng der Serie auf Einhalten der Bestimmungen einĆ
geräumt.
TEKTRONIX
SYSTEMS OSCILLOSCOPE AND ALL INSTALLED OPTIONS
222PS PowerScout POWER
POWER SYSTEMS OSCILLOSCOPE AND ALL INSTALLED OPTIONS
222PS PowerScout
NOTICE to the user/operator:
The German Postal Service requires that Systems assembled
by the operator/user of this instrument must also comply with
Postal Regulation, Vfg. 1046/1984, Par. 2, Sect. 1.
HINWEIS für den Benutzer/Betreiber:
Die vom Betreiber zusammengestellte Anlage, innerhalb
derer dies Gerät eingesetzt wird, muß ebenfalls den
Voraussetzungen nach Par. 2, Ziff. 1 der Vfg. 1046/1984
genugen.
NOTICE to the user/operator:
The German Postal Service requires that this equipment,
when used in a test setup, may only be operated if the
requirements of Postal Regulation, Vfg. 1046/1984, Par. 2,
Sect. 1.7.1 are complied with.
HINWEIS für den Benutzer/Betreiber:
Dies Gerät darf in Meßaufbauten nur betrieben werden, wenn
die Voraussetzungen des Par. 2, Ziff. 1.7.1 der Vfg. 1046/1984
eingehalten werden.
NOTICE to the user/operator:
The German Postal Service requires that Systems assembled
by the operator/user of this instrument must also comply with
Postal Regulation, Vfg. 1046/1984, Par. 2, Sect. 1.
HINWEIS für den Benutzer/Betreiber:
Die vom Betreiber zusammengestellte Anlage, innerhalb
derer dies Gerät eingesetzt wird, muß ebenfalls den
Voraussetzungen nach Par. 2, Ziff. 1 der Vfg. 1046/1984
genugen.
NOTICE to the user/operator:
The German Postal Service requires that this equipment,
when used in a test setup, may only be operated if the
requirements of Postal Regulation, Vfg. 1046/1984, Par. 2,
Sect. 1.7.1 are complied with.
HINWEIS für den Benutzer/Betreiber:
Dies Gerät darf in Meßaufbauten nur betrieben werden, wenn
die Voraussetzungen des Par. 2, Ziff. 1.7.1 der Vfg. 1046/1984
eingehalten werden.
222PS Operator Manual
i
Welcome
This manual contains the following sections:
H Overview describes the 222PS PowerScout and provides safety
information.
H At A Glance describes the controls and connectors for the 222PS.
H In Detail provides further detail on some aspects of the 222PS,
building on the information contained in At A Glance. The 15
topics of this chapter are in alphabetical order for your conveĆ
nience:
H Acquisition Modes
H Auto Setup
H Calibration
H Capturing Random Events
H Channels
H The Display
H Horizontal Operation
H Maintenance and Repair
H Power
H Probes
H Saving and Recalling Data
H Store Mode
H Triggering
H Vertical Operation
H XY Mode
H Tutorial: Measuring Signals provides stepĆbyĆstep instructions to
get you started making measurements quickly.
222PS Operator Manual
i
Welcome
This manual contains the following sections:
H Overview describes the 222PS PowerScout and provides safety
information.
H At A Glance describes the controls and connectors for the 222PS.
H In Detail provides further detail on some aspects of the 222PS,
building on the information contained in At A Glance. The 15
topics of this chapter are in alphabetical order for your conveĆ
nience:
H Acquisition Modes
H Auto Setup
H Calibration
H Capturing Random Events
H Channels
H The Display
H Horizontal Operation
H Maintenance and Repair
H Power
H Probes
H Saving and Recalling Data
H Store Mode
H Triggering
H Vertical Operation
H XY Mode
H Tutorial: Measuring Signals provides stepĆbyĆstep instructions to
get you started making measurements quickly.
Welcome
ii
H Remote Communication provides information on RSĆ232 commuĆ
nication procedures between the 222PS and a PC.
H Performance Verification describes the procedures necessary to
verify that the 222PS is performing according to specifications.
H Specifications provides complete specifications for the 222PS
PowerScout.
H Accessories describes the standard and optional accessories
available for the 222PS.
H Glossary defines various words used in the text.
H The Index helps you locate information quickly.
NOTE
If you have never used an oscilloscope before, please
read the tutorial in Appendix A before using the 222PS.
Welcome
ii
H Remote Communication provides information on RSĆ232 commuĆ
nication procedures between the 222PS and a PC.
H Performance Verification describes the procedures necessary to
verify that the 222PS is performing according to specifications.
H Specifications provides complete specifications for the 222PS
PowerScout.
H Accessories describes the standard and optional accessories
available for the 222PS.
H Glossary defines various words used in the text.
H The Index helps you locate information quickly.
NOTE
If you have never used an oscilloscope before, please
read the tutorial in Appendix A before using the 222PS.
222PS Operator Manual
iii
Contents
List of Illustrations ix.....................................
List of Tables xiii..........................................
Overview
About the 222PS PowerScout 1Ć1......................
Safety 1Ć2............................................
Symbols and Terms 1Ć2.............................
Specific Precautions 1Ć3............................
At a Glance
Front Panel Controls 2Ć2...............................
Vertical Controls 2Ć3................................
Trigger Controls 2Ć4................................
Horizontal Controls 2Ć5.............................
The Display 2Ć6.......................................
Readouts 2Ć6......................................
Menus and Menu Buttons 2Ć9.......................
Top Panel Controls 2Ć11................................
Side Connectors 2Ć13..................................
Rear Panel Controls and Connectors 2Ć14................
The Tilt Stand 2Ć16.....................................
In Detail
Acquisition Modes 3Ć1.....................................
Kinds of Acquisition Modes 3Ć1........................
Normal Acquisition Mode 3Ć1........................
Average Acquisition Mode 3Ć1.......................
222PS Operator Manual
iii
Contents
List of Illustrations ix.....................................
List of Tables xiii..........................................
Overview
About the 222PS PowerScout 1Ć1......................
Safety 1Ć2............................................
Symbols and Terms 1Ć2.............................
Specific Precautions 1Ć3............................
At a Glance
Front Panel Controls 2Ć2...............................
Vertical Controls 2Ć3................................
Trigger Controls 2Ć4................................
Horizontal Controls 2Ć5.............................
The Display 2Ć6.......................................
Readouts 2Ć6......................................
Menus and Menu Buttons 2Ć9.......................
Top Panel Controls 2Ć11................................
Side Connectors 2Ć13..................................
Rear Panel Controls and Connectors 2Ć14................
The Tilt Stand 2Ć16.....................................
In Detail
Acquisition Modes 3Ć1.....................................
Kinds of Acquisition Modes 3Ć1........................
Normal Acquisition Mode 3Ć1........................
Average Acquisition Mode 3Ć1.......................
Contents
iv
Envelope Acquisition Mode 3Ć2......................
Continuous Envelope Acquisition Mode 3Ć2...........
Selecting an Acquisition Mode 3Ć3.....................
Auto Setup 3Ć5............................................
Procedure 3Ć5........................................
Parameter Effects 3Ć5.................................
Channels 3Ć5......................................
Vertical Scaling 3Ć6.................................
Horizontal Scaling 3Ć6..............................
Low and High Frequencies 3Ć6......................
Calibration 3Ć9............................................
Running the SelfĆCalibration Routine 3Ć9................
Capturing Random Events 3Ć15.............................
Channels 3Ć17.............................................
Selecting a Channel 3Ć17...............................
Displaying a Channel 3Ć18..............................
Setting Channel Coupling 3Ć19..........................
The Display 3Ć21...........................................
Readouts 3Ć21.........................................
Displaying and Clearing the Readouts 3Ć21.............
Inverting the Display 3Ć22...............................
Varying the Brightness 3Ć23.............................
Horizontal Operation 3Ć25..................................
Horizontal Positioning 3Ć25.............................
Seconds per Division 3Ć26..............................
Aliasing 3Ć26.......................................
TimeĆBase Mode 3Ć27...............................
Magnifying the Signal 3Ć29..............................
Maintenance 3Ć31..........................................
Identifying the Firmware Version 3Ć31....................
Repackaging for Shipment 3Ć33.........................
Power 3Ć35................................................
Battery Operation 3Ć35.................................
Connecting the Battery 3Ć35..........................
Charging the Battery 3Ć37............................
Contents
iv
Envelope Acquisition Mode 3Ć2......................
Continuous Envelope Acquisition Mode 3Ć2...........
Selecting an Acquisition Mode 3Ć3.....................
Auto Setup 3Ć5............................................
Procedure 3Ć5........................................
Parameter Effects 3Ć5.................................
Channels 3Ć5......................................
Vertical Scaling 3Ć6.................................
Horizontal Scaling 3Ć6..............................
Low and High Frequencies 3Ć6......................
Calibration 3Ć9............................................
Running the SelfĆCalibration Routine 3Ć9................
Capturing Random Events 3Ć15.............................
Channels 3Ć17.............................................
Selecting a Channel 3Ć17...............................
Displaying a Channel 3Ć18..............................
Setting Channel Coupling 3Ć19..........................
The Display 3Ć21...........................................
Readouts 3Ć21.........................................
Displaying and Clearing the Readouts 3Ć21.............
Inverting the Display 3Ć22...............................
Varying the Brightness 3Ć23.............................
Horizontal Operation 3Ć25..................................
Horizontal Positioning 3Ć25.............................
Seconds per Division 3Ć26..............................
Aliasing 3Ć26.......................................
TimeĆBase Mode 3Ć27...............................
Magnifying the Signal 3Ć29..............................
Maintenance 3Ć31..........................................
Identifying the Firmware Version 3Ć31....................
Repackaging for Shipment 3Ć33.........................
Power 3Ć35................................................
Battery Operation 3Ć35.................................
Connecting the Battery 3Ć35..........................
Charging the Battery 3Ć37............................
222PS Operator Manual
v
Charging the Battery Externally 3Ć37...................
Time Out 3Ć37......................................
Replacing the Battery 3Ć39...........................
Storing the Instrument 3Ć40..........................
Deep Discharge 3Ć40................................
External Power Operation 3Ć41..........................
AC Line Operation 3Ć41..............................
Other Sources of External Power 3Ć42.................
Probes 3Ć43...............................................
Connecting the Probes 3Ć44............................
Configuring the Probes 3Ć45............................
Probe Accessories 3Ć47................................
Saving and Recalling Data 3Ć51.............................
Waveforms 3Ć51........................................
Saving a Waveform 3Ć51.............................
Recalling a Saved Waveform 3Ć53.....................
Setups 3Ć55............................................
Saving a Setup 3Ć55.................................
Recalling a Saved Setup 3Ć57........................
Erasing a Saved Setup 3Ć58..........................
Store Mode 3Ć61...........................................
Triggering 3Ć63.............................................
The Trigger Light 3Ć63..................................
Trigger Source 3Ć64....................................
External Triggering 3Ć65.............................
Motor Trigger Function 3Ć67.............................
Triggering on Motor Drive Signals 3Ć67................
Triggering on 50/60 Hz Line Signals 3Ć67...............
Trigger Coupling 3Ć69..................................
Trigger Slope 3Ć69......................................
Trigger Level 3Ć69......................................
AutoĆLevel 3Ć70.....................................
Trigger Position 3Ć70...................................
Trigger Modes 3Ć71.....................................
Normal 3Ć72........................................
AutoĆBaseline 3Ć72..................................
AutoĆLevel 3Ć72.....................................
222PS Operator Manual
v
Charging the Battery Externally 3Ć37...................
Time Out 3Ć37......................................
Replacing the Battery 3Ć39...........................
Storing the Instrument 3Ć40..........................
Deep Discharge 3Ć40................................
External Power Operation 3Ć41..........................
AC Line Operation 3Ć41..............................
Other Sources of External Power 3Ć42.................
Probes 3Ć43...............................................
Connecting the Probes 3Ć44............................
Configuring the Probes 3Ć45............................
Probe Accessories 3Ć47................................
Saving and Recalling Data 3Ć51.............................
Waveforms 3Ć51........................................
Saving a Waveform 3Ć51.............................
Recalling a Saved Waveform 3Ć53.....................
Setups 3Ć55............................................
Saving a Setup 3Ć55.................................
Recalling a Saved Setup 3Ć57........................
Erasing a Saved Setup 3Ć58..........................
Store Mode 3Ć61...........................................
Triggering 3Ć63.............................................
The Trigger Light 3Ć63..................................
Trigger Source 3Ć64....................................
External Triggering 3Ć65.............................
Motor Trigger Function 3Ć67.............................
Triggering on Motor Drive Signals 3Ć67................
Triggering on 50/60 Hz Line Signals 3Ć67...............
Trigger Coupling 3Ć69..................................
Trigger Slope 3Ć69......................................
Trigger Level 3Ć69......................................
AutoĆLevel 3Ć70.....................................
Trigger Position 3Ć70...................................
Trigger Modes 3Ć71.....................................
Normal 3Ć72........................................
AutoĆBaseline 3Ć72..................................
AutoĆLevel 3Ć72.....................................
Contents
vi
SingleĆSequence 3Ć73...............................
Setting the Trigger Mode 3Ć73........................
Vertical Operation 3Ć75.....................................
Vertical Positioning 3Ć75................................
Volts per Division 3Ć76..................................
Variable Volts per Division 3Ć76.......................
XY Mode 3Ć79..............................................
Entering and Exiting XY Mode 3Ć79......................
Positioning XY Waveforms 3Ć80.........................
Appendices
Appendix A: Tutorial AĆ1...................................
The Screen AĆ1.......................................
Measuring Voltage AĆ2.................................
Measuring PeakĆtoĆPeak Voltages AĆ3................
Using a Ground Reference Point AĆ4.................
Measuring Time AĆ5...................................
Measuring RiseĆ or FallĆtime AĆ7.....................
Appendix B: Remote Communication AĆ9...................
Introductory Information AĆ9...........................
Setting the Baud Rate AĆ11..............................
Command Formats AĆ13................................
Commands, Queries, and Responses AĆ13.............
FrontĆPanel Encoding AĆ20..............................
Vertical Settings AĆ20................................
SEC/DIV Setting AĆ22................................
Trigger Positions, Slope, Source, and Mode Settings AĆ24
Acquisition Mode and Miscellaneous Settings AĆ26......
RSĆ232 Error Codes AĆ28...............................
Status Messages AĆ28...............................
Diagnostic Error Codes AĆ28.........................
Transfer Options AĆ30..................................
Transfer to a Local PC AĆ30...........................
Transfer via Modem AĆ30.............................
RSĆ232 Interface Specifications AĆ32....................
Contents
vi
SingleĆSequence 3Ć73...............................
Setting the Trigger Mode 3Ć73........................
Vertical Operation 3Ć75.....................................
Vertical Positioning 3Ć75................................
Volts per Division 3Ć76..................................
Variable Volts per Division 3Ć76.......................
XY Mode 3Ć79..............................................
Entering and Exiting XY Mode 3Ć79......................
Positioning XY Waveforms 3Ć80.........................
Appendices
Appendix A: Tutorial AĆ1...................................
The Screen AĆ1.......................................
Measuring Voltage AĆ2.................................
Measuring PeakĆtoĆPeak Voltages AĆ3................
Using a Ground Reference Point AĆ4.................
Measuring Time AĆ5...................................
Measuring RiseĆ or FallĆtime AĆ7.....................
Appendix B: Remote Communication AĆ9...................
Introductory Information AĆ9...........................
Setting the Baud Rate AĆ11..............................
Command Formats AĆ13................................
Commands, Queries, and Responses AĆ13.............
FrontĆPanel Encoding AĆ20..............................
Vertical Settings AĆ20................................
SEC/DIV Setting AĆ22................................
Trigger Positions, Slope, Source, and Mode Settings AĆ24
Acquisition Mode and Miscellaneous Settings AĆ26......
RSĆ232 Error Codes AĆ28...............................
Status Messages AĆ28...............................
Diagnostic Error Codes AĆ28.........................
Transfer Options AĆ30..................................
Transfer to a Local PC AĆ30...........................
Transfer via Modem AĆ30.............................
RSĆ232 Interface Specifications AĆ32....................
222PS Operator Manual
vii
RSĆ232 Communication Parameters AĆ32..............
Baud Rates AĆ32....................................
Levels AĆ33.........................................
Maximum Applied Voltage AĆ33.......................
Plotter/Printer Support AĆ33..........................
Messages AĆ33.....................................
Optional Accessories AĆ33..............................
CAT200 AĆ33.......................................
RSĆ232 Interconnection Cables AĆ34...................
Appendix C: Quick Checks AĆ37.............................
General Instructions AĆ37...............................
Conventions AĆ38......................................
Initial Setup Procedure AĆ39............................
Self Cal Tests AĆ39.....................................
Autoset Tests AĆ41.....................................
Appendix D: Performance Tests AĆ43........................
Prerequisites AĆ43......................................
Equipment Required AĆ44...............................
Preparation AĆ47.......................................
Preliminaries AĆ47......................................
Vertical Checks AĆ48...................................
Horizontal Check AĆ57..................................
Trigger Checks AĆ60....................................
Appendix E: Specifications AĆ65.............................
Nominal Traits AĆ65.....................................
Warranted Characteristics AĆ71..........................
Typical Characteristics AĆ76.............................
Appendix F: Accessories AĆ79...............................
Standard Accessories AĆ79.............................
Optional Accessories AĆ80..............................
Instrument Options AĆ81................................
External Power AC Adapter Options AĆ81.................
222PS Operator Manual
vii
RSĆ232 Communication Parameters AĆ32..............
Baud Rates AĆ32....................................
Levels AĆ33.........................................
Maximum Applied Voltage AĆ33.......................
Plotter/Printer Support AĆ33..........................
Messages AĆ33.....................................
Optional Accessories AĆ33..............................
CAT200 AĆ33.......................................
RSĆ232 Interconnection Cables AĆ34...................
Appendix C: Quick Checks AĆ37.............................
General Instructions AĆ37...............................
Conventions AĆ38......................................
Initial Setup Procedure AĆ39............................
Self Cal Tests AĆ39.....................................
Autoset Tests AĆ41.....................................
Appendix D: Performance Tests AĆ43........................
Prerequisites AĆ43......................................
Equipment Required AĆ44...............................
Preparation AĆ47.......................................
Preliminaries AĆ47......................................
Vertical Checks AĆ48...................................
Horizontal Check AĆ57..................................
Trigger Checks AĆ60....................................
Appendix E: Specifications AĆ65.............................
Nominal Traits AĆ65.....................................
Warranted Characteristics AĆ71..........................
Typical Characteristics AĆ76.............................
Appendix F: Accessories AĆ79...............................
Standard Accessories AĆ79.............................
Optional Accessories AĆ80..............................
Instrument Options AĆ81................................
External Power AC Adapter Options AĆ81.................
Contents
viii
Glossary & Index
Glossary GĆ1..............................................
Index IĆ1.................................................
Contents
viii
Glossary & Index
Glossary GĆ1..............................................
Index IĆ1.................................................
222PS Operator Manual
ix
List of Illustrations
Figure 2Ć1:ă222PS Front Panel 2Ć2...........................
Figure 2Ć2:ăVertical Controls 2Ć3.............................
Figure 2Ć3:ăTrigger Controls 2Ć4.............................
Figure 2Ć4:ăHorizontal Controls 2Ć5..........................
Figure 2Ć5:ăVertical Readouts 2Ć7............................
Figure 2Ć6:ăSaved Waveform Readouts 2Ć8...................
Figure 2Ć7:ăTrigger and Horizontal Readouts 2Ć9...............
Figure 2Ć8:ăParts of a Menu 2Ć10..............................
Figure 2Ć9:ă222PS Top Panel 2Ć11............................
Figure 2Ć10:ăSide of 222PS, Storage Pouch Removed 2Ć13......
Figure 2Ć11:ă222PS Rear Panel 2Ć14..........................
Figure 2Ć12:ăThe 222PS With Tilt Stand 2Ć16...................
Figure 3Ć1:ăNormal, Average, and Envelope Signals 3Ć3........
Figure 3Ć2:ăThe Acquisition Menu 3Ć3........................
Figure 3Ć3:ăThe Auxiliary Functions Menu 3Ć10.................
Figure 3Ć4:ăThe Calibration Menu 3Ć10........................
Figure 3Ć5:ăThe Ground External Trigger Calibration Menu 3Ć12...
Figure 3Ć6:ăChannel One Selected 3Ć17.......................
Figure 3Ć7:ăThe Channel Menu 3Ć18...........................
Figure 3Ć8:ăThe Display Menu 3Ć21...........................
Figure 3Ć9:ăNormal and Inverted Waveforms 3Ć22...............
Figure 3Ć10:ăThe Horizontal Controls 3Ć25.....................
Figure 3Ć11:ăAn Aliased Waveform 3Ć27.......................
Figure 3Ć12:ăThe Auxiliary Functions Menu 3Ć32................
Figure 3Ć13:ăXY Alignment Menu 3Ć32.........................
Figure 3Ć14:ăThe Firmware Version 3Ć33.......................
Figure 3Ć15:ăSide View Without Battery Cover 3Ć36..............
Figure 3Ć16:ăThe Auxiliary Functions Menu 3Ć38................
Figure 3Ć17:ăThe Configuration Menu 3Ć38.....................
Figure 3Ć18:ăSide View Showing Probe Connectors
(Pouch Removed) 3Ć44......................................
Figure 3Ć19:ăThe Auxiliary Functions Menu 3Ć45................
222PS Operator Manual
ix
List of Illustrations
Figure 2Ć1:ă222PS Front Panel 2Ć2...........................
Figure 2Ć2:ăVertical Controls 2Ć3.............................
Figure 2Ć3:ăTrigger Controls 2Ć4.............................
Figure 2Ć4:ăHorizontal Controls 2Ć5..........................
Figure 2Ć5:ăVertical Readouts 2Ć7............................
Figure 2Ć6:ăSaved Waveform Readouts 2Ć8...................
Figure 2Ć7:ăTrigger and Horizontal Readouts 2Ć9...............
Figure 2Ć8:ăParts of a Menu 2Ć10..............................
Figure 2Ć9:ă222PS Top Panel 2Ć11............................
Figure 2Ć10:ăSide of 222PS, Storage Pouch Removed 2Ć13......
Figure 2Ć11:ă222PS Rear Panel 2Ć14..........................
Figure 2Ć12:ăThe 222PS With Tilt Stand 2Ć16...................
Figure 3Ć1:ăNormal, Average, and Envelope Signals 3Ć3........
Figure 3Ć2:ăThe Acquisition Menu 3Ć3........................
Figure 3Ć3:ăThe Auxiliary Functions Menu 3Ć10.................
Figure 3Ć4:ăThe Calibration Menu 3Ć10........................
Figure 3Ć5:ăThe Ground External Trigger Calibration Menu 3Ć12...
Figure 3Ć6:ăChannel One Selected 3Ć17.......................
Figure 3Ć7:ăThe Channel Menu 3Ć18...........................
Figure 3Ć8:ăThe Display Menu 3Ć21...........................
Figure 3Ć9:ăNormal and Inverted Waveforms 3Ć22...............
Figure 3Ć10:ăThe Horizontal Controls 3Ć25.....................
Figure 3Ć11:ăAn Aliased Waveform 3Ć27.......................
Figure 3Ć12:ăThe Auxiliary Functions Menu 3Ć32................
Figure 3Ć13:ăXY Alignment Menu 3Ć32.........................
Figure 3Ć14:ăThe Firmware Version 3Ć33.......................
Figure 3Ć15:ăSide View Without Battery Cover 3Ć36..............
Figure 3Ć16:ăThe Auxiliary Functions Menu 3Ć38................
Figure 3Ć17:ăThe Configuration Menu 3Ć38.....................
Figure 3Ć18:ăSide View Showing Probe Connectors
(Pouch Removed) 3Ć44......................................
Figure 3Ć19:ăThe Auxiliary Functions Menu 3Ć45................
Contents
x
Figure 3Ć20:ăThe Configuration Menu 3Ć46.....................
Figure 3Ć21:ăThe Probe Menu 3Ć46............................
Figure 3Ć22:ăProbe and Accessories 3Ć48......................
Figure 3Ć23:ăSaved Waveforms Menu 3Ć52.....................
Figure 3Ć24:ăSaved Waveform Parameters 3Ć53.................
Figure 3Ć25:ăThe Recall Waveforms Menu 3Ć54.................
Figure 3Ć26:ăThe Setup Menu 3Ć56............................
Figure 3Ć27:ăThe Save Setup Menu 3Ć56.......................
Figure 3Ć28:ăThe Recall Setup Menu 3Ć57......................
Figure 3Ć29:ăThe Erase Setups Menu 3Ć59.....................
Figure 3Ć30:ăHorizontal Readouts in Store Mode 3Ć61...........
Figure 3Ć31:ăTrigger Controls 3Ć63............................
Figure 3Ć32:ăThe Trigger Source Menu 3Ć64....................
Figure 3Ć33:ăRear Panel External Trigger Connectors 3Ć65.......
Figure 3Ć34:ăMotor Drive Signals Separated by a Low Region 3Ć68
Figure 3Ć35:ăMotor Drive Signals Separated by a High Region 3Ć68
Figure 3Ć36:ăTrigger Position Menu 3Ć71.......................
Figure 3Ć37:ăThe Trigger Mode Menu 3Ć74.....................
Figure 3Ć38:ăThe Vertical Controls 3Ć75........................
Figure 3Ć39:ăThe Display Menu 3Ć79..........................
Figure AĆ1:ăThe Screen Markings AĆ2........................
Figure AĆ2:ăMeasuring PeakĆtoĆPeak Voltages AĆ3.............
Figure AĆ3:ăMeasuring With Respect to Ground AĆ5............
Figure AĆ4:ăMeasuring Time AĆ6.............................
Figure AĆ5:ăMeasuring RiseĆTime AĆ8.........................
Figure AĆ6:ăRSĆ232 Communications Port AĆ10.................
Figure AĆ7:ăCommunication Between the 222PS and a PC AĆ10..
Figure AĆ8:ăThe Auxiliary Functions Menu AĆ11.................
Figure AĆ9:ăThe Configuration Menu AĆ12......................
Figure AĆ10:ăThe Baud Settings Menu AĆ12....................
Figure AĆ11:ăCommands, Queries, and Responses AĆ14.........
Figure AĆ12:ăRSĆ232 Interconnection Cable Pin Wiring AĆ34......
Figure AĆ13:ăInitial Setup for Vertical Checks AĆ49...............
Figure AĆ14:ăSetup for Input Coupling Check AĆ52..............
Figure AĆ15:ăSetup for Probe Compensation Check AĆ55........
Figure AĆ16:ăSetup for Analog Bandwidth Check AĆ56...........
Contents
x
Figure 3Ć20:ăThe Configuration Menu 3Ć46.....................
Figure 3Ć21:ăThe Probe Menu 3Ć46............................
Figure 3Ć22:ăProbe and Accessories 3Ć48......................
Figure 3Ć23:ăSaved Waveforms Menu 3Ć52.....................
Figure 3Ć24:ăSaved Waveform Parameters 3Ć53.................
Figure 3Ć25:ăThe Recall Waveforms Menu 3Ć54.................
Figure 3Ć26:ăThe Setup Menu 3Ć56............................
Figure 3Ć27:ăThe Save Setup Menu 3Ć56.......................
Figure 3Ć28:ăThe Recall Setup Menu 3Ć57......................
Figure 3Ć29:ăThe Erase Setups Menu 3Ć59.....................
Figure 3Ć30:ăHorizontal Readouts in Store Mode 3Ć61...........
Figure 3Ć31:ăTrigger Controls 3Ć63............................
Figure 3Ć32:ăThe Trigger Source Menu 3Ć64....................
Figure 3Ć33:ăRear Panel External Trigger Connectors 3Ć65.......
Figure 3Ć34:ăMotor Drive Signals Separated by a Low Region 3Ć68
Figure 3Ć35:ăMotor Drive Signals Separated by a High Region 3Ć68
Figure 3Ć36:ăTrigger Position Menu 3Ć71.......................
Figure 3Ć37:ăThe Trigger Mode Menu 3Ć74.....................
Figure 3Ć38:ăThe Vertical Controls 3Ć75........................
Figure 3Ć39:ăThe Display Menu 3Ć79..........................
Figure AĆ1:ăThe Screen Markings AĆ2........................
Figure AĆ2:ăMeasuring PeakĆtoĆPeak Voltages AĆ3.............
Figure AĆ3:ăMeasuring With Respect to Ground AĆ5............
Figure AĆ4:ăMeasuring Time AĆ6.............................
Figure AĆ5:ăMeasuring RiseĆTime AĆ8.........................
Figure AĆ6:ăRSĆ232 Communications Port AĆ10.................
Figure AĆ7:ăCommunication Between the 222PS and a PC AĆ10..
Figure AĆ8:ăThe Auxiliary Functions Menu AĆ11.................
Figure AĆ9:ăThe Configuration Menu AĆ12......................
Figure AĆ10:ăThe Baud Settings Menu AĆ12....................
Figure AĆ11:ăCommands, Queries, and Responses AĆ14.........
Figure AĆ12:ăRSĆ232 Interconnection Cable Pin Wiring AĆ34......
Figure AĆ13:ăInitial Setup for Vertical Checks AĆ49...............
Figure AĆ14:ăSetup for Input Coupling Check AĆ52..............
Figure AĆ15:ăSetup for Probe Compensation Check AĆ55........
Figure AĆ16:ăSetup for Analog Bandwidth Check AĆ56...........
222PS Operator Manual
xi
Figure AĆ17:ăSetup for Horizontal Test AĆ58....................
Figure AĆ18:ăSetup for Trigger Checks AĆ61....................
Figure AĆ19:ăSetup for External Trigger Sensitivity Check AĆ63....
Figure AĆ20:ăMaximum NormalĆMode Voltage Versus
Frequency Derating Curve AĆ67...............................
Figure AĆ21:ăMaximum CommonĆMode Voltage Versus
Frequency Derating Curve AĆ68...............................
222PS Operator Manual
xi
Figure AĆ17:ăSetup for Horizontal Test AĆ58....................
Figure AĆ18:ăSetup for Trigger Checks AĆ61....................
Figure AĆ19:ăSetup for External Trigger Sensitivity Check AĆ63....
Figure AĆ20:ăMaximum NormalĆMode Voltage Versus
Frequency Derating Curve AĆ67...............................
Figure AĆ21:ăMaximum CommonĆMode Voltage Versus
Frequency Derating Curve AĆ68...............................
Contents
xii
Contents
xii
222PS Operator Manual
xiii
List of Tables
TableĂ3Ć1:ă Auto Setup Settings 3Ć7..........................
TableĂ3Ć2:ă TimeĆBase Modes 3Ć28............................
TableĂ3Ć3:ă AutoĆLevel Trigger Interval Time Limits 3Ć73..........
TableĂAĆ1:ăBUT Button Codes AĆ15...........................
TableĂAĆ2:ăDAC Code and Value Data AĆ17.....................
TableĂAĆ3:ăChannel Settings AĆ21.............................
TableĂAĆ4:ăSecondsĆperĆDivision and Misc. Settings AĆ23........
TableĂAĆ5:ăTrigger Position, Slope, Source, and Mode Settings AĆ25
TableĂAĆ6:ăAcquisition Mode and Misc. Settings AĆ27............
TableĂAĆ7:ă222PS Interconnect Pin Assignments AĆ34...........
TableĂAĆ8:ăTest Equipment AĆ45..............................
TableĂAĆ9:ăVoltsĆperĆDivision Accuracy Settings AĆ53............
TableĂAĆ10:ăNominal TraitsĊVertical System AĆ65..............
TableĂAĆ11:ăNominal TraitsĊHorizontal System AĆ68............
TableĂAĆ12:ăNominal TraitsĊTriggering System AĆ69............
TableĂAĆ13:ăNominal TraitsĊDisplay System AĆ69..............
TableĂAĆ14:ăNominal TraitsĊPower System AĆ70................
TableĂAĆ15:ăNominal TraitsĊCommunications Interface AĆ70.....
TableĂAĆ16:ăNominal TraitsĊMechanical AĆ71..................
TableĂAĆ17:ăWarranted CharacteristicsĊVertical System AĆ72....
TableĂAĆ18:ăWarranted CharacteristicsĊHorizontal System AĆ74.
TableĂAĆ19:ăWarranted CharacteristicsĊTriggering System AĆ74..
TableĂAĆ20:ăWarranted CharacteristicsĊ
ąąąEnvironmental, Safety, and Reliability AĆ75...............
TableĂAĆ21:ăTypical CharacteristicsĊVertical System AĆ76.......
TableĂAĆ22:ăTypical CharacteristicsĊHorizontal System AĆ77.....
TableĂAĆ23:ăTypical CharacteristicsĊTriggering System AĆ77.....
TableĂAĆ24:ăTypical CharacteristicsĊPower System AĆ77........
TableĂAĆ25:ăStandard Accessories AĆ79.......................
TableĂAĆ26:ăOptional Accessories AĆ80........................
222PS Operator Manual
xiii
List of Tables
TableĂ3Ć1:ă Auto Setup Settings 3Ć7..........................
TableĂ3Ć2:ă TimeĆBase Modes 3Ć28............................
TableĂ3Ć3:ă AutoĆLevel Trigger Interval Time Limits 3Ć73..........
TableĂAĆ1:ăBUT Button Codes AĆ15...........................
TableĂAĆ2:ăDAC Code and Value Data AĆ17.....................
TableĂAĆ3:ăChannel Settings AĆ21.............................
TableĂAĆ4:ăSecondsĆperĆDivision and Misc. Settings AĆ23........
TableĂAĆ5:ăTrigger Position, Slope, Source, and Mode Settings AĆ25
TableĂAĆ6:ăAcquisition Mode and Misc. Settings AĆ27............
TableĂAĆ7:ă222PS Interconnect Pin Assignments AĆ34...........
TableĂAĆ8:ăTest Equipment AĆ45..............................
TableĂAĆ9:ăVoltsĆperĆDivision Accuracy Settings AĆ53............
TableĂAĆ10:ăNominal TraitsĊVertical System AĆ65..............
TableĂAĆ11:ăNominal TraitsĊHorizontal System AĆ68............
TableĂAĆ12:ăNominal TraitsĊTriggering System AĆ69............
TableĂAĆ13:ăNominal TraitsĊDisplay System AĆ69..............
TableĂAĆ14:ăNominal TraitsĊPower System AĆ70................
TableĂAĆ15:ăNominal TraitsĊCommunications Interface AĆ70.....
TableĂAĆ16:ăNominal TraitsĊMechanical AĆ71..................
TableĂAĆ17:ăWarranted CharacteristicsĊVertical System AĆ72....
TableĂAĆ18:ăWarranted CharacteristicsĊHorizontal System AĆ74.
TableĂAĆ19:ăWarranted CharacteristicsĊTriggering System AĆ74..
TableĂAĆ20:ăWarranted CharacteristicsĊ
ąąąEnvironmental, Safety, and Reliability AĆ75...............
TableĂAĆ21:ăTypical CharacteristicsĊVertical System AĆ76.......
TableĂAĆ22:ăTypical CharacteristicsĊHorizontal System AĆ77.....
TableĂAĆ23:ăTypical CharacteristicsĊTriggering System AĆ77.....
TableĂAĆ24:ăTypical CharacteristicsĊPower System AĆ77........
TableĂAĆ25:ăStandard Accessories AĆ79.......................
TableĂAĆ26:ăOptional Accessories AĆ80........................
Contents
xiv
TableĂAĆ27:ăInstrument Options AĆ81..........................
TableĂAĆ28:ăExternal Power AC Adapter Options AĆ81...........
Contents
xiv
TableĂAĆ27:ăInstrument Options AĆ81..........................
TableĂAĆ28:ăExternal Power AC Adapter Options AĆ81...........
/