3com TokenLink 3C339 Release note

3com
Brand
3com
Model
TokenLink 3C339
Type
Release note

3com TokenLink 3C339 is a PCI network interface card that provides fast and reliable network connectivity. It is compatible with NetWare 3.12 servers and supports Client 32 installations in DOS and Windows 3.1 systems. The card also includes a driver for Windows NT installations in multiprocessor systems. Additionally, the 3com TokenLink 3C339 is designed to work seamlessly with DEC PCs, although power management must be disabled for proper operation.

3com TokenLink 3C339 is a PCI network interface card that provides fast and reliable network connectivity. It is compatible with NetWare 3.12 servers and supports Client 32 installations in DOS and Windows 3.1 systems. The card also includes a driver for Windows NT installations in multiprocessor systems. Additionally, the 3com TokenLink 3C339 is designed to work seamlessly with DEC PCs, although power management must be disabled for proper operation.

®
R
ELEASE
N
OTE
FOR
THE
T
OKEN
L
INK
V
ELOCITY
PCI NIC
Part No. 09-1252-000/June 1997
This release note contains information about the
3Com
®
TokenLink
®
Velocity
™
PCI network interface
card (3C339 NIC). This information was not available
when the user guide supplied with the NIC was printed.
For the latest information about the 3C339 NIC, read
the README.TXT file on the
TokenDisk
®
diskette
supplied with the product.
Error in User Guide
Chapter 3 of the user guide states incorrectly that the
3C3X9.LAN driver can be used with NetWare 3.11 servers.
This driver conforms to the Novell ODI 3.3 specification;
therefore, it cannot be used with NetWare 3.11.
For details on this driver, see the next section,
“NetWare Server/Client 32 Driver.”
NetWare Server/Client 32 Driver
If you are using the 3C3X9.LAN driver with NetWare 3.12
servers, you need to apply the following software patches,
which are available from the Novell Web site,
www.novell.com:
■
LANDR9
■
312PTA.EXE
The \CLIENT32 directory on
TokenDisk
diskette #2 contains
a driver and files needed for Client 32 installations. The
CLIENT32.TXT text file located in the same directory
describes how to install Client 32 in DOS or
Windows 3.1 systems.
09-1252-000 Page 1 Thursday, June 19, 1997 1:45 PM
2
R
ELEASE
N
OTE
FOR
THE
T
OKEN
L
INK
V
ELOCITY
PCI NIC
Windows NT Driver in Multiprocessor Systems
A directory on
TokenDisk
diskette #2 contains files
required for Windows NT driver installation in
multiprocessor systems.
If you are installing the Windows NT driver in a
multiprocessor system, enter the following path
when the installation procedure prompts for the
path to the driver:
a:/ntmp
Power Management in DEC PCs
If you are installing the 3C339 NIC in DEC PCs, you must
disable power management. For details on disabling
power management, see your PC documentation.
3Com, TokenLink, and TokenDisk are registered trademarks and Velocity
is a trademark of 3Com Corporation. DEC is a trademark of Digital
Equipment Corporation. NetWare and Novell are registered trademarks
of Novell, Inc. Windows and Windows NT are registered trademarks of
Microsoft Corporation. Other brand and product names may be
registered trademarks or trademarks of their respective holders.
Copyright © 1997, 3Com Corporation.
09-1252-000 Page 2 Thursday, June 19, 1997 1:45 PM
  • Page 1 1
  • Page 2 2

3com TokenLink 3C339 Release note

3com
Brand
3com
Model
TokenLink 3C339
Type
Release note

3com TokenLink 3C339 is a PCI network interface card that provides fast and reliable network connectivity. It is compatible with NetWare 3.12 servers and supports Client 32 installations in DOS and Windows 3.1 systems. The card also includes a driver for Windows NT installations in multiprocessor systems. Additionally, the 3com TokenLink 3C339 is designed to work seamlessly with DEC PCs, although power management must be disabled for proper operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents