Thermasol 15-1010-MB Installation guide

Thermasol
Brand
Thermasol
Model
15-1010-MB
Type
Installation guide

This manual is also suitable for

2. Wrap the nipple with Teflon Tape, connect with water supply.
1. Slide the Square Flange a bit upper away from the Nipple.
4. Turn on water for testing.
3. Tighten securely with wrench.
Square Body Spray
Installation Instruction
Dimensional Drawing
a) To maintain the appearance, ensure it is cleaned only using a clean soft
damp cloth.
b) A solution of warm water and mild liquid detergent may be used where necessary
and then rinsed thoroughly. Abrasive cleaners or acidic cleaners MUST NOT BE
USED under any circumstances. Avoid contact with solvents.
c) Ple
ase use non-return valves on your shower system.
d) Please retain these instructions for future reference.
Custom shower systems are sized to the user or users.
Bodysprays are normally placed at the upper back, middle back,and upper thigh.
Always position bodysprays according to the preferences of the user(s).
The plumber should install a properly anchored
1/2" female pipe fitting (i.e. a drop-ear elbow) recessed into the wall firstly.
1
2
Nipple
Flange
water pipe
wood stud
Drop Ear Elbow
Front view for drop ear elbow
with water pipe.
(Excluded Drop Ear Elbow
and water pipe)
Body spray placement:
Installation
Aftercare
81233_NC
  • Page 1 1

Thermasol 15-1010-MB Installation guide

Thermasol
Brand
Thermasol
Model
15-1010-MB
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents