TNE1302
OperatingInstructions
170mm
250mm
All manuals and user guides at all-guides.com
all-guides.com
- 1 -
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.
Before Connection ................................................... 2
For your safety ........................................................................ 2
Precautions .............................................................................. 2
Control Section ........................................................ 3
DVD Player ............................................................................. 3
Amplifier ................................................................................. 3
Remote control ........................................................................ 4
Connection ............................................................... 5
Connecting to a TV set
............................................................ 5
Connecting the Speakers ......................................................... 5
Connect to AM antenna .......................................................... 5
Connecting Auxiliary Equipment ............................................ 6
Connecting to a digital amplifier ............................................. 6
Connecting the Control Cable ................................................. 6
Connecting the AC Power Cord .............................................. 6
Installation of Batteries ........................................... 7
Turning the Power On and Off ................................ 7
Sound Quality/Field ................................................ 7
Adjusting the volume
.............................................................. 7
Preset equalizer ........................................................................ 7
Adjusting the super bass .......................................................... 7
Control the Loudness .............................................................. 8
Changing the VFD Darkness .................................................. 8
Listening to Radio Broadcasts ................................. 8
Tuning in a station ................................................................... 8
Presetting stations .................................................................... 8
To change the FM reception mode .......................................... 9
Function Menu Setting List ..................................... 9
General Setup Page ................................................................. 9
Audio Setup Page .................................................................... 9
Video Setup Page .................................................................. 10
Preference Page ..................................................................... 10
Password Setup Page ............................................................. 10
Use the Discs ......................................................... 11
Normal playing ...................................................................... 11
Display the Playing Information ........................................... 12
Program playing .................................................................... 12
Repeat playing ....................................................................... 12
Fast playing ........................................................................... 13
Skip select track .................................................................... 13
Search the playing time ......................................................... 13
Zoom play and level move function ...................................... 14
Play picture CD disc .............................................................. 14
Advanced Operations ............................................ 15
Select menu ........................................................................... 15
Select angle ........................................................................... 15
Select subtitle ........................................................................ 15
Select language ...................................................................... 15
Setting the Clock ................................................... 16
Setting the Sleep Timer ......................................... 16
Setting the Daily Timer ......................................... 17
Protect the Disc ..................................................... 17
Troubleshooting .................................................... 18
Specification .......................................................... 19
Accessories ............................................................ 20
Table of Contents
All manuals and user guides at all-guides.com
- 2 -
Laser Product
This product is equipped with low power laser equipment inside, for using safety, dont take apart any
covers or try to take apart the product inside. Please contact the qualified personnel for repairing.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
Caution:
To prevent fire or shock hazard, do not expose this equipment to rain or moisture place.
Power Requirement
Because the power requirement of the electric products are different in various places, so before you use
this product, make sure that the power requirement of the product is complied to the power that the native
district supplies.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Before Connection
Thank you for purchasing this DVD 2 channel component system, in order to fully utilize this system, please read
this instruction book carefully before use it.
For your safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CLASS 1
LASER PRODUCT
Precautions
w Before operating this system, check if the voltage of this system is identical with the voltage of your local power
supply.
w To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
w Do not place this unit near strong magnetic field.
w Do not place this unit in an unstable or sloped position. Keep this unit in a place with good ventilation.
w Do not attempt to clean the unit with chemical, solvent, gas oil, paint and pesticide.
w Do not drop metal objects into the system.
w Do not handle the power cord with wet hands!
w When unplugging the system from the wall outlet, always pull the plug, not the power cord.
w There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.
Caution:
This product is equipped with low power la-
ser equipment inside, for your safety, dont
open the laser radiation protective
equipment. Dont look at the laser radiation
district when the equipment is operating.
All manuals and user guides at all-guides.com
- 3 -
Control Section
DVD Player
1. Remote Sensor
2. Standby Button
3. VFD Display Lens
4. Disc Door
5. Clock Button
6. Vocal Mode Select / Language Select Button
Memory Button
7. Previous Button
Tuning Backward Button
8. Play/Pause Button
Preset Stations Button
9. Next Button
Tuning Forward Button
10. Stop/Return Button
Band Switch
11. Repeat Button
MONO/Stereo Select Button
12. Open/Close Button
13. Optical Fibre Output Terminal
14. Video Output Terminal
15. Power Control Cable Socket
16. FM Antenna
17. AM Antenna Socket
Amplifier
1. Loudness Button
2. Preset Equalizer Button
3. Volume Control Knob
4. Function Select Button
5. Headphone Jack
All manuals and user guides at all-guides.com
- 4 -
6. Super Woofer Speaker Box Output Terminal
7. Power Control Cable Socket
8. AUX1 Input Terminals (L&R)
9. AUX2 Input Terminals (L&R)
10. Speaker Box Output Terminals (L&R)
11. AC Power Cord
Remote control
11. Fast Reverse Button
Tuning Backward Button
12. Volume Down Button
13. Previous Button
Channel Select Backward Button
14. Play/Pause Button
MONO/Stereo Select Button
15. Clock Button
16. Direction Button (
)
17. Direction Button ( )
18. TUNER Function Button
Band Switch
19. PAL/NTSC Select Button
DVD Function Button
20. Mute Button
21. Vocal Mode Select Button
Language Select Button
22. Function Setting Button
23. Subtitle Button
24. Title Button
25. Time Search Button
26. Zoom Button
27. Repeat A-B Button
28. Loudness Button
29. Super Bass Button
30. Fast Forward Button
Tuning Forward Button
31. Volume Up Button
32. Next Button
Channel Select Forward Button
33. Stop/Return Button
Memory Button
34. Sleep Button
Timer Button
35. Confirm Button
36. Direction Button (
)
37. Direction Button ( )
38. AUX2 Function Button
39. AUX1 Function Button
1. Standby Button
2. PBC Button
Root Button
3. Number Buttons
4. OSD Button
5. Angle Select Button
6. Program Button
7. Repeat Button
8. Step Button
9. Darkness Button
10. Preset Equalizer Button
All manuals and user guides at all-guides.com
- 5 -
Connection
Caution: Turn off all of the unit power sources before connection.
Connecting to a TV set
Connect the TV video input terminal to the DVD plays video output terminal with the video cable.
Connection precautions
Some setting may be necessary on the TV set.
* According to the TVs color system setting, press the PAL/NTSC select button (N/P) on the remote control to
select PAL or NTSC video output mode.
* If the unit is connected to a wide screen TV, then set TV Displayed as is Wide in the General Setup Pagele item.
* If the unit is connected to a normal TV, then set TV Displayed as is Normal/PS or in Normal/LB in the General
Setup Page item.
Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cords with a silver line to the (+) (L) (R) terminals and cords with a gold line to the (-) (G) terminals.
If you has the sub-woofer speaker, you can connect the woofer output terminal from the unit of the rear and the input
terminal of the sub-woofer speaker rear with the speaker cord.
Connection precautions
1. The units output has wide dynamic range, so the amplifiers volume should be moderated, if other speakers are
used, they must be chosed correctly according to our speakers specification, or the loud speaker will be damaged
by the heavy volume.
2. Before connect or cut short the units power, please turn the volume to minimum firstly or it may damage the
loudspeaker.
Connect to AM antenna
AM loop antenna
DVD plays terminal board
TV Set
Right Speaker Box
Back View
Left Speaker Box
Back View
Connect the cords to (-) terminals
All manuals and user guides at all-guides.com
all-guides.com
- 6 -
a. Open the AM antenna terminals on the rear of the unit.
b. Attach the AM loop to its base by snapping the tabs on the loop into
the slot in the base.
c. Close each of the terminals to securely after connecting the antenna.
Rotate AM ring shape antenna until the reception is acceptable. (Don't
place the AM ring shape antenna on the units cover, as this will nega-
tively affect the reception)
Connecting Auxiliary Equipment
Connect signal cords between the AUX input terminals on the amplifier and the output terminals of your auxiliary
equipment. You can listen to this source.
Connecting to a digital amplifier
Use optical fibre cable to connect the DVD player's optical fibre output jack with other amplifier's optical fibre, input
jack, for superior digital sound effects .
Connecting the Control Cable
Connect signal line between the power control cable on the players and the amplifiers of the back board.
Connecting the AC Power Cord
Insert the AC power cord into a wall outlet, and your system is at your command!
Caution: Be sure to unplug the power cord from the outlet when going out or if the system is not in use for an
extended period of time.
DVD plays terminal board
Auxiliary Equipment
DVD plays terminal board
With digital signal input terminals DTS,
Dolby Digital signal decode amplifier
DVD plays terminal board
Amplifiers terminal board
All manuals and user guides at all-guides.com
- 7 -
Installation of Batteries
1. Remove the battery compartment cover.
2. Insert two batteries (size AA) correctly, so that the + and - polarities match the polarity diagrams in the battery
compartment.
* When the batteries are exhausted, the remote control will no longer operate the system. Replace both batteries at
the same time with new ones.
* Dont use an old battery with a new one.
* Dont use different types of batteries together.
* When the remote control is not used for a long period of time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
Turning the Power On and Off
All the operational functions will be available for selection once the unit is turned on (standby mode).
Turning the System On
Press the standby button (STANDBY) to turn the system on from standby mode.
Caution: Once the system has been turned on, it will always return to the last mode it was operated in.
Turning the System Off
Press the standby button (STANDBY) again to turn the system off (called Standby Mode), the clock will be dis-
played on the VFD.
Caution: Be sure to unplug the power cord from the outlet when going out or the system is not in use for an
extended period of time.
Sound Quality/Field
Adjusting the volume
Rotate the multi control knob (- MULTI CONTROL +) clockwise or counter clockwise on the unit or press the
volume up/down buttons (VOL +/-) on the remote control to increase or decrease the volume.
- Press the MUTE button on the remote control in playing mode, the sound will be eliminated, press the button
again to resume sound. (Note: The mute function applies to amplifier unit only, it is not available for optical fiber
output and coaxial output.)
- For private listening, you can connect a pair of headphones to the phones jack on the unit, no sound comes out of
the speakers. (Note: Be sure to turn down the volume before connecting or putting on headphones.)
Preset equalizer
You can adjust the sound reproduced simply by choosing from different preset equalizations. Press the preset equal-
izer button (EQ) repeatedly to select cyclically one of the following different preset equalizations:
No display : Normal sound
POPS : Vocal sound is intensified
JAZZ : For jazz
CLASSIC : For classic
ROCK : For rock
Adjusting the super bass
You can reinforce the bass sound to maintain rich, full bass at low volume:
Press the super bass button (S-BASS) on the remote control to get the effect, the BASS will display on the VFD.
Press the button again to cancel the effect.
All manuals and user guides at all-guides.com
- 8 -
Control the Loudness
This unit has loudness function, it can automatically increase the bass sound effect at low volume (the higher volume,
the smaller bass increase), which improves the output sound. You only need to press the loudness button (LOUDNESS)
to obtain the loudness function when it is playing, LOUDNESS will be displayed on the VFD.
Changing the VFD Darkness
This unit has set several settings for you to adjust the VFD screen's brightness. You only need to press the VFD
darkness select button (DARKNESS) on the remote control in standby mode, then choose the proper lighting to be
used.
Listening to Radio Broadcasts
You can listen to FM and AM stations. Stations can be tuned in manually, automatically or from preset memory
storage.
Caution: Before listening to the radio, please check that both the FM and AM antennas are correctly connected.
Tuning in a station
1. Repeatedly press the function select button (FUNCTION) on the unit or directly press tuner function button
(TUNER) on the remote control to select TUNER function.
2. Press the band switch button (BAND) to select the band.
3. Use one of the following methods to select a station.
w Manual tuning
Press the tuning backward button (TU-) or tuning forward button (TU+) repeatedly to move from frequency to
frequency until you find the station you want.
w Auto tuning
If you press and hold the tuning backward button (TU-) or tuning forward button (TU+) for one second or more,
the frequency changes down, or up, automatically until a station is found.
w Preset tuning (Possible only after presetting stations)
Press the preset stations button (PRESET) on the unit or channel select backward button (CH-) or channel select
forward button (CH+) on the remote control one by one to select the preset number to select the desired preset
number. Its band and frequency are displayed on the VFD.
Presetting stations
You can preset up to 16 FM stations and up to 16 AM stations.
1. Tuning in the desired station.
2. Press the memory button (MEM) on the unit or memory button (MEMORY) on the remote control, the MEM
will flash on the VFD.
3. Press the preset stations button (PRESET) on the unit or channel select backward button (CH-) or channel select
forward button (CH+) on the remote control one by one to select the preset number to select the preset number,
MEM will flash on the VFD display and will preset the number.
* PRESET To select cyclically one of the 16 preset number
* CH- Decreases the preset number by 1
* CH+ Increases the preset number by 1
4. Press the memory button (MEM) on the unit or memory button (MEMORY) on the remote control to store the
station. After 1 second, the VFD returns to the broadcast frequency display.
5. Repeat above steps 1 to 4 for each station you want to store to memory with a preset number.
Note: If the system is unplugged or if a power failure occurs, the preset stations will not be erased.
All manuals and user guides at all-guides.com
- 9 -
To change the FM reception mode
When you turn into a FM stereo broadcast, STEREO will be displayed on the VFD and you can hear stereo effects.
If FM stereo broadcast is hard to receive or noisy, you can select monaural mode. Reception improves, but you lose
any stereo effect. Press the stereo/mono select button (STEREO) on the unit or stereo/mono select button (ST/MO)
on the remote control so that the STEREO does not appeared on the VFD display.
To restore the stereo effect, press the stereo/mono select button (STEREO) on the unit or stereo/mono select button
(ST/MO) on the remote control so that STEREO will be displayed on the VFD display.
Function Menu Setting List
* You can make some permanent settings changes while the DVD is playing.
* If you want to set this units function, please press the function setting button (SETUP) on the remote control to
display the DVDs function setting main menu, then use the direction buttons ( , , , ) and confirm button
(ENTER) on the remote control .
Caution: The content of this charter is for reference only.
General Setup Page
TV Display
This menu allows the user to select the aspect ratio of the TV
to be connected.
Angle Mark
Available only when the disc is with angle marks, you can set
the angle mark to show on TV screen or not.
OSD Lang
This menu allows the user to select the language for the on-
screen.
Captions
Set the captions to display or close.
Screen Saver
Set the screen saver to activate or cancel.
Last Memory
Set the last memory state to on or off.
Audio Setup Page
Speaker Setup
l Downmix
When the disc has Dodly Pro Logic stereo, you can choose
LT/RT or Stereo or V.SURR mode to play this disc.
SPDIF Setup
l SPDIF Output
If close Optic or axis output, this system is only used for simu-
lation mode. If set for Mnaual, you can choose output mode
when playing different disc.
HDCD
When playing the HDCD disc, it can set the audio output
width degree.
All manuals and user guides at all-guides.com
- 10 -
Video Setup Page
Quality
You can according to the color of picture ,adjust it to be light
or dark.
Preference Page
Audio, Subtitle, Disc Menu
When disc has subtitle, audio, disc menu support. Playing
type was default. You can setup language. If not, this func-
tion is invalidated.
Parental
Setup this system when playing disc which had age control,
you can through this function.
Default
Restore to factory setting.
Password Setup Page
Password Mode
Select this item to set new password for this unit, follow the
screens indication and enter a password.
Password
The original password is 136900.
All manuals and user guides at all-guides.com
all-guides.com
- 11 -
Use the Discs
Caution: While the disc is playing, do not attempt to open the door by hand. Press the open/close button (K)
on the unit instead.
Normal playing
l
DVD Discs normal playing
1. Repeatly press the function select button (FUNCTION) on the unit or directly press the DVD function button
(DVD) on the remote control to select DVD function.
2. Press the open/close button (
K) on the unit to open the disc door and place the disc on the disc tray (with the
printed side up).
3. Press the open/close button (
K) again on the unit to close the disc door, the unit will read the disc and play it
automatically.
Note: In stop mode, please press the play/pause button (
BF ) to start play the disc.
4. When the menu is displayed on the TV screen, you can use the direction buttons (
, , , ) and confirm button
(ENTER) on the remote control to select the desired menu and start playing it.
Note: First press the direction buttons ( , , , ) to select the menu, then press confirm button (ENTER) to
enter the next menu.
5. Press the play/pause button (
BF ) to temporarily stop the playing and the picture will freeze on the TV screen,
press the button again, it will continue to play.
6. Press the stop/return button (
L/ ) to stop playing, the unit will store the last playing time in the memory
automatically, then press the play/pause button (BF ), the unit will resume to last memory time and continue
playback automatically.
If you press the stop/return button (
L/ ) twice to stop the disc playing.
7. TV mode select: When DVD function is selected, press the PAL/NTSC select button (N/P) on the remote control,
the TV Mode will change to NTSC or PAL to ensure normal playing.
Note:
* The disc's menu may not just be one layer, you can enter into every layer by repeatedly using step 4 above, untill
the program starts to play.
* The set will not play the disc, if ERROR REGION is displayed on the TV screen, indicating that this disc's
regional code number doesn't match this set.
l
General discs normal playing (Except for DVD disc)
1. Repeatly press the function select button (FUNCTION) on the unit or directly press the DVD function button
(DVD) on the remote control to select DVD function.
2. Press the open/close button (
K) on the unit to open the disc door and place the disc on the disc tray (with the
printed side up).
3. Press the open/close button (
K) again on the unit to close the disc door, the unit will read the disc and play it
automatically.
Note: In stop mode, please press the play/pause button (
BF ) to start playing the disc.
4. You can use channel function when you play the disc, you can choose MONO (Mono Left, Mono Right),
STEREO or Mix-Mono audio output by pressing vocal mode select button (AUDIO).
5. Press the play/pause button (
BF ) to temporarily stop the playing, press the button again, it will continue to
play.
6. Press the stop/return button (L/ ) to stop playing, this unit will store the last playing time in the memory
automatically, then press the play/pause button (
BF ), the unit will resume to last memory time and continue
playback automatically.
Press the stop/return button (L/ ) twice to stop the disc playing.
All manuals and user guides at all-guides.com
- 12 -
l
MP3 Discs normal playing
1. Place the MP3 disc on the disc tray properly, the unit will read the disc and the menu display on the TV screen.
2. Press the program button (PROGRAM) on the remote control to choose one of the following methods to select
a track playing.
* When the directory and track display on the TV screen, you can first press the direction buttons (
, , , ) on
the remote control to move the cursor to illuminate the track then press the confirm button (ENTER) on the
remote control to start playing it or press the number button (0/10,1-9) on the remote control to select the
desired track playing in this directory.
Note: If there is more than one layer directory, you may need to repeat use the direction button (
, , , )
and confirm button (ENTER) to select a track playing.
If there is more than one page directory or track, you can use the next button (
G) or previous
button (H) to select the next or previous page menu.
* When the track display on the TV screen, you can press the number button (0/10,1-9) on the remote control
to select the desired track in the disc then press the confirm button (ENTER) on the remote control to start
playing it.
Note: Play will continue until playing final track when the selected track have been played.
3. Press the stop/return button (
L/ ) to stop playing, this unit will remember last playing time inside memory
automatically, then press the play/pause button (BF ), this unit will resume to last memory time and continue
playback automatically.
If you press the stop/return button (
L/ ) twice to stop the disc playing.
Display the Playing Information
w While a general disc (except for DVD disc) is playing, repeatedly press the OSD button (OSD) on the remote
control, the TV screen shows the information as:
w When playing DVD disc, repeatedly press the OSD button (OSD) on the remote control, the TV screen shows the
information as:
Program playing
During programme play, 20 track can be stored maximum.
1. Place the disc on the disc tray properly.
2. In playing mode or stop mode, press the program button (PROGRAM) on the remote control to enter into the
program's edit mode, the program menu will be displayed on TV screen.
3. Press the number button (0/10,1-9,10+) on the remote control to input the sequence number you want to program
playing. (Note: If you are using a DVD disc, first one is title and second one is chapter into the program's
menu.)
4. After the programming is finished, Press the direction buttons (
, , , ) on the remote control to select START
then press the confirm button (ENTER) on the remote control to start programme playing.
5. Press the stop/return button (L/ ) twice to cancel the programme playing and to stop.
(When the program menu show on the TV screen, you can in order choose STOP and EXIT to exit the
programme playing and play will continue to the final track.)
Repeat playing
w You may repeat a track, by repeatedly press the repeat button (REPEAT), the screen shows orderly:
Single Elapsed Time Single Remain Time Total Elapsed Time Total Remain Time Display Off
Title Elapsed Time Title Remain Time Chapter Elapsed Time Chapter Remain Time Display Off
TRACK ALL Cancel Repeat
All manuals and user guides at all-guides.com
- 13 -
w When you are using a DVD disc, this function can be used to repeatedly play a title, chapter or disc. Repeatedly
press the repeat button (REPEAT), the screen will show the following:
w You can use this function to enjoy a certain part of a disc you like.
When it is playing, press the repeat A-B button (A-B) on the remote control at the beginning of the content that
needs repeat playing. Press the repeat A-B button (A-B) again at the end of the content that needs repeat playing.
Then the player will repeatedly play between A and B until you press the repeat A-B button (A-B) again to
cancel the repeat paragraph the setting and turn to normal playing mode.
Fast playing
When playing a disc, you may play it forward fast or reverse it fast to find what you need.
w Press the fast forward button (C) on the remote control once by once to select one of the different speeds to
fast forward or select normal speed to play. Each time you press the button, the screen shows as follows.
w Press the fast reverse button (
D) on the remote control repeatedly to select one of the different speeds to fast
backward play or select normal speed to play. Each time you press the button, the screen shows as follows.
Note: During fast playing (including forward and reverse), press the play/pause button (BF ) directly to resume
normal playing.
Skip select track
- Press the next button (G) once or more to skip to the beginning of the current chapter or previous chapter and
play it from the beginning.
- Press the previous button (
H) once or more to skip back one or more chapters of the disc and play it from the
beginning.
Search the playing time
You may directly enter a time, title or chapter number to search quickly on a disc. The unit will play from this point.
* This function is not available for Picture CD.
w DVD disc
Press the time search button (TIME) on the remote control to search a title in a disc or search a chapter in a title.
Press the number button (0/10,1-9) on the remote control to select the title number or chapter number.
Note: If the search time exceeds the total time on the disc or the item set falls short of the disc recorded, the
INPUT INVALID will display on TV screen, indicating the operation is invalid or incorrect.
w General disc (except for DVD disc)
Press the time search button (TIME) on the remote control to search a play point in a disc.
Press the number button (0/10,1-9) on the remote control to enter the time numbers to look for desired scene, the
left two-digit numbers is minute and the right two-digit numbers is second.
CHAPTER TITLE ALL Cancel Repeat
A AB
Cancel Repeat
2X 4X 8X 16X 32X
PLAY
2X 4X 8X 16X 32X PLAY
All manuals and user guides at all-guides.com
- 14 -
Zoom play and level move function
* NOT for CD and MP3 playback.
This function can be used to enjoy a motion or motionless picture.
1. Press the zoom button (ZOOM) on the remote control when playing, the screen shows the following:
2. Press the direction buttons ( , , , ) to move the enlarged picture.
3. To resume the picture, press the zoom button (ZOOM) until the screen shows ZOOM OFF.
Play picture CD disc
1. Place the picture CD disc on the disc tray properly, the unit will read the disc and the menu display on the TV
screen.
Picture CD: The disc is recording in picture
2. Press the program button (PROGRAM) on the remote control to choose one of the following methods to select
a picture playing.
* When the directory and picture display on the TV screen, you can first press the direction buttons (
, , , )
on the remote control to move the cursor to illuminate the picture (the picture will display on the TV screen)
then press the confirm button (ENTER) on the remote control to start playing it or press the number button
(0/10,1-9) on the remote control to select the desired picture playing in this directory.
Note: If there is more than one layer directory, you may need to repeat use the direction button (
, , , )
and confirm button (ENTER) to enter the picture normal playing.
If there is more than one page directory or picture, you can use the next button (
G) or previous
button (H) to select the next or previous page menu.
* When the picture display on the TV screen, you can press the number button (0/10,1-9) on the remote control
to select the desired picture in the disc then press the confirm button (ENTER) on the remote control to start
playing it.
Note: Play will continue until playing final picture when the selected picture have been played.
3. When playing, use the remote keys function to select different play mode. These play modes list as the following:
PROGRAM : Transition Effect
STOP (
L) : Thumbnail Mode
G : Next Picture
H : Previous Picture
PLAY (B) : Picture Mode
: Invert
: Mirror
: Contrarotate
: Rotate Clockwise
ZOOM : Switch Zoom Mode
C : Zoom In
D : Zoom Out
, , , : PAN IN Zoom Mode
Note: When playback the picture CD, press the stop/return button (L/ ) to enter the Thumbnail Mode, use
the direction buttons (
, , , ) to move the cursor to illuminate the MENU then press the confirm
button (ENTER) to enter the Remote Key Function list.
4. Press the root button (MENU) on the remote control to return to menu list screen.
5. When playing, you may need use the open/close button (
K) on the unit to stop playing and open the disc tray.
2X
3X 4X 1/2X 1/3X 1/4X B
All manuals and user guides at all-guides.com
- 15 -
Advanced Operations
Caution: The instruction of this chapter only suitable for DVD disc playing.
f TITLE
The images or music of a DVD are divided into separate units, among which title is the biggest one. For an image
in video-discs, title is movie; for a piece of music in audio discs, it is music.
Each title has a number that makes it easy to search.
f CHAPTER
It is smaller than title among the units of a DVD. A title is made up of several chapters, and each chapter has a
number for search, but some discs may not have numbered chapters.
Select menu
w In the disc's normal playing mode, press the title button (TITLE) on the remote control, the system will stop
playing and enter into the title menu's display mode, then you can use the direction buttons ( , , , ) and
confirm button (ENTER) on the remote control to select other tracks or title program.
w Some DVD disc's are recorded in more than one layer, if you press title button on the remote control in normal
playing mode, it will only return to the title menu, at this time, you may need to repeatedly use the direction
buttons (
, , , ) and confirm button (ENTER) on the remote control to enter into the normal playing. But if you
press the root button (MENU) on the remote control, it can only return to the previous layer's root menu, then you
can use the remote's direction buttons ( , , , ) and confirm button (ENTER) on the remote control to select the
playing track or title program or return to the previous layer's menu.
Select angle
You can use this function to watch a DVD disc which was shot from different angles, at different view angles. For
example: If a train is moving forward , you can display the train's front, left side window or right side window's
picture and not cut out the train going forward.
If the DVD disc you are playing was recorded in four angles, then you can repeatedly press the angle select button
(ANGLE) on the remote control to select one angle to watch.
Select subtitle
When you are playing a DVD disc that was recorded with several subtitles, you can repeatedly press the subtitle
button (SUBTITLE) on the remote control to select one of the subtitle languages to display on the TV screen.
For example: The disc was recorded in Chinese, Japanese, English three subtitles in order, it's order will change as
following:
Note: If the disc was recorded in Chinese, Japanese, English three subtitles and no subtitle function in order, then
it's order will change as following:
Select language
When you are playing a DVD disc recorded with several languages, you can repeatedly press the language select
button (AUDIO) to select one of these languages to play.
For example: The disc recorded Chinese, English, Japanese three languages, its order will change as following:
Angle 1 Angle 2 Angle 3 Angle 4
Chinese Japanese English
Chinese Japanese English No subtitle
Chinese English Japanese
All manuals and user guides at all-guides.com
all-guides.com
- 16 -
Setting the Clock
The built-in clock shows the correct time in the display.
1. Press the clock button (CLOCK ) twice on the remote control, the hour indicator will blink.
2. Set the hour by tuning backward button (TU-) or tuning forward button (TU+).
3. Press the clock button (CLOCK) on the remote control, the minute indicator will blink.
4. Set the minute by tuning backward button (TU-) or tuning forward button (TU+).
5. Press the clock button (CLOCK) on the remote control, the built-in clock starts operating and the seconds start
counting from 0.
Note:
* You can set the clock in standby mode.
* The operating time of every step shouldn't be longer than 3 seconds or it will return to the original display.
* If there is a power failure or the power system is turned off, the clock loses its setting.
* When DVD function is selected, please do not use the remote control to set the clock, otherwise, the DVD will
fast forward or fast backward.
To confirm the clock time
If you press the clock button (CLOCK ) on the remote control, the clock time is displayed. Wait for a second until the
display returns to the original display.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes while it is playing. By setting the sleep
timer, you can fall asleep to music and know that your system will turn off by itself rather than play all night.
1. Play a disc or tune in to the desired station.
2. If you set the sleep timer first, each time you press the sleep button (SLEEP) on the remote control, it changes the
number of minutes shown on the VFD in this sequence:
If you change the sleep timer, each time you press the sleep button (SLEEP) on the remote control, it changes the
number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as before setting the
sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When the sleep button (SLEEP) on the remote control, the remaining sleep time is displayed. Wait for a second until
the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (SLEEP) on the remote control until the 00 displays on the VFD.
Resetting the clock or turning off the system also cancels the sleep timer.
- -
10 20
...
80 90 00
- -
15 10 20
...
80 90 00
All manuals and user guides at all-guides.com
- 17 -
Setting the Daily Timer
You can use the setting timer to switch the unit on automatically at a certain time everyday unless there has been a
power failure. When the setting timer is on effect, the timer indicator will be displayed on the VFD. The clock must
be correctly set for the timer.
1. In standby mode, press the timer button (SLEEP) twice on the remote control, hour indicator will blink.
2. Set the hour with the tuning backward button (TU-) or tuning forward button (TU+).
3. Press the timer button (SLEEP) on the remote control, minute indicator will blink.
4. Set the minutes with the tuning backward button (TU-) or tuning forward button (TU+).
5. Press the timer button (SLEEP) on the remote control, the selected time is set. Then set the daily timer to ON
(daily timer set is in effect) or OFF (daily timer set is to cancel) by pressing the tuning backward button (TU-)
or tuning forward button (TU+).
Note:
* You can set the daily timer only in standby mode.
* The operating time of every step shouldn't longer than 3 seconds or it will return to time display.
* The sound source on the automatic opening mode is the same as the sound source the last time, the unit will
switch on in the selected mode before it was switched off.
To confirm the daily time
If you press the timer button (SLEEP) on the remote control in standby mode, the daily time is displayed. Wait for a
second until the display returns to the time display.
To cancel the daily timer setting
In standby mode, repeatedly press the timer button (SLEEP) on the remote control until the ON will display on the
VFD, then you can set the daily timer to OFF by pressing the tuning backward button (TU-) or tuning forward
button (TU+) (the daily timer will be cancelled).
Turning off the system also cancels the daily timer.
Protect the Disc
1. To keep the disc clean, please don't touch the disc's surface when you are holding it. You should holding it by the
edge.
2. If the disc is dirty, it will affect the sound quality. Please use a clean and soft cloth to wipe the disc from the inside
to the outside. Don't wipe the disc in a circumference direction.
3. Dont stick paper on the disc.
4. Dont place the disc in direct sunshine or hot sources.
5. After the disc is played, please put it into a box and keep properly. Don't stack the disc's together.
6. Dont play the disc which has a flaw or deformation, in may cause damage to the unit.
7. If necessary, use soft cloth to dip some diluted neutral liquor and wipe the finger prints etc. blot. Don't use
recorder detergent or static proof liquor to clean the disc, also don't use gasoline or normal alcohol.
All manuals and user guides at all-guides.com
- 18 -
Symptom
No sound is heard
No picture
Bad sound quality
Picture roll or without color
The disc does not play
Poor radio reception
Unable to operate
the remote control
Operations are disabled
Possible Cause
Connections are incorrect, or loose
TV or power amplifier operates incorrectly
The amplifiers receiving signal position is
wrong
Volume setting to minimum
Connections wrong or loose
TV Operation and setting is wrong
Audio connects wrong
DVD Player doesnt match the TV system
No disc in the tray
The disc is upside down
The disc is dirty or scratched
The unit is foggy inside
The antenna is disconnected
The AM loop antenna is too close to the system
The FM wire antenna is not properly extended
and positioned
The path between the remote control and the
sensor of the unit is blocked
The batteries have lost their charge
The built-in microprocessor has malfunctioned
due to external electrical interference
Action
Check all connections and make corrections
Check whether the operation is right
Check the position of receive signal
Adjust volume
Check all connections and correct it
Check whether operation and setting is right
Check whether audio connections are right
Use PAL/NTSC select button to select suit-
able system
Place a disc
Place the disc with the printed side up
Clean or replace the disc
Take out the disc, turn on the unit for about
an hour
Reconnect the antenna securely
Change the position and direction of the AM
loop Antenna
Extend FM wire antenna to the best recep-
tion position
Remove the obstruction
Replace the batteries
Unplug the system then plug it back in
Troubleshooting
If you are having a problem with your system, check this list for a possible solution before calling for service.
If you can not solve the problem from the hints given here, or the system has been physically damaged, call a
qualified person, such as your dealer, for service.
All manuals and user guides at all-guides.com
- 19 -
Specification
System
Power supply ....................................................................... ~240V / 50 Hz
Rated working power consumption .................................... ≤ 100W
AUX input sensitivity .......................................................... ≤ 350mV
Channel ................................................................................≥ 40dB
Distortion ............................................................................. 0.7%
DVD
Frequency response ............................................................. 20Hz-20kHz (±3dB)
Video output ........................................................................1 V
P-P
Super Bass Audio output .....................................................1.5V (100Hz)
Horizontal definition ........................................................... ≥ 500 (TV)
Dimensions ..........................................................................192(W) x 71(H) x 228.5(D) mm
Amplifier
Rated output power (distortion = 10%) ............................... 25W x 2 (8Ω 1kHz)
Distortion restrict output power (distortion = 0.7%) .........15W x 2 (8Ω 1kHz)
Frequency response ............................................................. 20Hz-20kHz (+1/-3dB)
S/N Ratio ............................................................................. ≥ 60dB
Loaded impedance ............................................................... 8Ω
Dimensions ..........................................................................192(W) x 64.5(H) x 233(D) mm
FM
FM Frequency range ........................................................... 87.5-108 MHz
FM Noise limit sensitivity ................................................... ≤ 20µV
FM S/N ................................................................................≥ 46dB
AM Frequency range ...........................................................531-1602 kHz
AM Noise limit sensitivity .................................................. ≤ 3.0µV/m
AM S/N ............................................................................... ≥ 40dB
Speaker
Impedance ............................................................................ 8Ω
Input power ......................................................................... 30W
Sensitivity ............................................................................ 80 ± 4dB
Frequency response ............................................................. 80Hz-16kHz
Dimensions ..........................................................................130(W) x 155(H) x 210(D) mm
Remote
Distance ............................................................................... 6m
Angle ................................................................................... ± 30
O
All manuals and user guides at all-guides.com
Page is loading ...
Page is loading ...
/