American Standard 2932 Dimensions Guide

American Standard
Brand
American Standard
Model
2932
Category
Sanitary ware
Type
Dimensions Guide

This manual is also suitable for

H167
© 2014 AS America Inc.
STUDIO
®
5' x 36" Bathing Pool
•Minimalistdesignwithcontouredlumbarsupport
•Acrylicwithberglassreinforcement
•Pre-leveledtubbottom
•Drop-inorunder-mountinstallation
•CanbeushmountedwithZero-Edge
™
prolemodel
•Integraltileangemodelsforalcoveinstallation
❏ 2934.002-D2 2"prole
❏ 2934.002-D4 4"prole
❏ 2934.002-D0 Zero-Edge
™
prole
❏ 2935.102 Integraltileange,righthanddrain
❏ 2935.202 Integraltileange,lefthanddrain
Nominal Dimensions:
60"x36"x22-1/2"
(1524x914x572mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
•ANSIZ124.1forPlasticBathtubs
•ASTME162forFlammability
•NFPA258forSmokeDensity
STUDIO
®
5' x 36"
BATHING POOL
HIGH GLOSS ACRYLIC
SEEREVERSESIDEFORROUGHING-INDIMENSIONS
ANDPRODUCTSPECIFICATIONS
Forcolor/nishavailabilityandotherfaucetchoices,
pleaseseewww.americanstandard.com
To Be Specied - Required:
❏Color:
❏BathFiller:(specifynish)
❏BathDrain:(specifynish)
❏Recommended:1640.305DeepSoak
®
drainor
1583.470Universaldrain
To Be Specied - Optional:
❏ In-LineSafe-T-Heater:9075.120
H168
© 2014 AS America Inc.
STUDIO
®
5' x 36"
BATHING POOL
HIGH GLOSS ACRYLIC
NOTES:
BATHCANBEINSTALLEDEITHERABOVEORBELOWFLOORLINEASPIER,ISLAND,ORPENINSULATYPEINSTALLATION.SUMPOFBATHIS
SUPPORTEDBYINTEGRALFEET.NOADDITIONALSUPPORTREQUIRED.ENCLOSINGMATERIALBYOTHERS.
REFERTOINSTALLATIONINSTRUCTIONSSUPPLIEDFORADDITIONALINFORMATION.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
PROVIDESUITABLEREINFORCEMENTFORALLSUPPORTS.
IFINSTALLINGADECK-MOUNTEDFITTING,BEFOREDRILLINGANYHOLES:CHECKFORINTERFERENCEWITHCIRCULATINGSYSTEMPIPING,
DRAINOVERFLOW,ANDAPRONINSTALLATION.MOUNTINGHOLESDRILLEDBYINSTALLER.
IMPORTANT:DimensionsofxturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardZ124.1.Thesemeasurements
aresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.
60" NOMINAL
(1524mm)
36" NOMINAL
(914mm)
C/L DRAIN
OUTLINE OF
CUTOUT
9" x 15"
(229 x 305mm)
DRAIN ASS’Y
FLOOR CUTOUT
OVERFLOW
PROVIDE ACCESS
TO PUMP
SERVING ON
ALL INSTALLATIONS
GENERAL SPECIFICATIONS FOR 2934 SERIES BATHING POOL
60 x 36 x 22-1/2 In. (1524 x 914 x 572mm)
95 Lbs. (43 Kg.)
686 Lbs. (311 Kg.)
71 Gal. (269 L)
17-3/4 In. (451mm)
46 Lbs./Sq.Ft. (223 Kgs./Sq.m)
13.58
31.5
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
MODEL SERIES 2934
  • Page 1 1
  • Page 2 2

American Standard 2932 Dimensions Guide

American Standard
Brand
American Standard
Model
2932
Category
Sanitary ware
Type
Dimensions Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents