Please read this manual
carefully before use.
Retain it for future reference.
Warranty Card inside.
OPERATING MANUAL
Inspir ed living
Twin-Tub Washing Machine
HWM 75-AS
HWM 80-AS
HWM 100-AS-BS
QA Passed
QA
Passed
service@haier.com.pk www.haier.com.pk
HNR Company (Pvt) Ltd.
Head Office : 63/B, Mega Tower Main Buleward, Gulberg-III, Lahore.
UAN: 11 11 HAIER (42437) Tel: 042 - 35879105 - 7
UAN: 11 11 HAIER (42437)
service@haier.com.pk
www.haier.com.pk
SIALKOT
Al-Hadi Town, Defence Road,
Pakka Peyya Stop,
Opp. Mehar CNG,
Tel: 052-3612011/3612279
GUJRANWALA
GMS Area Bismillah
Market, G.T Road
Opp. Gold Marriage Hall
Tel: 055-3847177/3843194
GUJRAT
Tariq Plaza Nr. Bandan
Marriage Hall,
Rahman Shaheed Road
Tel: 053-2107114/3537928/9
HYDERABAD
Banglow No.342/A
Block # 6,
Latif abad # 6,
Tel: 022-3862792,2900265
JHELUM
Major Nawaz Shaheed
Colony, Mehdi
Shaheed Road
Tel: 054-4620250,627231
D.G KHAN
House # 4, Block No. 17,
Street No. 4,
Laghari Colony
Tel: 064-2466483
BAHAWALPUR
H.No.44/278 Central
Jail Road, Arif Town
Tel: 062-3101460,2883015
SAHIWAL
66/E Scheme # 2 Near
Cakes & Bakes, College
Chowk, Farid Town.
Tel: 040-4271600-02
SUKKUR
Banglow No.C473/2
Queens Road
Tel: 071-5621462-63
RAWALPINDI
951 - B, near kali tanki,
Opp. MC girls high
school, Satellite town,
Tel: 051-4582410,4451585
KARACHI
C-16 Block#.5
Rashid Minhas Road
Nr. NIPA Chorangi
Tel: 021-4817834-7
KARACHI (2)
C-21,Sector 31 E
Lakhnow Co operative
Housing Society Korangi
Road, Near Nasir Jump
Tel: 021-5060512,5060656
SARGODHA
67 A Shahzad Park
P.A.F Road
Tel: 0483-741526-8
QUETTA
Banglow # 4-29/1
Mir Ahmed Khan Road
Tel: 081-2838508,2821179
LAHORE (2)
62-2-C-2
Town Ship
Tel: 042-5117863,5122333
LAHORE
92-B, Sharif Colony,
Iftikhar Ahmed
Malik Road
Tel: 042-5879105-7
FAISALABAD
36 / 8 New Civil Lines
Behind State bank of
Pakistan
Tel: 041-2620876-7
MULTAN
178-A Shamsabad,
Eidgah Road,
Tel: 061-4577406
PESHAWAR
Haier Plaza
G.T Road
Nr. Haji Camp
Tel: 091-2262910
Service Centres
Contents
Name of the parts
Safety precautions
Installation and adjustment
Preparation before washing
The musts in washing
Usage of the detergent
Washing sequence
Disposal after washing
Trouble-Shooting *Answer to question
Packing list
Specification
1
2
5
7
8
9
10
13
18
21
21
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Ventilation hole at the
bottom of the washing
machine
If the power cord is bad, to avoid risk
it is required to replace it by the
technicians of our special shop or the
after-sale service department. Keep
the pin of the Power Plug clean.
When the machine is normally using,
please put the power plug at the location
easily to be inserted and extracted by
hand. Be sure to pull the plug off when
there's power failure, or the machine is
being moved, cleaned or when it is idle.
Do not use water hotter than 50 C
O
Control panel
Wash Selector
Overflow filter
Wash tub
Base frame
Outer cover of
the spin tub
Inner cover of
the spin tub
Spin timer
Major frame
Spin tub
Cabinet
Power cord
Wash timer
Water level
adjusting lever
Drain hose
Contents marked with that symbol are related to the safety of the
product and the personal safety of the users. Please operate in strict
conformity to the contents. Otherwise it may cause damage of the
machine or injure the personal safety of the user.
Contents marked with that symbol are action forbidden to perform.
Performing of those action may result in damage of the machine or
influence the personal safety of the users.
Meaning and Description of the Symbols
Forbidding sign
Warning sign
Protecting cover
Valve cover
Pulsator
Wash tub cover
Note: All illustrations in this manual are given for reference only. Your products and
accessories may show differences from these illustrations due to our
continuous improvement.
Please check if the power receptacle has good earthing condition before using to
guarantee your safety.
Water Inlet
Selector
1 2
Before Using
Name of Parts
Before Using
Safety Precautions
O
Do not share one receptacle with other
electric appliances. Do no use it in case
that the power plug is damaged or the
inserting into the receptacle is loos.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not place wet laundries on the control
panel.
á`äЬå¢BT~á
`ã°z;VåZgB»ñ@*Z¼u
áu»Z0+6:gìXZgBÆa0*U$c*0*ã»
0*U$CÙ¦/ZEw:,X
Be sure to earth the earthing wire
reliably. Do not connect the earth
terminal to the gas pipe and tap water
pipe.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of the
children.
Do not decompose, repair or alter the
machine by your self.
Do not put any hot or heavy items (such
as the kettle with hot water) on the
washing machine.
Do not wash laundries with volatile
material (such as thinner, petrol etc.)
P
t
e
ro
l
T
h
i
n
e
r
n
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent your laundries and washing
machine from damage, be sure to take
out all of the foreign materials from your
pocket, such as coins, button, sand or
hair pins etc.
Before washing, please check if the water tap is open,
and if the water inlet pipe is connected properly. It is
suggested to use low-foaming washing powder. Please
don't use washer in the environment below 0 C. If you do
than water will be frozen in the inlet & draining system. If
the below 0 C, please be sure to ensure the water is
placed under the room temperature for 2 ~ 4 hours and
then use.
O
O
3 4
Before Using
Safety Precautions
Do not wash water-proof laundries such
as the raincoat, bicycle shelter etc. To
avoid abnormal vibration during
spinning.
Please install and adjust the machine
according to the requirement of the
manual. It is very important to your
security and correct operating the
machine.
After opening the package, please
take out the lint filter from the
document bag, install it to the
overflow filter of the wash tub. See
to the figure.
Install the lint filter
Install the water inlet hose;
Select the water level
Insert the water inlet hose into the
water-filling entrance on the control
panel directly. (pull it out to dismantle
it)
Select water level according to the
quantity of the laundries.
Set the water level adjusting level to
needed line.
Before Using
Installation and adjustment
O
5 6
Before Using
Installation and adjustment
Usage of the drain hose
4.
If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not less
than 30mm, and the length shall not
exceed 1.5m.
-4
If extra drain hose is too long, cut it either
at point A or B.
5.
-5
The drainage shall be smooth with
the drain hose.
1.
The height of the drain hose shall be less
than 10cm, or the drainage will not be
smooth enough and cause incomplete
drainage.
2.
Do not tramp on or press the drain house.
-1
-2
3.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
-3
How to Change the direction
of the drain hose
Figure 1 indicates the ex-factory installation
position of the drain hose.
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove. (See to
Figure 2).
Embed the drain hose into the groove along the
side of the spin tub in the order of (1)~(3),
heading for the side of the spin tub. (See to
Figure 3).
Extend the drain hose from the side of spin tub
1.
-1
2.
-2
-3
3.
Embed the drain hose into the groove with
hands. Take care not to damage the drain hose
in fastening the fixing clamp.
4.
4.
Before Using
Installation and adjustment
7 8
The musts in washing
Using Process
Preparation before washing
Using Process
Connect the water inlet
hose.
Confirm that the washing
machine is earthed reliably.
Than insert the power plug
into the receptacle. Do not
connect the earth terminal to
the gas pipe and tap water
pipe.
Put down the drain hose.
Slanting or uneven ground
may result in unsatiable
working or abnormal noise.
Please make the machine
stand horizontally.
1.
2.
3.
4.
Preparation before washing
Pay attention to followings before washing the laundries
Confirm if
there's special
requirement for
the laundries.
Clear the
pocket. Take
out the coins,
sand, hairpins
etc.
Fasten the
button and
zippers.
The quantity of
the laundries
shall not
exceed the
rated value.
The big
laundries like
the jeans shall
be put in
loosely.
When the
pulsator is
running, the
buttons of the
laundries may
cause noise.
For the sake of
discretion,
please put the
laundries with
buttons into
other laundries.
-1
-2
-3
-4
The capacity of washing and spinning of the machine
refer to the largest weight of the standard laundries
under dry condition that can be washed or spinned in
one time. Laundries quantity in one washing cycle
shall be lower than the rated capacity. The largest
capacity of this machine is given page #.
The thickness, size, type of the cloth will influence the
actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries can
be turned round in washing for on time washing.
Do not select "Maximum" water level for laundries less
than 2-3kg, so as to avoid splashing of water.
Reference weight of the laundries
Working suit (up, down)
(cotton, about 1120g)
Blanket
(cotton, about 900g)
Pajamas
(about 200g)
Shirt
(cotton, about
300g)
Undershirt
(cotton, about
180g)
Underpants
(cotton, about 70g)
Socking
(blending, about 50g)
Jacket
(cotton, about 800g)
Blending coat
about 800g
Jeans (about 800g)
Single bed sheet
(cotton, about 600g)
20
9 10
Using Process
Usage of the detergent
Fill water to decided level. Dilute the whitener with container. Pour it slowly into the
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before using.
How to use the whitener
How to use the washing powder
-1
-2
-3
-1
-2
Direct dissolved in the machine:
1. Fill small quantity of water.
2. Add the powder. Run for 30 seconds to dissolve it completely.
3. Put it in the laundries. Select suitable water level.
The instant dissolving of the washing powder:
1. Prepare warm water of 30 C and a container.
2. Add the powder while stirring to fully dissolve it.
The powder is more prone to pollute the laundries than the detergent. Therefore
please use it with proper quantity.
It is suggested not to use high sudsing detergent.
Dosage of different washing powder is different. Please refer to the instruction of
the washing powder for the detail dosage.
O
Wash
1.
2.
3.
4.
5.
Fill the water and add the dissolved
washing powder to make the water level
reach the preset position. (Figure 2)
Run washing program for some time to
stir and dissolve the powder completely.
Put in the laundries. If the water quantity
is insufficient, please add water.
Select the current
Select the strength of the current
according to the laundries. (Figure 3)
Select the washing time
Select the washing time according to the
laundries. (Figure 4)
After washing, the buzzer will ring. Set
the "WASH SELECTOR" at "DRAIN".
(Figure5)
-1
-2
-3
-4
-5
Spin timer
Wash timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer)
SPIN TIMER
WASH TIMER
WASH SELECTOR
Wash selector
standard current)
(Strong current)
12
15
3
6
9
OFF
DRAIN
STANDARD
STRONG
4
5
1
2
3
OFF
Water Inlet Selector
SPIN
Figure 1
Figure 2
WASH SELECTOR
DRAIN
STANDARD
STRONG
Figure 4
WASH SELECTOR
DRAIN
STRONG
Figure 3
12
15
3
6
9
OFF
WASH TIMER
6
Using Process
Washing sequence
8-10
13-10
7-13
2-4
3-6
Cotton, Blending, Linen
Very dirty and thick
Bed sheet
Silk (thin laundries)
Chemical fiber Knitwear
Laundries
Washing time Current
Standard
Strong
4
11 12
Using Process
Washing sequence
1. Put the laundries into the spin
tub evenly and smoothly.
2. Spin :
(1) Put the gland in properly.
Please put in the gland properly
even if the laundries quantity is
small.
(2) Close the inner and outer cover of the
spin tub.
(3) Spin for 1-2 minutes.
Midway spinning
-1
-2
(i)
(ii)
(iii)
WASH
SPIN
Outer cover of
The spin tub
Inner cover of
The spin tub
Push
Push
Proper Proper
The laundries
are slanting
Gland
No gland
3. Run the foam-removing spinning.
Set the water-filling selector control
rad at the "SPIN" side. Fill water for
about 1 minute.
If the water quantity filled is to large,
the water may flow out from the wash
tub side. Please twist the water tap to
limit the water filling.
Close the outer cover of the spin tub.
Spin for 1-2 minutes.
-3
(1)
(2)
(1)
(2)
WASH
SPIN
Using Process
Washing sequence
2.
3.
Fill water to preset water level.
Rinse
Adjust the wash timer to 2-3 minutes to do
rinsing.
When the laundries quantity is below 2-3kg,
please us "STANDARD" current. If you use
"STRONG" current, it may splash.
3.
Rinsing
Rinse with water-filling
1.
2.
3.
Put the laundries into the wash tub. Select
suitable current according to the laundries.
Adjust the water level
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
Rinse
Adjust the wash timer to 2-3 minutes to do
rinsing.
(Repeat the midway spinning and
rinsing with stored water for 2-3 times)
2.
3.
Rinse with stored water
1.
Put the laundries into the wash tub. Select
suitable current according to the laundries.
1.
2.
13 14
Using Process
Disposal after washing
Spinning
1.
2.
3.
Put the laundries into the spin tub
evenly and smoothly.
Press the gland in the tub properly.
Close the inner and outer cover of the
spin tub.
Spin
Select suitable spin time according to
the laundries, and do spinning.
During spinning, if there's abnormal
sound, it is generally owing to slanting
placement of the laundries. Please stop
the machine and re-order the laundries.
In spinning, it will pause the work if you
open the outer cover of the spin tub.
Close it to resume the spinning.
Selection of the Spin time list 3.
-1
-2
-3
To do spinning and draining or
rins i ng w ith w ater - fill i ng
together, please first do spinning
for around 1 minute, then do
draining or rinsing with water-
filling. Otherwise the spinning
will stop owing to too much water
stored in the spin tub.
Note:
Laundries
bed sheet or
blanket
Underwear
(knitwear)
Swear
(chemical fiber)
Blending thin
laundries
Spin time
(minutes)
About 4~5
About 2~4
About 1~2
Within 1
minutes
Using Process
Washing sequence
Cleaning the frame filter
Too much lint on the overflow filter
will influence the normal usage of the
machine. Please clean it every two
months.
Take off the overflow filter
As indicated in the figure, nip the
elastic fixing claw and pull it to the
direction of the arrow to take it off.
Take off the corrugation pipe.
Dismantle the upper inside the
overflow filter (as indicated in
Figure1).
Clean the overflow filter
Clean the lint around the filter and
flush with tap water.
Install the overflow filter
(1) Install the corrugation pipe.
(2) Insert the mounting plate at the
bottom of the filter into original
position.
(3) Hang up the hook at the left upper
side.
(4) Push the upper part in as
indicated in Figure2.)
1.
2.
3.
4.
-1
-2
-3
Hook
Figure 2
Water
1
Pipe
Figure
level
adjusting lever
Elastic fixing
claw
-4
(4)
15 16
-1
-3
Cleaning the lint filter
The lint filter must be used during
washing.
It must be cleaned in time after each
using.
Take off the lint filter
Put hand at the indicated position.
Push down to take it off.
(See to Figure 1)
Clean the lint
Put it in water and clean while it is still
wet. (See to Figure 2)
Install the lint filter
After cleaning, insert the bottom of
the lint after filter (marked with
"DOWN SIDE") into the filter frame,
then push the upper part of the filter
i n ( m a r k e d w i t h
"UP SIDE").(See Figure 3)
1.
2.
3.
Figure 2
Figure 3
Figure 1
Using Process
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter and lint frame in
time. Otherwise it may influence your using the machine.
Please first pull the power plug from the receptacle before cleaning.
-2
Clean the safeguard cover
The safeguard cover must be used
during washing.
The surface must be cleaned every
time after washing.
The underside of the cover must be
cleaned every period of time.
Take off the safeguard cover
Use the thumb to fasten the indicated
groove then take it out as the direction
of the figure.
Clean the underside of the cover
Use the nipper or other spindly clamps
to take out the lint, sundries etc.
Install the safeguard cover
After finish cleaning, fasten the
safeguard cover to the tub bottom,
infirm the claw install correctly and
hard to fail off.
1.
2.
3.
-1
-2
-3
Groove
Using Process
Disposal after washing
Spin tub frame
17 18
After washing, dismount the water
inlet hose.
Do not store water in the tub for long
p e r i o d . D i s c h a r g e t h e
water immediately after each
using.
Pull of the power plug and hang up
the power cord.
Hang up the drain hose.
Wipe off the water drops on the
surface and inside the tub with clean
soft cloth.
Open the cover of the wash for some
time (about one hour), then
close them.
Wipe the complete unit with soft
cloth twisted dry.
Wipe with neutral detergent if too
dirty.
Do not wash it directly by water.
Do no wipe with thinner, petrol,
alcohol, etc.
Thinner
Alcohol
Petrol
Disposal of the complete unit
1.
2.
3.
4.
5.
6.
7.
8.
9.
-1
-2
-3
-4
-5
-6
-7
-8
-9
10.
-10
If the laundries fall to the out side of the spin tub
If the laundries fal to the outer side of the spin tub, please take them out immediately.
1. Dismantle
As indicated in the figure, push the point marked with to pull the spin tub frame to oblique upwards to
dismantle it.
2. Install
After install the back edge of the spin tub frame to proper position, push the four points marked with "
" by force to reset it.
Please check carefully. The laundries may fall to the lower part of the outer side of the spin tub (as
indicated in the figure.)
If the laundries fall to the outer side of the spin tub, during spinning the draining will get blocked
and the rotation speed of the spin tub is reduced.
Spin tub
Laundries
Using Process
Trouble-shooting (Answers to questions)
Using Process
Disposal after washing
Below 50 C
2-3L
O
Prevent the freezing
(Be sure to discharge the water completely after using)
After complete draining, set the "WASH SELECTOR" at "SOFT" or "STANDARD". If it is set an
"DRAIN", it will be rather difficult for the frozen water to melt.
When the water is frozen
Pour hot water below 50 C into the wash to soak it completely, Then turn the pulsator with hands
gently.
Please confirm the can work normally before next using.
When the remained water is frozen
O
19 20
Using Process
Trouble-shooting (Answers to questions)
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before
sending it to repair. If there are real breakdowns, please com to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.
Phenomena The reason
The machine does not act.
Is there power failure?
Is the power plug loose?
Is the pulsator twisted by foreign materials?
There's abnormal sound
during washing.
Are there hair pin, coins or metal items brought
inside the tub?
The drainage does not work
Is the drain hose put down?
Is the drain hose frozen?
Is the drain hose blocked by
foreign material?
Are there laundries falling
to the outer side of the spin tub?
Is the machine slanting?
Is the gland pressed evenly?
It is the water remained in the factory inspection
of performance.
There may be some water
flowing out of the drain hose in
the first use of the machine.
There's abnormal sound
and violent vibration during
spinning.
Are there laundries falling to the outer side
of spin tub?
Are the laundries in spin tub too much?
Technical Information
Packing list
User's manual
Water inlet hose
Water-filling jointer
Gland
Twin-tub Washing machine
One piece
One piece
One piece
One piece
One set
NameQuantity
Specification
Description
Power Source
Rated in put power (washing)
Rated in Put power (spining)
Water level/water level(bout)
Injection Pressure (Mpa)
Washing Capacity (Kg)
Spinning Capacity (Kg)
Size (mm)
Weight
HWM75-AS HWM80-AS
HWM100-AS/BS
220V 220V 220V
335W 370W 375W
135W 150W 150W
0.02~0.2 0.02~0.2 0.02~0.2
7.5 8 10
4.5 4.5 6
L735W425H850 L735W425H905 L760W450H947
18.5Kg 20Kg 20Kg
Max-48
Med-39
Min-33
Max-48
Med-39
Min-33
Max-58
Med-49
Min-43
BAHWAL NAGER
Rana Air Conditioning
Tel: 73107
HARI PUR
Fresh Cool Engg.
Tel: 0300-5381833
LAYYAH
Shoaib Cooling
Tel: 412638
NAROWAL
Nadeem Refrigeration
Tel: 412865
BADEEN
Zeeshan Refrigeration
Quaid-e-Azam Road
Mob: 0333-2520620
HAROONABAD
New Republic Refrigeration
Tel: 51035
MARDAN
Shahid Ref.
Tel: 0300-5726712
OKARA
New Ittefaq Cooling
Tel: 512672
CHISHTIAN
Azad Cooling Center
Tel: 500343
JHANG
New Sharja Ref.
Tel: 6000634
M. B DIN
New Khan Fridge
Tel: 500996
PAKPATAN
Zam Zam Cooling Center
Tel: 0443-73296
CHECHAWATNI
Irfan Cooling
Tel: 485379
KHARIAN
Malik Fridge
Tel: 532504
MIRPUR A.K
City Cool Center
Tel: 43675
RAWALAKOT
Baba Refrigeration
Tel: 46176
D.I. KHAN
City Air Service
Tel: 714070
KHANEWAL
Nadeem Engineering
Tel: 2552432
MIANWALI
Al-Faran Refrigeration
Tel: 233748
SHADARA
Cool Breeze
Tel: 0333-4403259
DINA
Humza Fridge Service
Tel: 634858
KOHAT
Tayyab Electronics
Tel: 522720
MIAN CHANNU
Mangia Cooling
Tel: 662688
SHEIKHUPURA
Mehboob Cooling
Tel: 51932
FATHYPUR
Naseer Cooling
Tel: 840818
KASUR
Anwar Cooling Center
Tel: 762762
MIRPUR KHAS
Cool Master Refrigeration
Tel: 61751
SHAKARGHAR
Iqbal Refrigeration
Tel: 452204
GUJAR KHAN
Top Cool Enterprises
Tel: 512212
KAND KOT
Bajaj Ref.
Tel: 572580
MORO
Danish Refrigeration
Tel: 41837
VEHARI
Top Cool Center
Tel: 3361979
GHOTHI
Qadri Refrigeration
Tel: 81839
LARKANA
Sindh Refrigeration
Tel: 443648
NANKANA
Sajjad Electronics
Tel: 0300-4689305
BAHAWALPUR
H.No.44/278 Central
Jail Road, Arif Town
Tel: 062-3101460,2883015
LAHORE
92-B, Sharif Colony,
Iftikhar Ahmed
Malik Road
Tel: 042-5879105-7
SIALKOT
Mohala Hamza Ghos,
Main Pasrur Road
Nr. Waseem Electronics
Tel: 052-3612011/3612279
FAISALABAD
36 / 8 New Civil Lines
Behind State bank of
Pakistan
Tel: 041-2620876-7
MULTAN
178-A Shamsabad,
Eidgah Road,
Tel: 061-4577406
SAHIWAL
66/E Scheme # 2 Near
Cakes & Bakes College
Chowk, Farid Town.
Cell # 0322-6909687
0300-9698236
GUJRANWALA
GMS Area Bismillah
Market, G.T Road
Opp. Gold Marriage Hall
Tel: 055-3847177/3843194
PESHAWAR
Haier Plaza
G.T Road
Nr. Haji Camp
Tel: 091-2262910
GUJRAT
Tariq Plaza Nr. Bandan
Marriage Hall,
Rahman Shaheed Road
Tel: 053-2107114/3537928/9
QUETTA
Banglow # 4-36/14
Mir Ahmed Khan Road
Tel: 081-2838508
SUKKUR
Banglow No.C473/2
Queens Road
Tel: 071-5621462-63
HYDERABAD
Banglow No.112-C
Block # D Unit#.07
Latif abad
Near Faroqia Masjid,
Tel: 022-3862792
2900265
RAWALPINDI
951 B, near kali tanki,
Opp. MC girls high
school, Satellite town,
Tel: 051-4312120
JHELUM
Major Nawaz Shaheed
Colony, Mehdi
Shaheed Road
Tel: 054-4620250,
KARACHI,(1)
C-16 Block#.5
Rashid Minhas Road
Nr.NIPA Chorangi
Tel: 021-4817834-7
SARGODHA
67 A Shahzad Park
P.A.F Road
Tel: 0483-741526-8
0483009867
D.G KHAN
Block No. 18,
Street No. 4,
Laghari Colony
Tel: 064-2466483
201745
LAHORE(2)
62-2-C-2
Town Ship
042-5117863
KARACHI.(2)
C-21,Sector 31 E
Lakhnow Co operative
Housing Society Korangi
Road Near Nasir Jump
Tel:021-5060512,5060656
Service Centres
Authorized Service Centres
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Palsonic PAL800TT Owner's manual
-
-
Lemair LWTT80 User manual
-
Candy RTT 2151WSZ-19 User manual
-
Alfa 40-MS User manual
-
LG WP-1021S.ALGDOMT Owner's manual
-
Samsung WA75K2 User manual
-
HWM RCA7922L Operating instructions
-
Candy RTT 2101WSZ-19 User manual
-
Videocon VS60A13 Owner's manual