Panasonic TX32LX70P Operating instructions
- Category
- LCD TVs
- Type
- Operating instructions
This manual is also suitable for
TV
PROGRAMME
ASPECT
INPUT
RETURN
EXIT
MENU
OK
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
VCR DVD
TEXT F.P. INDEX HOLD
Operating Instructions
LCD Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Model No. TX-26LX70P
TX-32LX70P
2
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
3
Viewing Advanced FAQs, etc.Quick Start Guide
media excitement
Enjoy rich multi-media
Camcorder
Amplifi er with
Speaker system
VCR
DVD player
DVD Recorder
Personal
computer
Set top box
Contents
•
Safety Precautions ······································4
(Warning / Caution)
•
Notes ···························································5
•
Maintenance················································5
Be Sure to Read
Advanced Features
•
How to Use Menu Functions ·····················18
(picture, sound quality, etc.)
•
Editing and Setting Channels
······················ 22
•
Control Channel Audience ························24
•
Restore Settings ·······································25
•
Input Labels···············································26
•
Displaying PC Screen on TV ·····················27
•
Q-Link Functions ·······································28
•
HDMI Functions ······································· 29
(HDMI terminal / VIERA Link)
•
External Equipment ···································32
Basic Features
•
Watching TV ··············································12
•
Watching Videos and DVDs ······················ 14
•
Viewing Teletext ········································ 16
Enjoy your TV!
•
Technical Information ································34
•
FAQs ························································· 37
•
Licence ······················································39
•
Specifi cations ············································39
FAQs, etc.
Accessories / Options
·········· 6
Identifying Controls
··············· 7
Basic Connection
··················· 8
Auto Setup
······························· 10
Quick Start Guide
4
Safety Precautions
If you fi nd any
abnormality,
remove the mains plug
immediately!
Keep liquids away from the TV
To prevent damage which may result in fi re or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (fl ower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Do not place foreign objects
inside the TV
Do not let metal or fl ammable objects drop into the
TV through the air vents (fi re or electrical shock
may result).
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.)
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
Warning
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fi re never place any
type of candle or naked fl ame on top or near the TV.
Use only the dedicated stands
/ mounting equipment
Using an unauthorized stand or other fi xtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
AC 220-240 V
50 / 60 Hz
5
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the
mains plug
Caution
Blocked ventilation by curtains,
etc. may cause overheating, fi re
or electrical shock.
Do not block the rear air vents
Notes
Maintenance
Display panel
Cabinet
Mains plug
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.
•
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Adjust the LCD panel to your desired
angle
15° 15°
(View from the top)
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.
Auto power standby function
Transport only in upright position
Allow suffi cient space around the
TV for radiated heat
10
10
10
10
(cm)
TV Stand
Minimum distance
6
TV
OK
132
465
798
0
+
-
-
+
Optional accessories
Wall-hanging
bracket
TY-WK32LR2W
WARNING!
•
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer
mount your unit will void your warranty.
•
Always be sure to ask a qualifi ed technician to carry out set-up.
Incorrect fi tting may cause equipment to fall, resulting in injury
and product damage.
•
Do not mount the unit directly below ceiling lights (such as
spotlights, fl oodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
How to remove the TV Stand
Remove four screws and take the TV Stand.
Rear of
the TV
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
Attach the Bottom Sheet
Bottom of
the TV
Accessories / Options
Batteries for the Remote
Control Transmitter
(2)
•
R6 (UM3)
ClamperRemote Control
Transmitter
•
EUR7651120
Standard accessories
Check that you have the accessories and items shown
Operating Instructions Pan European Guarantee Card
Installing remote’s batteries
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Using the clamper
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
•
Do not bundle the RF cable and mains lead together (could cause distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly manual to fi x cables.
To tighten:
Keep the knob pressed
Rear of the TV
To loosen:
Clamper
(Standard accessory)
Clamper
that bundle
mains lead
Bundle the
cables:
Hook the
clamper:
Tight
Lock
Bottom Sheet
Use when removing the
TV Stand (see below)
7
Quick Start Guide
TV
PROGRAMME
ASPECT
INPUT
RETURN
EXIT
MENU
OK
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
VCR DVD
TEXT F.P. INDEX HOLD
F TV AV
Identifying Controls
•
Identifying Controls
•
Accessories / Options
Cursor buttons to make selections and
adjustments
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes aspect ratio
(p. 13)
Selects programmes in sequence
Access VIERA Link Menu
(p. 31)
OK button to confi rm selections and choices
Press after selecting programme positions to
quickly change programme.
VCR / DVD operations (p. 15)
Volume
Programme Information
(p. 13)
Teletext Index (p. 17)
Coloured buttons used for the
selection, navigation and operation of
various functions
EXIT
(Returns to TV screen)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 28)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 16)
When in Standby mode, switches TV On.
Option menu
Sets the preferred settings of viewing
and sound options easily
(p. 13)
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus
(p. 18)
Viewing a favourite teletext channel (p. 17)
Surround (p. 20)
Changes the input mode
TV -
changes TV mode
(p. 14)
AV - changes AV input mode (p. 14)
Returns to the previous menu
Still picture
(p. 13)
Teletext Hold (p. 17)
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When in
Standby mode, switches TV On.
Mains power
On / Off switch
C.A.T.S. (Contrast Automatic Tracking System) sensor
(senses brightness to adjust picture quality in “Auto” Mode in Picture Menu) (p. 20)
Remote control
signal receiver
Changes the
input mode
Function select
•
Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble /
Balance / Auto Setup (p. 22)
Power LED
•
Standby: red
On: green
Teletext (p. 16)
8
L
R
Y
P
B
P
R
PC
AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
L
R
Y
P
B
P
R
PC
AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
RF IN
RF OUT
Basic Connection
Mains lead
Mains lead
SCART cable
(fully wired)
DVD Recorder or VCR
RF
cable
Aerial AerialRear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
RF cable
RF cable
TV only TV, DVD Recorder or VCR
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
Note
•
Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 28).
9
Quick Start Guide
RF OUTRF IN RF OUTRF INRF IN
L
R
Y
P
B
P
R
PC
AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
•
Basic Connection
DVD Recorder
or VCR
SCART cable
(fully wired)
RF cable
Aerial
Mains lead
Rear of the TV
Set top box
Example 3
Connecting DVD Recorder / VCR and Set top box
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
TV, DVD Recorder / VCR and Set top box
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable
10
Country
Portugal
Spain
Italy
France
Austria
Germany
Netherlands
Hungary
Czech
E.Eu
Ireland
Poland
Switzerland
Belgium
Finland
Norway
Sweden
Denmark
Greece
Auto Setup - DVB and Analogue
EXIT
This will take about 3 mins.
RETURN
Analogue Scan 21 68
DVB Scan 21 68
62
Channel Service Name Type Quality
CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62 BBC Radio Cymru DVB
10
62 E4 DVB
10
62 Cartoon Nmk DVB
10
CH 29 Analogue
-
CH 33 BBC1 Analogue
-
Auto Setup
EXIT
This will take about 3 mins.
RETURN
Scan 2214199
CH 29
Channel Service Name
CH 33
Auto Setup
INPUT
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
PROGRAMME
REC
VCR DVD
TEXT F.P. INDEX HOLD
TV
RETURN
EXIT
MENU
OK
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
Menüsprache
Slovenčina
Čeština
Еλληνικά
Italiano
Français
English
Srpski
Deutsch
Português
Türkçe
Suomi
Polski
Românǎ
Hrvatski
Nederlands
Slovenščina
Български
Magyar
Svenska
Dansk
Norsk
Español
Viewing Mode
Dynamic Normal Cinema Auto
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
Auto Setup is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
3
•
To edit channels
Editing and Setting Channels
(p. 22)
Select your country
4
Start Auto Setup
•
If a compatible recording equipment
with Q-Link or similar technologies
(p. 28) is connected, channel
information is automatically
downloaded to the equipment.
•
Auto Setup will start to search for
TV channels and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
2
Select the language
select
store
select
•
Also possible to change the setting
in Picture Menu (p. 20)
5
Select the picture setting
select
set
11
Quick Start Guide
Select
EXIT
Change
RETURN
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
MPX Stereo
Sound Menu
Reset to Default Set
MENU
EXIT
RETURN
(example: Sound Menu)
On-screen operation
guide will help you.
Ŷ
ON SCREEN HELP Instructions box
Open the main menu
Return to the previous menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
Note
•
If tuning have failed “Auto Setup”
(
p. 22).
•
If downloading have failed “Download”
(
p. 21).
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
Ŷ
How to use remote control
•
Auto Setup
Using the
On Screen
Displays
Exit the menu system and return to the normal viewing screen
12
INPUT
RETURN
MENU
DIRECT TV REC
PROGRAMME
REC
VCR DVD
TEXT F.P. INDEX
EXIT
TV
ASPECT
OK
OPTION
VCR
132
465
798
0
HOLD
1 BBS
Corontation Street
CH05 SC1 PAL
VCR
132
465
798
0
•
To select the two-digit programme number, e.g. 39
Watching TV
Select a channel
up
2
Information banner
Turn power on
Mains power On / Off switch should be On.
(Press for about 1 second)
down
or
1
9
(in a short time)
3
Volume
13
Viewing
•
Watching TV
HOLD
Freeze / unfreeze picture
Hold
Ŷ
Other useful functions (Operate after )
Change
aspect
ratio
Select
Access
EXIT
RETURN
Aspect Selection
16:9
Just
14:9
4:3 Full
4:3
Zoom1
Zoom2
Zoom3
Auto
A
SPECT
Change the aspect ratio (p. 34)
Enjoy viewing the picture at its optimum size and aspect.
Aspect Selection list
•
To change the mode
•
To change the mode using the ASPECT button only
A
SPECT
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
A
SPECT
During the list is displayed,
select the mode
Store
Display the
current
programme
status
OPTION
Check or change the current
programme status instantly
•
To change
Teletext Language
Selects teletext language
MPX
Sound Menu (p. 20)
Volume Correction
Adjusts volume of individual channel or input mode
Note
•
Also possible to change the settings in Menu list (p. 20 and p. 21).
select
change
Display
information
banner
Display programme information
For info press
Change Category
STTL
Bad Signal Encrypted
AD
Now
TXT
Profile 1
23:35
1 BBS
Corontation Street
Stereo 45
CH05 SC1 PAL
•
To set display timeout
“Banner Display Timeout” (p. 21)
•
Appears also when changing channel.
•
Current time and Programme informations
are referred to teletext signal.
•
To select another channel
•
To hide
EXIT
Stereo sound
Off timer
Features available
Programme
Channel
Teletext
Sound mute
Sound system
Colour system
14
ASPECT
RETURN
EXIT
MENU
DIRECT TV REC
OPTION
TEXT F.P. INDEX HOLD
TV
PROGRAMME
INPUT
OK
VCR
132
465
798
0
REC
VCR DVD
Watching Videos and DVDs
2
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the input mode connected to the equipment
Note
•
If the external equipment has an aspect adjustment function, set to “16:9”.
•
For details, see the manual of the equipment or ask your local dealer.
Ŷ
To return to TV
Display the Input select menu
Displays the selected mode
1
Turn the TV on
Ŷ
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts
•
Input signals are automatically identifi ed by the SCART (pin 8)
terminal.
•
This function is also available for HDMI connections (p. 31).
Ŷ
If input mode is not switched automatically
Perform and
•
You can also select the input using the AV button on the remote
control or the top panel of the TV.
Press the button repeatedly until the desired input is selected.
•
You can label or skip each input modes “Input Labels” (p. 26)
•
Dependant on the setup of the equipment
Input Selection
AV1
AV2/AV2S
AV3/AV3S
COMPONENT
PC
HDMI1
HDMI2
TV
4
View
select
watch
15
Viewing
•
Watching Videos and DVDs
VCR DVD
VCR DVD
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
PROGRAMME
Programme Up / Down
Select programme
REC
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
•
Confi rm correct operation after the code changed.
•
The codes will be reset to default values if batteries are replaced.
•
“DVD” means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
Press
“VCR” position
Equipment Code
VCR 10 (default)
DVD 11
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre
71
VCR
132
465
798
0
16
ASPECT
INPUT
RETURN
EXIT
PROGRAMME
REC
VCR DVD
OPTION
DIRECT TV REC
TV
MENU
OK
VCR
132
465
798
0
TEXT F.P. INDEX HOLD
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
TEXT
red
green
yellow
blue
VCR
132
465
798
0
Viewing Teletext
Switch to Teletext
1
Select the page
up
or
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
or
Ŷ
To return to TV
TEXT
(Corresponds to the colour bar)
•
Displays Index
(content varies
depending on the
broadcasters)
down
Time / date
Current
page
number
Sub page number
Colour bar
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 17)
Ŷ
To change mode “Teletext” in Setup Menu (p. 21)
Ŷ
To adjust contrast
MENU
As the blue bar is displayed
Reveal
hidden
data
MENU
red
•
Re-hide
red
Reveal hidden words e.g. quiz page answers
Ŷ
Using teletext conveniently
FULL /
TOP /
BOTTOM
MENU
green
Normal (FULL)(BOTTOM)
(Expand the BOTTOM half)
2
(TOP)
(Expand the TOP half)
17
Viewing
Call up a
favourite
pages
F.P.
•
Call up the page stored in “blue”.
•
Factory setting is “P103”.
•
Viewing Teletext
INDEX
INDEX
•
FLOF / List mode
Return to the main index page
HOLD
HOLD
If you wish to hold the current page without updating
Stop or resume automatic updating
Ŷ
To resume
HOLD
Store
frequently
viewed
pages
VCR
132
465
798
0
Store frequently viewed pages in the colour bar
(List mode only)
As page is
displayed
The number changes to white.
Corresponding
colour button
Ŷ
To change stored pages
Enter new page number
Colour button you
want to change
View sub
page
0 0 0
6
•
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Enter the
4-digit number
example: P6
Appears at upper-left
corner of the screen
Ŷ
To view specifi c sub page
MENU
blue
View sub page (Only when teletext is more than one page)
Watch
TV while
waiting
for update
P108
MENU
yellow yellow
Appears
when
updating is
completed
(You cannot change the channel.)
Teletext automatically updates itself when new information becomes available.
•
The news page provides a function that indicates arrival of latest news (“News Flash”).
Changes to TV screen temporarily
View the
updated
page
View the TV picture while searching for a teletext page
View in
multi
window
MENU
Watch TV and Teletext in two windows at once
•
Operations can be made only in Teletext screen.
(Press twice)
•
Select Picture and text
On or Off
press
and
hold
press
and
hold
Main Menu
VIERA Link
Picture
Sound
Setup
Picture Menu 1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Normal
Colour Management On
P-NR Auto
VCR
132
465
798
0
INPUT
ASPECT
OPTION
DIRECT TV REC
TEXT F.P. INDEX HOLD
PROGRAMME
REC
VCR DVD
TV
RETURN
EXIT
MENU
OK
Picture Menu 1/2
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Normal
Colour Management On
P-NR Auto
Viewing Mode Dynamic
Colour Balance Normal
Sharpness
Tuning Menu Access
MENU
18
How to Use Menu Functions
Display the menu
3
2
4
Various menus allow you to make settings for the picture, sound, and other functions.
•
Displays the functions that can be set
(varies according to the input signal)
Note
•
To initialize all settings
“Shipping Condition”
(p. 25).
Ŷ
To return to TV
at any time
EXIT
Ŷ
To return to the
previous screen
RETURN
Select the menu
Select the item
(example: Picture Menu)
Adjust or select
(example: Picture Menu)
(example: Picture Menu)
Changed
Number and positions
of alternatives
Moved
Ŷ
Choose from among alternatives
Ŷ
Adjust using the slide bar
1
Displays the next screen
Ŷ
Go to the next screen
Ŷ
To change menu pages
up
down
select
access
select
change
store or access
(Required by some
functions)
Advanced
19
•
How to Use Menu Functions
(picture, sound quality, etc.)
Ŷ
Overview
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
(p. 31)
Main Menu
VIERA Link
Picture
Sound
Setup
The menu of the accessed
equipment
1/2
Viewing Mode Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Normal
Colour Management On
P-NR Auto
Picture Menu
2/2
3D-COMB On
Reset to Default Set
Picture Menu
MPEG NR Off
(p. 20)
2/2
Reset to Default Set
Sound Menu
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
MPX Stereo
Sound Menu
HDMI1 Input Auto
1/2
(p. 20)
1/2
AV Colour System
Q-Link Settings Access
Child Lock Access
Tuning Menu
Teletext FLOF
Access
Setup Menu
Language Access
Off Timer Off
Auto
Shipping Condition Access
Input Labels Access
Access
2/2
Banner Display Timeout
3 seconds
Software License
System Information Access
Access
Setup Menu
VIERA Link
On
(p. 21)
Q-Link Settings
Q-Link AV2
AV2 out TV
Download Access
(p. 21)
Access
Tuning Menu
Auto Setup Access
Programme Edit Access
Manual Tuning Access
(p. 22)
•
Only available items can be selected.
Menu
Item Adjustments / Confi gurations (alternatives)
VIERA Link
VIERA Link Control
Controls the connected Panasonic equipment
“Easy control only with VIERA remote control” (p. 31)
“Speaker control” (p. 31)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Speaker Selection
Picture
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema / Auto)
•
Set for each input signal
Contrast, Brightness,
Colour, Sharpness
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Tint
Adjusts tint of image
•
For NTSC signal reception only
Colour Balance
Chooses the colour balance of the entire image (Cool / Normal / Warm)
Colour Management
Automatically adjusts colours to vivid ones (Off / On)
•
Not valid on PC signal
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
•
Not valid on HDMI or PC signal
MPEG NR
Automatically reduces noise for watching DTV, DVD and VCD (Off / Min /Mid / Max)
3D-COMB
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components, PC and HDMI
Reset to Default
Press the OK button to reset the present Picture Mode to the default settings
Sound
Mode
Basic sound mode (Music / Speech)
Bass
Adjusts the output level of deep bass
Treble
Adjusts the output level of high-pitch, shrill sound
Balance
Adjusts volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings (Off / On)
Provides a dynamic enhancer to simulate improved spatial effects
•
Switching is also possible by the Surround button on the remote control (p. 7)
Volume Correction
Adjusts volume of individual channel or input mode
MPX
Select stereo / monaural (Mono / Stereo)
•
Normally: Stereo
•
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
HDMI1 Input
Select to fi t the input signal (Auto / Digital / Analogue) (p. 29)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
Reset to Default
Press the OK button to reset the present Sound Mode to the default settings
20
Ŷ
Menu list
How to Use Menu Functions
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
Panasonic TX32LX70P Operating instructions
- Category
- LCD TVs
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic VIERA TH-42PV7AZ Operating Instructions Manual
-
-
-
Panasonic TH42PY700P Operating instructions
-
-
-
Panasonic TH42PV45E Owner's manual
