BLACK+DECKER F20 Owner's manual

Category
Power tools
Type
Owner's manual
2
English 4
Deutsch 8
Français 13
Italiano 17
Nederlands 21
Español 25
Português 30
Svenska 35
Norsk 39
Dansk 43
Suomi 47
EÏÏËÓÈη 51
Copyright Black & Decker
4
ENGLISH
CORDLESS DRILL/SCREWDRIVER F20
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
F20
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, EN 50260
Level of sound pressure, measured according to
EN 50260:
F20
L
pA
(sound pressure) dB(A) 70
L
WA
(acoustic power) dB(A) 83
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50260:
F20
< 2.5 m/s
2
Colin Wills
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
INTENDED USE
Your Black & Decker drill/screwdriver F20 has been
designed for drilling in softwood and plasterboard
as well as for inserting and removing screws and
nuts using the appropriate accessories. This tool is
not suitable for accessories with a diameter of
more than 6 mm.
This tool is intended for consumer use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Know your tool
Warning! When using battery-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.
Read all of this manual carefully before
operating the tool.
Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
5
ENGLISH
General
1. Keep work area clean
Cluttered areas and benches can cause accidents.
2. Consider work area environment
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit. Do not use the tool where there is
a risk of causing fire or explosion, e.g. in the
presence of flammable liquids and gases.
3. Keep children away
Do not allow children, visitors or animals to
come near the work area or to touch the tool.
4. Dress properly
Do not wear loose clothing or jewellery, as these
can be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair
covering to keep long hair out of the way.
5. Personal protection
Always use safety glasses. Use a face or dust
mask whenever the operations may produce
dust or flying particles. Wear ear protection
whenever the sound level seems uncomfortable.
6. Do not overreach
Keep proper footing and balance at all times.
7. Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
8. Secure workpiece
Use clamps or a vice to hold the workpiece. It is
safer and it frees both hands to operate the tool.
9. Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for
which it was intended. Do not force the tool.
Warning! The use of any accessory or attachment
or performance of any operation with this tool
other than those recommended in this instruction
manual may present a risk of personal injury.
10.Check for damaged parts
Before use, carefully check the tool for
damage. Check for misalignment and seizure
of moving parts, breakage of parts, damage to
guards and switches and any other conditions
that may affect its operation.
Ensure that the tool will operate properly and
perform its intended function. Do not use the
tool if any part is damaged or defective. Do not
use the tool if the switch does not turn it on
and off. Have any damaged or defective parts
repaired or replaced by an authorised repair
agent. Never attempt any repairs yourself.
11.Avoid unintentional starting
Do not carry the tool with a finger on the
on/off switch.
12.Store idle tools
When not in use, tools and batteries should be
stored in a dry, locked up or high place, out of
reach of children.
13.Maintain tools with care
Keep cutting tools sharp and clean for better
and safer performance. Follow the instructions
for maintenance and changing accessories.
Keep handles and switches dry, clean and free
from oil and grease.
14.Repairs
This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for
non-rechargeable batteries
Never attempt to open for any reason.
Do not store in locations where the temperature
may exceed 40 °C.
When disposing of batteries, follow the
instructions given in the section “Protecting the
environment”. Do not incinerate the batteries.
Under extreme conditions, battery leakage
may occur. When you notice liquid on the
batteries, proceed as follows:
- Carefully wipe the liquid off using a cloth.
Avoid skin contact.
OVERVIEW (fig. A)
1. On/off switch (forward)
2. On/off switch (reverse)
3. Spindle lock collar
4. Bit holder sleeve
5. Battery holder
6
ENGLISH
ASSEMBLY
Before assembly, engage the spindle lock
as described below.
Fitting an accessory (fig. B)
Hold the unit in one hand.
Pull the sleeve (4) back.
Insert the shank of the accessory (6) into the
holder.
Release the sleeve.
Fitting and removing batteries (fig. C)
This tool uses 4 alkaline batteries (size AA).
For optimum performance, we recommend only
to use batteries from a known brand.
Fitting
Keeping the tabs (7) depressed, pull the
battery holder out of the tool.
Insert the batteries into the battery holder,
orientating the plus terminal (+) of each battery
as shown on the battery holder.
Insert the battery holder into the tool and push
until it clicks into place.
Removing
Keeping the tabs (7) depressed, pull the
battery holder out of the tool.
Take the batteries from the battery holder.
USE
Let the tool work at its own pace.
Do not overload.
Manual spindle lock (fig. D)
The manual spindle lock allows you to use the tool
as a regular manual screwdriver. You can give an
extra twist to firmly tighten a screw or to loosen a
very tight screw.
To activate the spindle lock, turn the collar (3)
to show the symbol.
To release the spindle lock, turn the collar (3)
to show the
symbol.
Do not attempt to operate the tool when
the spindle lock is activated.
Operating the tool (fig. A)
Make sure that the spindle lock is released.
To tighten a screw or nut, keep the on/off
switch (1) depressed.
To loosen a screw or nut, keep the on/off
switch (2) depressed.
To switch the tool off, release the on/off
switch.
Hints for optimum use
Always use the correct type and size of
screwdriver bit.
If screws are difficult to tighten, try applying a
small amount of washing liquid or soap as a
lubricant.
Use the spindle lock to loosen very tight screws
or to firmly tighten screws.
Always hold the tool and screwdriver bit in a
straight line with the screw.
When drilling in plasterboard, use a 6 mm drill
bit for the supplied plugs.
When screwing in wood, drill a 2.5 mm pilot
hole for the supplied screws. A pilot hole
guides the screw and prevents splintering or
distortion of the wood.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Tools
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
7
ENGLISH
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com.
Batteries
If you want to dispose of the tool yourself,
the batteries must be removed as
described above and disposed of in
accordance with local regulations.
Place the batteries in a suitable packaging to
ensure that the terminals cannot be short-
circuited. Take the batteries to a local recycling
station.
Technical data
F20
Voltage V
DC
4 x 1.5
Battery type AA-size, alkaline
No-load speed min
-1
130
Drilling capacity
in wood/plasterboard mm 6
Max. torque Nm 2.9
Bit holder 6.35 mm hex
Weight kg 0.29
GUARANTEE
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in
no way prejudices your statutory rights.
The guarantee is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
The product has been used for trade,
professional or hire purposes;
The product has been subjected to misuse or
neglect;
The product has sustained damage through
foreign objects, substances or accidents;
Repairs have been attempted by persons other
than authorised repair agents or Black & Decker
service staff.
To claim on the guarantee, you will need to submit
proof of purchase to the seller or an authorised
repair agent. You can check the location of your
nearest authorised repair agent by contacting your
local Black & Decker office at the address
indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full
details of our after-sales service and contacts are
available on the Internet at: www.2helpU.com.
The batteries supplied with this tool are not
covered by the guarantee.
59
verktøj?
Onko tämä ensimmäinen
B&D-koneesi?
E›Ó·È ÙÔ ÂÚÁ·Ï›Ô
·˘Ùfi Ë ÚÒÙË Û·˜ ·ÁÔÚ¿?
Yes
Ja
Oui
Si
Ja
Sim
Ja
Ja
Ja
Kyllä
¡·È
No
Nein
Non
No
Nee
No
Não
Nej
Nei
Nej
Ei
√¯È
Dealer address
Händleradresse
Cachet du revendeur
Indirizzo del
rivenditore
Adres van de dealer
Dirección del detallista
Morada do
revendedor
Återförsäljarens adress
Forhandlerens adresse
Forhandler
adresse
Jälleenmyyjän osoite
¢È‡ı˘ÓÛË ·ÓÙÈÚÔÛÒÔ˘
...........................................................
...........................................................
Cat. no.:
Is this tool a gift?
Ist dieses Gerät
ein Geschenk?
S’agit-il d’un cadeau?
Si tratta di un regalo?
Kreeg u de
machine als cadeau?
¿Ha recibido
usted esta herramienta como regalo?
Recebeu esta ferramenta como
presente?
Är verktyget en gåva?
Er verktøyet en gave?
Er verktøjet
en gave?
Onko kone lahja?
∆Ô ÂÚÁ·ÏÂ›Ô Â›Ó·È ‰ÒÚÔ?
Yes
Ja
Oui
Si
Ja
Sim
Ja
Ja
Ja
Kyllä
¡·È
No
Nein
Non
No
Nee
No
Não
Nej
Nei
Nej
Ei
√¯È
Is this tool your first purchase?
Ist
dieses Gerät ein Erstkauf?
Est-ce un
1er achat?
Questo prodotto è il suo
primo acquisto?
Is deze machine uw
eerste aankoop?
¿Es esta
herramienta la primera de este tipo?
Esta ferramenta é a sua primeira
compra?
Är detta ditt första B&D-
verktyg?
Er dette ditt første B&D
verktøy?
Er dette dit første B&D
Dealer address Date of purchase
Händleradresse Kaufdatum
Cachet du revendeur Date d’achat
Indirizzo del rivenditore Data d’acquisto
Adres van de dealer Aankoopdatum
Dirección del detallista Fecha de compra
Morada do revendedor Data de compra
Återförsäljarens adress Inköpsdatum
Forhandlerens adresse Innkjøpsdato
Forhandler adresse Indkøbsdato
Jälleenmyyjän osoite Ostopäivä
¢È‡ı˘ÓÛË ·ÓÙÈÚÔÛÒÔ˘ ∏ÌÂÚÔÌËÓ›· ·ÁÔÚ¿˜
Name
Name
Nom
Nome
Naam
Nombre
Nome
Namn
Navn
Navn
Nimi
√ÓÔÌ·:
...........................................................
Address
Adresse
Adresse
Indirizzo
Adres
Dirección
Morada
Adress
Adresse
Adresse
Osoite
¢È‡ı˘ÓÛË:
...........................................................
...........................................................
Town
Ort
Ville
Cittá
Plaats
Ciudad
Localidade
Ort
By
By
Paikkakunta
¶fiÏË:
...........................................................
Postal code
Postleitzahl
Code
postal
Codice postale
Postcode
Código
Código postal
Postnr.
Postnr.
Postnr.
Postinumero
∫ˆ‰ÈÎfi˜
...........................................................
Data protection act: Tick the box if
you prefer not to receive further
information.
Bitte ankreuzen, falls Sie
keine weiteren Informationen erhalten
möchten.
Si vous ne souhaitez pas
recevoir d’informations, cochez cette
case.
Barrate la casella se non
desiderate ricevere informazioni.
A.u.b. dit vakje aankruisen indien u
geen informatie wenst te ontvangen.
Señale en la casilla sino quiere recibir
información.
Por favor, assinale com
uma cruz se não desejar receber
informação.
Vänligen kryssa för i
rutan om Ni inte vill ha information.
Vennligst kryss av dersom du ikke
ønsker informasjon.
Venligst sæt
kryds i ruden såfremt De ikke måtte
ønske at modtage information.
Merkitkää rasti ruutuun, mikäli ette
halua vastaanottaa informaatiota.
¶·Ú·Î·Ï›ÛÙ ӷ ÛËÌÂÈÒÛÂÙ ¿Ó
‰ÂÓ ı¤ÏÂÙ ӷ ¿ÚÂÙ ÏËÚÔÊÔڛ˜.
60
GUARANTEE CARD
GARANTIEKARTE
CARTE DE GARANTIE
TAGLIANDO DI GARANZIA
GARANTIEKAART
TARJETA DE GARANTÍA
CARTÃO DE GARANTIA
GARANTIBEVIS
GARANTI KORT
GARANTI KORT
TAKUUKORTTI
∫∞ƒ∆∞ E°°À∏™∏™
Español Después de haber comprado su herramienta envíe
usted, por favor, esta tarjeta a la central de
Black & Decker en su país.
Português Por favor, recorte esta parte, coloque-a num envelope
selado e endereçado e envie-o logo após a compra do
seu produto para o endereço da Black & Decker do
seu país.
Svenska Var vänlig klipp ur denna del och sänd den i ett frankerat
kuvert till Black & Deckers adress i Ditt land.
Norsk Vennligst klipp ut denne delen umiddelbart etter du
har pakket ut ditt produkt og legg det i en adressert
konvolutt til Black & Decker (Norge) A/S.
Dansk Venligst klip denne del ud og send frankeret til
Black & Decker i dit land.
Suomi Leikkaa irti tämä osa, laita se kuoreen ja postita kuori
paikalliseen Black & Decker osoitteeseen.
EÏÏËÓÈη ¶·Ú·Î·ÏÒ Îfi„ÂÙ ·˘Ùfi ÙÔ ÎÔÌÌ¿ÙÈ Î·È Ù·¯˘‰ÚÔÌ‹Û·ÙÂ
ÙÔ ·Ì¤Ûˆ˜ ÌÂÙ¿ ÙËÓ ·ÁÔÚ¿ ÙÔ˘ ÚÔ˚fiÓÙÔ˜ Û·˜ ÛÙËÓ
‰È‡ı˘ÓÛË Ù˘ Black & Decker ÛÙËÓ EÏÏ¿‰·.
English Please complete this section immediately after the
purchase of your tool and send it to Black & Decker in
your country. If you live in Australia or New Zealand,
please register by using the alternative guarantee card
supplied.
Deutsch Bitte schneiden Sie diesen Abschnitt ab, stecken ihn in
einen frankierten Umschlag und schicken ihn an die
Black & Decker Adresse Ihres Landes.
Français Découpez cette partie et envoyez-la sous enveloppe
timbrée à l’adresse de Black & Decker dans votre pays,
ceci immédiatement après votre achat.
Italiano Per favore ritagliate questa parte, inseritela in una
busta con francobollo e speditela subito dopo
l’acquisto del prodotto all’indirizzo della
Black & Decker nella vostra nazione.
Nederlands Knip dit gedeelte uit en zend het direct na aankoop in
een gefrankeerde, geadresseerde envelop naar het
adres van Black & Decker in uw land.
5102160-01
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

BLACK+DECKER F20 Owner's manual

Category
Power tools
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI