AEG SB7500 User manual

Page is loading ...

2

www.aeg.com

B

A

H

J

I

G

C

D

E

F

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 2 2017-07-06 15:17:13

3

www.aeg.com

A

B

A

B

C

A

B

C

A

BC

B

C

A

1

7

2

8

64 5

3

9

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 3 2017-07-06 15:17:15

4

www.aeg.com

Visit our website to:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories and Consumables for

www.aeg.com/shop

CONTENTS

ENGLISH 6

DEUTSCH 9

13

ESPAÑOL 16

FRANÇAIS 20

 23

ITALIANO 27

NEDERLANDS 31

PORTUGUÊS 34

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help make life simpler features

you might not nd on ordinary appliances. Please spend a few minutes reading to get the very best from it.

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available:

- Model Number

- PNC number

- Serial number

The information can be found on the rating plate.



SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 4 2017-07-06 15:17:15

5

www.aeg.com

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 5 2017-07-06 15:17:15

6

www.aeg.com

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and

spare parts. They have been designed especially for your product. This product is designed with the environment in

mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A. Jug

B. Spout

C. Lid with ller hole

D. Measuring cup

E. Rubber seal

F. Blade assembly, detachable

G. Locking collar

H. Motor housing

I. Control panel

J. Non-slip feet

Picture page 2-3

GETTING STARTED

1 Before using the blender for the rst time, wash all parts except for the motor housing. Assembling: Place the

blade rubber seal on top of the blade assembly (A). Then place the blade assembly with the rubber seal into the col-

lar (B). Carefully assemble the blades and collar into the jug. Tilt the collar slightly for easy access of knives into the

jug. Once in place, turn the collar counter-clockwise to lock in place (C ).

2 Place the blender on a at surface and then place the jug on top of the motor housing. The jug can be placed is

several dierent positions with handle on either sides, or in front. Put the ingredients in the jug.

(Do not exceed the maximum level as indicated on the jug.)

3 Close the lid (A) and insert the measuring cup in the ller hole and (B) lock into position. (You can use the measur-

ing cup to add ingredients while the blender is running. Close the ller hole immediately after, to avoid splashing.)

Caution! When processing hot liquids, see paragraph 4.

4 Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before lling the jug. Fill the

jug only half full and start processing on low speed. The blender jug can become very warm – take care to protect

your hands and to ventilate steam out through the ller hole. Always replace the lid before use.

5 Start the blender:

Plug into mains. Press the On/O button

(A)

, the LED light will illuminate. Press the “Low”

(B)

or

“High”

(C)

button to select your desired processing speed, or choose one of 3 special functions. Light will indicate the

speed selected. To pause, press the selected speed button again.

Auto-O:

If the machine is not turned o manually, the Safety Auto-O function turns it o after

30

minutes.

6 Pulse Function: Press the “Pulse” button (A) when you need a short burst of power.

Smoothie Function: Press the “Smooth” button (B) to get ice crushed and your smoothie blended to the desired

consistency.

Crush Ice Function: Press the “Crush” button (C) to crush ice.

(For best results, work in small batches.)

CLEANING AND CARE

7 Quick cleaning:

Pour warm water into the jug, add a few drops of detergent. Mix water and detergent by pressing the

“PULSE” button. Finally, rinse the jug under running water.

8 Thorough cleaning:

Turn the blender o and unplug the power cord. Wipe the motor housing with a damp cloth.

Warning!

Never immerse the housing, plug, and cord in water or any other uid.

9 Remove the lid and jug.

Turn the collar clockwise to unlock. Then carefully remove the collar and knives by pulling the collar downwards. Lift

o the blade assembly and the rubber seal from the collar. Rinse the blade assembly in water and detergent.

Caution! Handle carefully, the blades are very sharp!

The lid, jug and measuring cup can be washed in the dish-

washer.

Enjoy your new AEG product!

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 6 2017-07-06 15:17:15

7

www.aeg.com

GB

DE

AR

ES

FR

GR

IT

NL

PT

SAFETY ADVICE

Read the following instruction carefully before using the appliance for the rst time.

• This appliance shall not be used by children. Keep the appliance and its cord out of

reach of children. Appliances can be used by persons with reduced physical, sensory

or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe way and if they

understand the hazards involved. Children shall not play with the appliance.

• The appliance may only be connected to a power supply whose voltage and

frequency comply with the specications on the rating plate!

• Never use or pick up the appliance if

– the supply cord is damaged,

– the housing is damaged.

• If the appliance or the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualied person, in order to avoid hazard.

• Always place the appliance on a at, level surface.

• Always disconnect the appliance from the supply if it is left unattended and before

assembling, disassembling or cleaning.

• Never touch the blades or inserts with your hand or any tools while the appliance is

plugged in.

• The blades and inserts are very sharp! Danger of injury! Caution when assembling,

disassembling after use or when cleaning! Ensure that the appliance is disconnected

from the mains supply.

•

Do not immerse the appliance in water or any other liquid.

• Do not let the blender run for more than 2 minutes at a time using heavy loads. After

running for 2 minutes with heavy loads, the blender should be left to cool for at least

10 minutes.

• Do not exceed the maximum lling volume as indicated on the appliances.

• Never process boiling liquids (max 90 °C).

• Do not use this appliance to stir paint. Danger, could result in an explosion!

• Never operate appliance without lid.

• Do not let the power cord touch hot surfaces or hang over edge of table or counter.

• Never use accessories or parts made by other manufactures not recommended or

sold; may cause a risk of injury to persons.

• The appliance can not be used for blending or grinding hard and dry substance,

except for ice cubes.

• Keep hands and utensils out of the blender during operation to reduce the risk of

severe injury to persons or damage to the blender.

• Ensure that the blender is switched o before removing it from the stand.

• This appliance is intended for domestic use only. The manufacturer cannot accept

any liability for possible damage caused by improper or incorrect use.

• CAUTION - NEVER PLACE BLADE ASSEMBLY ON BASE UNLESS ASSEMBLED TO JAR.

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 7 2017-07-06 15:17:15

8

www.aeg.com

TROUBLESHOOTING

SYMPTOM CAUSE SOLUTION

The blender does not

switch on.

Components are not xed properly. Check if all the components are properly locked

into position.

The On/O button is not pressed. Make sure the On/O button is illuminated.

If not, press the On/O button to turn the

blender on.

The jug is overlled. Empty the jug so you do not exceed the

maximum level.

The plug is not properly connected to the power

outlet.

Check the connection of the plug to the outlet

or try another outlet.

Power outage. Wait until power outage is over.

Functional problem. Contact authorized service.

The appliance is overheated and the thermal

protector was activated.

Unplug the appliance from the socket and

leave it to cool down for at least an hour before

next use.

RECIPES

MAXIMUM PROCESSING TIME WITH HEAVY LOAD MAXIMUM CAPACITY

2 min 1650 ml

RECOMMENDED BLENDING SPEED

Recipe Ingredients Quantity Time Speed

Pureeing raw vegetables

Carrots 20~80 g

20~30 s High

Potatos 20~80 g

Onions 20~80 g

Water 60~160 g

Strawberries margaritas (Cocktail)

Tequila 240 ml

≤ 90 s Smooth

Triple sec 60 ml

Frozen strawberries 225 g

Frozen Lemonade concentrate 145 g

Ice cubes 150 g

Pineapple-apricots Smoothie

Pineapple in slices 250 g

≤ 90 s HighDried Apricots 40 g

Yoghurt 300 g

Milkshake

Milk 150-300 ml

20~30 s Smooth

Vanilla Ice cream 200-400 g

Banana ¼ - ½ pcs

Chocolate syrup 30-60 g

Potato leek soup

Potatoes 400 g

30~40 s HighLeek 400 g

Water 800 g

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 8 2017-07-06 15:17:15

Page is loading ...

Electrolux Hausgerate GmbH

Further Strasse 246

D-90429 Nurnberg

Germany

Printed on recycled paper

www.aeg.com

www.aeg.com/shop

3483 A SB7XXX 02 01 0717

SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 40 2017-07-06 15:17:19

AEG SB7500 User manual

This manual is also suitable for

AEG SB7500 User manual

in other languages

Related papers

Other documents