Page is loading ...
Gas Module
BOX CONTENTS e-sylife
Gas Module (78 x 54 x 27 mm / 70g) with battery
Gas meter* with cable
This document
REQUIRED SYSTEM CONFIGURATION
Owning an e-sylife Kub connected to the internet.
*The Gaz meter to connect with the Gas module is in a separate box
Made in France
www.e-sylife.com
NEED HELP ?
http://www.e-sylife.com/en/aide-a-
linstallation/
QUICK INSTALLATION GUIDE
The Gas module allows you to monitoring the gas consumption in your home, to raise
your family and save up to 15% on your bill.
Connecting the Gas Module
Add the Gas Module to your installation by logging into your customer
account, click on "My Home " icon, then "My modules". Click "ADD
MODULE" and enter the module number and the security number found on
the back of the module.
Wait a minute.
Connect the gas meter’s power cable to the Gas module plug.
Stay close to the Kub when you remove the tab from the battery of the Gas
module to put the module into service. After you can put the module at its
ultimate placement. It could appear “not connected” (NC) during the first 2
hours.
We advise you to call a professional to install the gas meter.
Don’t hesitate to contact us in order to know the list of installers.
Your Gas Module is now in ready to go.
For more details please read the user’s guide, available in your
"Customer account".
/