1. Make sure the Vacuum/Compressor switch is set to the middle “OFF” setting.
2. Remove the plastic valve cover from the tire you wan to inflate.
3. Screw one end of the flexible air hose (F) on to the compressor, and screw the other end on to the valve of the tire you want to inflate.
4. Turn the car ignition on.
5. Insert the DC12V adapter into the cigarette lighter of the car.
6. Slide the Vacuum/Compressor switch back to the “Compressor” setting.
7. Check the built-in air pressure gauge on the compressor to monitor desired pressure level.
ATTACHMENTS FOR OTHER INFLATABLE OBJECTS
The air compressor can be used for inflating a soccer ball, basket balls and other objects with the included adapters.
COMPRESSOR OPERATING INSTRUCTIONS
2-IN-1 WET & DRY VACUUM WITH AIR COMPRESSOR
HW2322
- Read all the instructions carefully prior to use and clean filter regularly.
- Do not submerge the main unit in water.
- Do not over-inflate.
- Use the proper adapter.
- Always refer to the tire's or the item to be inflated user manual for recommended air pressure.
- If the compressor has been running for more than 10 minutes. Please turn off and let it cool to avoid overheating.
- This is not a toy. Please keep away from children.
WARNING