5019 301 05476
Whirlpool is a registered trademark of Whirlpool USA.
;
Programme
Care
Labels
Type of wash/Notes
Max Load
Detergents and additives Special options
Max
Spin
Speed
rpm
Programme
Selector
Bleach Softener Main Wash Prewash Rapid Prewash Intensive
Rinse
Rinse
Hold
Spin Speed
Reduction
Kg
Cotton/
Coloured cotton
Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected
as well.
Normal
6.2
Rapid 3.0
❉❉
Yes
❉❉❉❉❉ ❉
850
95°,60°,40°
Synthetics
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Normal
2.5
Rapid 1.5
—
❉
Yes
❉❉❉❉❉
❉
1)
600
1)
60°,40°
Daily
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
—
❉
Yes —
——
❉❉❉
850
Short
Shortly worn outer clothing made of cotton, polyester, polyamide and
blends with cotton.
3.0
—
❉
Yes —
——
❉❉❉
850
Delicates
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
—
❉
Yes
❉
—
❉
—
❉
❉
1)
600
1)
40°,30°
Wool
Only woollens with a felt-free finish, labelled with the woolmark and
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
—
❉
Yes —
—— —
❉
❉
1)
600
1)
30°,20°
Silk
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
1.0
—
❉
Yes —
—— —
❉
—
0
2)
30°
Rinse + spin —
Same as the last rinse and the final spin in the “Coloured Cotton”
programme.
6.2
—
❉
————
❉❉❉
850
Spin —
In this programme spinning is intensive. Same as the spin cycle in the
“Coloured Cotton” programme.
6.2
—— — — — — — —
❉
850
Gentle spin —
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
1.5
—— — — — — — —
❉
1)
600
1)
Drain —
Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
—
—— — — — — — — —
—
A. Programme Sequence Indicator
B. “Start/Pause” Button
C. “Door Open” Indication
D. “Spin Speed Reduction” Button
Selecting any option the indication lights up.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
❉
: optional / Yes : dosing required
1
For improved garment care spin speed is restricted to
600 rpm in this programme.
2
For improved garment care spin speed is null in this
programme.
A
D
CB
AWM 6085
GB
3gb05476.fm Page 1 Wednesday, May 21, 2003 11:16 AM
Black process 45.0° 100.0 LPI
5019 301 05476
Whirlpool is a registered trademark of Whirlpool USA.
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Add the detergent as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Turn the
programme selector knob
to the
desired programme and temperature.
2. After taking some seconds for calculating, the
pilot lamp of the
“Start/Pause”
button is
flashing.
3. The programme sequence and the predefined
spin speed indication corresponding to the
selected programme lights up.
Selecting any option the indication lights up.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
“Rapid Wash” button
• For quick, economical washes. Ideal for minimum
loads of lightly-soiled articles.
Note:
reduce the detergent quantity.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. The cycle time increases
approximately 15 min.
“Intensive Rinse” button
• More water and a longer time in rinse cycle is
added.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)*
Cotton 90 5.0 49** 1.70 2:00
Cotton 60 5.0 44 0.95 2:00
Cotton 40 5.0 44 0.60 2:05
Synthetics 60 2.5 55 0.80 1:30
Synthetics 40 2.5 55 0.60 1:20
Daily 40 3.0 44 0.45 1:00
Short 30 3.0 37 0.40 0:30
Delicates 40 1.5 60 0.60 0:45
Wool 30 1.0 60 0.30 0:40
Silk 30 1.0 45 0.30 0:40
ADD DETERGENTS, CLOSE THE DOOR AND SELECT
THE PROGRAMME
SELECT ANY DESIRED OPTION
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programme “Synthetics”, “Daily” and
“Delicates”.
• This function is particularly useful if you want
to postpone spinning to a later time, or if you
want to drain only.
Note:
The programme stops to “Rinse Hold” at the
time the “Rinse Hold” light in the programme flow
indication is on.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the
“Start/Pause”
button
again when flashing.
“Spin Speed Reduction” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “
0
” is selected, the final
spinning is cancelled but intermediate spin
peaks remain during rinse. The water is drained
out only.
Open the tap and press the
“Start/Pause”
button.
The pilot lamp of the
“Start/Pause”
button lights
up.
The indicator lamps show the sequence reached in
the programme. After starting the programme, the
sequence indication runs from left to right through
Wash, Rinse, Spin.
When the sequence of the programme is finished
the corresponding lamp goes out.
The door can be opened when the “Door Open”
indication is on.
• All the lights of the programme sequence
indication are off.
1. Turn the programme selector to the
“”
position.
2. Turn the water supply tap off.
3. Open the door and unload the machine.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you
want.
3. Press the
“Start/Pause”
button again. The
new programme continues at the same position
where the previous programme was
interrupted. Do not add detergent for this
programme.
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Set the programme selector to “Drain”. The
spin indicators show
“0”
and the remaining
time shows “0:02”.
3. Press the
“Start/Pause”
button to start the
drain programme.
PROGRAMME START
DOOR LOCK
PROGRAMME END
CHANGE THE PROGRAMME, OPTIONS AFTER
PROGRAMME START
CANCEL A PROGRAMME BEFORE THE END
3gb05476.fm Page 2 Wednesday, May 21, 2003 11:16 AM
Black process 45.0° 100.0 LPI
/