Air Lift AirCell 52202 Installation guide
- Type
- Installation guide
For maximum effectiveness and safety,
please read these instructions completely
before proceeding with installation.
Failure to read these instructions can result in an
incorrect installation.
INSTALLATION GUIDE
Kit 52202
GM 2500-3500
Rear application
TOOLS LIST
Item Part # Description................................Qty
..................................................
..................................
...............................
................................
..........................................
.........................................
...............................
..................
................................
....................
HARDWARE LIST
Important Safety Notice
and do not exceed the maximum load
listed for your vehicle.
Gross Vehicle Weight Rating: The
maximum allowable weight of the fully
with other weight limits, as well as tire,
Payload: The combined, maximum
allowable weight of cargo and
Installation Diagram
g. 2
NOTE: Use
the slot in the
spring cup to
center AirCell
over the axle
strike pad.
pad area
Description ..............................................Qty
................................................
......................................................
.................................
Metric and standard wrenches .............................
.................................................................
Front
A
E
G
F
H
I
D
G
D
B or C
OPTIONAL NOTE:
To increase the
loaded vehicle height,
add the optional
cup spacer
g. 1
NOTE: Apply
the engagement
installation
AirCell
Installing the AirCell System
ASSEMBLING AND ATTACHING THE SYSTEM
of the vehicle until the suspension is fully extended.
The brackets are right and left hand specic and are marked with an L or and R for left and right hand
installation. The slotted mounting hole goes to the rear of the vehicle. Torque the mounting bolts to 31 ft/
lbs.
Applying grease or soap around the engagement ange of the spring (A) will help in aiding the spring (A)
to “snap” into the spring cup (E).
You can adjust the loaded height of the vehicle by adding the optional cup spacer between the cup and
the bracket. It will be necessary to use the longer hardware provided to install the cup spacer (see g 1
note).
NOTE
OPTIONAL
NOTE
AirCell
AIR LIFT SYSTEMS
SUSPENSION SYSTEMS
-
1
-
2
-
3
Air Lift AirCell 52202 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Air Lift 93204 Installation guide
-
-
-
-
-
Air Lift 59544 Installation guide
-
-
-
-
Other documents
-
Trust 1.8m USB 2.0 Datasheet
-
Mares XR Harness and Wing Systems Owner's manual
-
Garmin NavTalk® Pilot Installation guide
-
Burster 8523 Owner's manual
-
-
Aircast Airselect Elite Patient Manual
-
-
-
-
