ESAB LHK 250 is a thyristor-controlled, mains voltage compensated welding rectifier designed for manual and TIG welding. Suitable for use with manual welding rods, including basic types. Excellent striking and welding characteristics, dynamic characteristics give a smooth and spatter-free arc, and an easily controlled molten pool. Also ideal for TIG welding, low minimum current (8 A) enables welding of very thin materials. Has disconnect switch on the front panel for starting surge.
ESAB LHK 250 is a thyristor-controlled, mains voltage compensated welding rectifier designed for manual and TIG welding. Suitable for use with manual welding rods, including basic types. Excellent striking and welding characteristics, dynamic characteristics give a smooth and spatter-free arc, and an easily controlled molten pool. Also ideal for TIG welding, low minimum current (8 A) enables welding of very thin materials. Has disconnect switch on the front panel for starting surge.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
ESAB LHK 250 is a thyristor-controlled, mains voltage compensated welding rectifier designed for manual and TIG welding. Suitable for use with manual welding rods, including basic types. Excellent striking and welding characteristics, dynamic characteristics give a smooth and spatter-free arc, and an easily controlled molten pool. Also ideal for TIG welding, low minimum current (8 A) enables welding of very thin materials. Has disconnect switch on the front panel for starting surge.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
