Campbell Scientific IRGASON Owner's manual

Campbell Scientific, Inc. | 815 W 1800 N | Logan, UT 84321-1784 | (435) 227-9000 | www.campbellsci.com

IRGASON Packing Information

The IRGASON components are placed in a foam cutout that helps protect them from damage during shipment. The

IRGASON should look like the following image. After unpacking, it is recommended to save the foam cutout as the

IRGASON components should be placed in the foam cutout whenever the IRGASON is transported to another location.

6-Plate Solar

Radiation Shield

EC100 Enclosure

Mounting

Leveling Kit

Foam Cutout and Components

in Lower Level of Packaging

IRGASON Sensor Head

Certificate of Conformance and

EC Training Course Voucher

EC100 Electronics

with Enclosure

IRGASON Sensor Head Cable

Temperature Probe, 10 ft

USB Cable

Foam Cutout and Components

in Upper Level of Packaging