11
Using the control pad
Connect the appliance to an electrical outlet. To switch on,
push the center button for at least 2 seconds. To move the
cursor on the screen, push the respective arrow.
To confirm your selection, press the center button
.
To return to the previous screen, press t .
In order to prevent an unintended change of settings, the
control pad is provided with an automatic lock feature. When
the control pad is locked and you try to press any button, the
symbol appears on the screen. To unlock the control pad,
press the center button for at least 1 second.
Before first use
Select your language and the operation mode:
Using the q p arrows, select your language and confirm.
Select
ü
and confirm.
Next, select one of the operation modes: SensoCare or
Manual Mode, then confirm.
A SensoCare
In SensoCare mode, intelligent sensor technology enables
continuous temperature adaptation according to the specific
needs of your hair type. The styling temperature is not shown
on the display, but continuously optimized based on your hair
profile. This feature prevents hair damage caused by high
styling temperatures.
Set your profile / first use
To set your profile, go through the hair length, thickness and
coloration screens and select according to your hair type.
Confirm each setting with the center button and save your
settings by selecting a profile name (e.g. Profile 1). Confirm
and select «Continue» if you want to use your profile right
away.
The flashing thermometer symbol shows that the appliance
is heating up. Once the thermometer symbol stops flashing,
the optimum styling temperature is reached and you can start
styling.
Next use
Once a profile has been saved (e.g. Profile 1), the screen will
show it right after switching on the next time. Just confirm and
the appliance starts heating up.
Edit profiles
You can add new profiles or delete existing profiles. Up to
3 profiles can be saved.
You can modify your profile (e.g. if your hair length or colour
have changed).
Reset All
If you want to reset all settings (language and all profiles)
choose «Reset All» on the «Delete Profile» screen.
B Manual Mode
Manual Mode allows you to select the styling temperature.
This temperature will remain the same throughout the styling
process since the sensor-based automatic temperature
adaptation is deactivated in manual mode.
Move the cursor to «Manual Mode» and confirm. The default
temperature setting of 160 °C is displayed. Using the q p
arrows, you may change the temperature setting in a range
from 120 to 200 °C. While the appliance heats up, the temper-
ature screen flashes. When the flashing stops, the selected
temperature is reached and you can start styling.
Recommended temperature settings
Hair structure Coloured
hair
fine normal strong
120 °C - 150 °C 140 °C - 180 °C 170 °C - 200 °C up to 180 °C
96317479_ST780_S6-108.indd 1196317479_ST780_S6-108.indd 11 11.03.13 13:3111.03.13 13:31