•InstallationandConnection
1. How to make a network cable CAT5/5E/6 Follow the standard of IEEE-568B꞉
1. white and orange; 2. orange; 3. white and green;
4. blue; 5. white and blue; 6. green;
DVD
HDMI IN
HDMIDisplay
Cable HDMI Cable
IR
IR
Transmitter Receiver
2. Connection
3. Connection instruction
1)ConnectsourcedevicetoTransmitterunit(),anddisplaydevicetoTX
Receiverunit(cablesHDMI)viaRX
2)ConnectTransmitterunit()vianetworkRX)andReceiverunit(TX
cables(6)CAT5eorCAT5,CAT
3)Plugthepowersuppliesintothedevicestogetstarted.
4.IRUserGuide
1)IRblasterextensioncableshouldplugintheIROUTportof
TX(Transmitter)unitofHDMIextender,andtheIRreceiver
extensioncableshouldplugintheIRINportoftheRX(Receiver)unit.
7. white and brown; 8. brown.
• Specification
PowerSupply
Voltage/Current
Power consumption
DC5V/1A
TX꞉2W RX꞉<2W
HDCP1.4
HDMI compliance HDMI1.3
HDCP compliance
HDMI
Performance
And Interface
Supports audio formats PCM
Maximum transfer rate 10.2Gbps
Input and output DDC signal 5Vp-p(TTL)
Input and output TMDS signal 0.5~1.5Vp-p(TMDS)
Input cable length ≤8m(AWG24)
Output cable length ≤8m(AWG24)
HDMI resolution
Electrostatic protection
of the whole machine
1acontactdischargelevel3,1bair
dischargelevel3,implementationofthe
standard꞉IEC61000‑4‑2
Protection
Level
Working temperature 0~60℃
Storage temperature -10~70℃
Humidity (no condensation) 0~90%
Material Aluminium alloy material + crystal panel
Operating
Environment
Dimension
Treatmentprocess Grit blast
Color Black
Weight
Body
Properties
69.57(L)x58.80(W)x16.10(H)mm
TX꞉70g, RX꞉70g
CAT5
CAT5E 100m
80m
120m
CAT6
720x576@50Hz,720x480@60Hz,
1280x720@60Hz,1920x1080@60Hz,
640x480@60Hz,800x600@60Hz,
1024x768@60Hz,1280x800@60Hz,
1280x1024@60Hz,1440x900@60Hz,
1680x1050@60Hz
Q꞉Noimageoutput?
A꞉1)Checkandmakesureallcablesareconnectedwell;
2)RestarttheTX/RXbyRESETbutton.
Q꞉RXLINKindicatorisflashingallthetime
A꞉1)Makesurenetworkcableconnectionfollowsthestandard
ofIEEE568B
2)CheckwhethertransmitterhasHDMIsignalinput
3)Resettransmitterandreceiverandreconnect.
Q꞉Receiver"LINK"ledlightsonallthetimebutnoimageoutput?
A꞉1)MakesurethemonitorsupportsthecurrentHDMIsignalmode;
2)MakesureHDMIcableiswellconnectedwithTV
3)Makesurethenetworkcableisfinecopperwires.
•FAQ
2)TheemitterofIRblastershouldascloseaspossibletotheIR
receiverwindowofthesignalsourcedevice.
3)UsingtheIRremotecontrollerofthesignalsourcedevicetowards
theIRreceiver(connectedtotheRX),toremotecontrolsource
mediaplayback.
Theproductnameandbrandnamemayberegisteredtrademarkof
relatedmanufactures.™and® may be omittedontheusermanual.
Thepicturesinthisusermanualarejustforreference.ThetermsHDMI,
HDMIHigh‑DefinitionMultimediaInterface,andtheHDMILogoare
trademarksorregisteredtrademarksofHDMILicensingAdministrator,Inc.
Wereservetherightstomakechangeswithoutfurthernoticetoaproduct
orsystemdescribedhereintoimprovereliability,functionordesign.
Disclaimer