Enwork Supreme Desk Top Convenience Module Operating instructions

  • Hello! I've reviewed the operating instructions for the ENWORK Power Module PDSDTM. It's a device with 2 protected outlets, 3 smart USB ports, and wireless charging. I'm ready to assist with any questions you might have about its features and use.
  • What type of power outlet is required?
    What is the maximum USB output?
    What is the wireless charging output?
    What is the length of the power cord?
OPERATING INSTRUCTIONS
SUPREME POWER MODULE
Part number: PDSDTM
Before operating:
Please ensure that the total power rating of the devices you are charging is lower than the power rating of this unit.
Unplug if power cord becomes hot. Avoid touching sockets and plugs with wet hands. Do not disassemble the product.
Keep unit away from children, pets, water, and sources of heat.
Usage Instructions:
Connect the power base to a grounded (three-pronged) power outlet. Connect a USB cable to one of the smart outlets,
or connect an AC adapter to a protected outlet, or place a Qi-certied device on the stand and allow it to touch the
‘wireless charge’ area of the power base.
User Advice:
This power base is not a toy. It must be situated on a at, stable surface. It should also be placed in a location where it
cannot be knocked over or present a hazard. The product is for indoor use only.
Technical Specications:
Item Number: PDSTM
Protected Outlets: 2
Smart USB outlets: 3
USB Output: DC 5V 3.0A Max
Wireless charging: DC 5V, 1A / 5W
Power Rating: 125V~, 15A, 1875W, 50 / 60Hz
Power Surge Protection: 300 Joules
Power cord: 5 feet (1.5 meters)
LED indicator: ‘Ground ok’
Specications subject to change without prior notice. While supplies last
Rev 04.2020
1.800.815.7251
www.enwork.com
/