Lenco XBB-050 Owner's manual

Lenco
Brand
Lenco
Model
XBB-050
Category
Speaker sets
Type
Owner's manual
SET UP INSTRUCTIONS
Do not insert the AC power plug into the wall outlet until all
connections are made.
1. Connect the satellite link cables with the signal output port at
the back board of the Subwoofer.
2. Insert one end of the signal input cable into the “output”
port of audio player, then connect another end with “input”
port at the back of the subwoofer cabinet.
3. Plug the connector for power.
PLACEMENT OF SPEAKERS
All stereo information is heard from the satellite speakers.
The subwoofer contains no stereo information and sound is non-
directional. As a result, the subwoofer does not necessarily have
to be placed in any particular relationship to the satellites.
Placing the subwoofer on the floor close to a wall or corner of a
room provides maximum bass efficiency.
XBB-050
XBB-050
2.1 multimedia subwoofer system
DESCRIPTION
Welcome to the extraordinary world of LENCO high fidelity
sound, The XBB-050 is an amplified speaker system featuring a
subwoofer for extended low frequency response.
The system is especially designed for multimedia computer near
field monitoring.
The satellite speakers are magnetically shielded to prevent color
distortion on video displays.
When the system is not used with a computer, it can serve as an
amplified speaker system for CD/cassette/Mp3 players and vari-
ous video/audio sources with excellent results.
KOMT MET EEN LICHTGEWICHT
FEATURES HIGHLIGHT
UNIQUE AMPLIFIER CIRCUIT DESIGN
• Ensure crisp, clear and full-bodied audio with extended reflec
tive bass
PORTED SUBWOOFER
• Feel the exceptional low frequency bass from a 4”front–firing,
long-throw woofer with a ferrite magnet set in a solidly-built
wooden cabinetHIGH
PERFORMANCE 3” full range DRIVERS
• Delivers smooth mid and full frequency response.
DISTINCTIVE, ALL-DECOR STYLING
• Polyurethane High Luster finish decor looks smart in any room
of your home.
SPECIFICATIONS
Output Power(RMS) : 15W+5Wx2
Frequency response : 30Hz-18kHz
Function : Bass, Treble, Volume,Mp3&Auxinput
Input Sensitivity : >10k Ohms
Input Impedance : 4 Ohm
S/N. Ratio : ? 75dB
Satellite speaker : 3”(full range)
Subwoofer speaker : 4”long-throw woofer
Power supply : AC220V-240V/50Hz
SAFETY INSTRUCTIONS
Location
•The system must be placed at a location that does not inter-
feres with it’sproper ventilation
Heat
• It should be kept away from heat sources such as radiators,
stoves and other heat generating devices including amplifiers.
Power sources
• Should be connected to AC220V-240V/50Hz power line.
Power cord protection
•Make surethe power cordis not on the way and be damaged
by accidentally stepping on it. Pay particular attention to
cords at plugs, convinience receptacles and the point where
they exit from the appliance.
Cleaning
• The system should be cleaned only with a soft dry cloth. Never
clean it with polishing cloth.
Non-Use periods
• The power cord should be unplugged from the outlet when
left unused for a long period of time.
INSTALLATIE-INSTRUCTIES
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Lenco XBB-050 Owner's manual

Lenco
Brand
Lenco
Model
XBB-050
Category
Speaker sets
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents