2. Black Box
  3. IC400A-R2

Black Box IC400A-R2 Quick start guide

  • Hello! I have reviewed the Quick Start Guide for the Black Box IC400A-R2 USB Extender. This document explains how to extend USB signals up to 328 feet using CAT5e/6/7 cabling. It provides instructions on connecting the local and remote units, and attaching USB devices. I am ready to answer your questions about this device and its setup.
  • What type of cable is needed for the connection?
    What is the maximum distance the USB signal can be extended?
    What should I do before using the device?
Order toll-free in the U.S. or for FREE 24/7 Technical Support: Call 877-877-BBOX
(outside U.S. call 724-746-5500)
www.blackbox.com • info@blackbox.com
Contact
Information
February 2010
MT1000A-85-R4
Break the 16-foot (5-m) USB distance barrier.
This transmitter/receiver pair extends USB
up to 328 feet (100 meters) from a computer
over CAT5e/6/7 cabling.
4-Port CAT5e/6/7 USB 2.0 Extenders Quick Start Guide
IC400A-R2
Before you get started, make sure that all the drivers required for your USB device(s) are installed.
1. Place the units where you want them and connect the CAT5e/6/7 cabling to the Link ports (RJ-45) on the local and remote
units.
LinkModeConfig ModeConfig
Maximum 328 feet (100 m)
(CAT5e/6/7 cable not included)
IC400A-R2
remote unit
IC400A-R2
local unit
FREE, live, 24/7 Tech Support is just 60 seconds away.
877-877-2269 | blackbox.com
© Copyright 2016. All rights reserved.
2. Connect the local unit to the computer.
IC400A-R2
local unit
PC
3. Connect the remote unit to the AC adapter.
IC400A-R2 remote unit
AC adapter
4. Attach the USB device(s) to the remote unit.
IC400A-R2 remote unit
USB
device
NOTE: If grounding the USB extenders is required, refer to the user manual on blackbox.com. To download the manual, enter IC400A-R2 in the
search box, then click on IC400A-R2 in the product results page. Then click on the Support tab and select the IC400A-R2 user manual
to download.
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners
/