2. Toro
  3. 48in Tooth Bar, TX 1300 Compact Tool Carrier
48in Tooth Bar, TX 1300 Compact Tool Carrier

Toro 48in Tooth Bar, TX 1300 Compact Tool Carrier Installation guide

  • Hello! I've reviewed the installation instructions for the TORO Tooth Bar 147-2455. This document covers the installation process, how to replace the teeth and how to tighten the tooth bar. It includes steps for securing the tooth bar with fasteners and replacing the roll pin. I’m ready to assist you with any questions about the installation or maintenance of this device.
  • How do I install the tooth bar?
    How do I replace a damaged tooth?
    What to do if the tooth bar becomes loose?
FormNo.3454-132RevA
48inToothBar
TX1300CompactToolCarrierwithBucket
ModelNo.147-2455
InstallationInstructions
InstallingtheToothBar
Slidethetoothbaroverthebucketcuttingedgeand
secureitasshown.Ensureallfastenersaretight.
g388730
Figure1
1.Nut(2)3.Bolt(2)
2.Washer(4)4.Toothbar
TighteningtheToothBar
Ifthetoothbarbecomesloose,loosenthefasteners,
pushthetoothbarontothebucketuntilitistight,and
tightenthefasteners.
ReplacingaDamaged
Tooth
Inspecttheteethregularly;replacedanywornor
damagedtooth.
1.Usingahammerandpunch,removetherollpin
securingthetooth.
2.Removethetoothandslideonanewtooth.
Secureitwitharollpin.
g388731
Figure2
©2022—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3454-132*
/