Pipe Decor 370 PD36SBRGN2 , 370 PD36SBBBN2 , 370 PD36SBSCN2 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Pipe Decor 370 PD36SBRGN2 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
36” SHELVES WITH STRAIGHT BRACKETS (2 SHELVES)
NEED HELP OR ADVICE ON PUTTING THIS KIT TOGETHER? MISSING PIECES?
EMAIL US AT [email protected] FOR ANY QUESTIONS
# 37036SBBBN2, 37036SBRGN2, 37036SBSCN2
ID: 29085
PART DESCRIPTION QTY
A CAP 4
B FLANGES 4
C 8” NIPPLE 4
D 36” WOOD SHELF 2
E 1 3/4” SCREWS & WALL ANCHORS 16
• Place flange against wall in desired location and mark holes with pencil
• Using stud finder, locate and mark wall stud if found
A) If a wall stud is present, attach flange to wall with included screws
b) If no wall stud is present:
Drill pilot holes in wall using ¼” drill bit
Insert anchor fully into pilot hole using hammer and Phillips screwdriver as needed
Attach flange to wall using included screws
CLEAN AND CARE
PIPE DECOR's Noir pipes and fittings do not need to be cleaned and sealed. They are prefinished in a process that causes the
matte black color to permeate each piece for a deep tone that lasts a lifetime.
Maintaining your Noir decor is easy. If pieces are dusty or dirty, gently wipe them down with a dry towel. Stubborn marks can
be removed by spot-cleaning with a damp cloth.
D: 36” WOOD SHELF
A
BC
E
PII3702436SBN — 202101
/