2. D+H
  3. OT-Schelle

D+H OT-Schelle Operating instructions

  • Hello! I have reviewed the mounting instructions for the D+H OT-clamp for ZA-OT drives. This document explains how to limit the stroke of the ZA-OT drive using the clamp. It also outlines the mounting process, the product guarantee, and important safety notes. I'm ready to answer any questions you might have about this document or the OT-clamp.
  • What is the purpose of the OT-clamp?
    How do you mount the OT-clamp?
    How long is the guarantee for D+H products?
99.950.24 1.2/01/03
D+H Mechatronic AG • Georg-Sasse-Str. 28-32 • D-22949 Ammersbek • Tel. +49 40-605 65 219 • Fax +49 40-605 65 264
Mounting instructions
OT-clamp for ZA-OT drives
Application
By using an OT-clamp the stroke of ZA-OT
(rack and pinion drive without tube) can be
limited without any technical changes at the
drive.
Mounting instructions: simply put on and
screw up the OT-clamp on the rack at the
desired position.
Safety Notes
Attention! Danger of violent pressure.
Do not use the OT-clamp in a hand-
accessible area.
Guarantee
You will get 2 years guarantee for all D+H
products from date of verified handing over
of the system up to maximal 3 years after
date of delivery, when mounting and starting
has been carried out by a D+H authorized
distributor.
D+H guarantee is expired, with connection
of D+H components with external systems
or with mixing of D+H products with parts of
other manufacturers.
/