Moto Shade 131955 Operating instructions

Please reference all warnings and precautions discussed in the

Assembly Instruction Manual that came with the canopy.

IMPORTANT Please read carefully

STEP 1 Wall Panels

WALL & ENTRY PANEL

Installation Instructions

Attach Wall panels (A & B) to canopy frame by

inserting the loop cord end of Elastic Ball strap

through upper grommetted hole in wall panel.

Pull cord until ball end of strap is tight against

the grommet. Then wrap strap around frame

pole and loop back around the ball end.

Continue process for ALL upper grommet holes.

STEP 2 Entry & End Panels

Secure both End panel and Entry panel in the

same fashion as step 1. Beginning with the

middle grommet holes and working downwards,

complete both sides of the frame.

A small step ladder will assist you with the upper

portions of both the End and Entry panels.

Wall panel - long (A & B)

End panel w/ zipper entry (C)

End panel (D)

Elastic Ball straps x 24