LifeGear 97085M Owner's manual

XERXES PRO PROGRAMMABLE

MOTORIZED TREADMILL

ITEM NO: 97085M

OWNER’S MANUAL

IMPORTANT: Read all instructions carefully before using this product. Retain this

owner’s manual for future reference.

The specifications of this product may vary from this photo and are subject to change

without prior notice. 2022, Dec.

Bluetooth FitShow App Kinomap App

1

TABLE OF CONTENTS

WARRANTY -------------------------------------------------------------------------------- 2

IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3

PARTS LIST -------------------------------------------------------------------------------- 5

HARDWARE LIST ------------------------------------------------------------------------ 7

ASSEMBLY COMPONENTS ----------------------------------------------------------- 8

TOOLS --------------------------------------------------------------------------------------- 8

LUBRICANT INCLUDED ---------------------------------------------------------------- 8

EXPLODED VIEW ------------------------------------------------------------------------ 9

ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 10

LIFTING UP THE TREADMILL -------------------------------------------------------- 20

SETTING DOWN THE TREADMILL ------------------------------------------------- 21

MOVING THE TREADMILL ------------------------------------------------------------ 22

OPERATING THE COMPUTER ------------------------------------------------------ 23

COMPATIBLE FITNESS APPLICATION -------------------------------------------- 28

CARE, MAINTENANCE & TROUBLESHOOTING GUIDE -------------------- 34

BELT ADJUSTMENT -------------------------------------------------------------------- 35

LUBRICATION ----------------------------------------------------------------------------- 36

EMERGENCY STOP -------------------------------------------------------------------- 36

HOW TO USE ------------------------------------------------------------------------------ 37

WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 38

2

ONE YEAR LIMITED WARRANTY

LifeGear Inc. warrants to the original purchaser that this product is free from defects in

material and workmanship when used for the purpose intended, under the conditions that

it has been installed and operated in accordance with LifeGear's Owner's Manual.

LifeGear's obligation under this warranty is limited to replacing or repairing free of charge,

any parts which may prove to be defective under normal home use. This warranty does

not include any damage caused by improper operation, misuse or commercial application.

From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.

This warranty is offered only to the original owner and is not transferable. Proof of

purchase is required.

When ordering replacement parts please have the following information ready:

1. Owner's Manual

2. Model Number

3. Description of Parts

4. Part Number

5. Date of Purchase

3

IMPORTANT SAFETY INSTRUCTIONS

Basic precautions, including the following important safety instructions should always be

followed when using this treadmill. Read all instructions before using this treadmill.

DANGER: To reduce the risk of electric shock, always unplug the treadmill

from the electrical outlet immediately after using and before cleaning, assembling, or

servicing the treadmill.

Failure to follow these instructions may lead to personal injury and cause damage

to the treadmill.

WARNING: To reduce the risk of burns, fire, electric shock or injury to any

persons, please read the following:

 Never leave the treadmill unattended while plugged in. Disconnect by turning off the

master power switch and unplugging from wall outlet when not in use and before

putting on or taking off parts.

 Use this product only for its intended use as described in this manual. Do not use

attachments not recommended by the manufacturer.

 Never operate the treadmill if it has a damaged cord or plug, or if it is not working

properly. If it has been dropped or damaged, or been exposed to water, return the

product to a service center for examination and repair.

 Do not attempt any maintenance or adjustments other than those described in this

manual. Should any problems arise, discontinue use and consult an Authorised

Service Representative.

 Never operate the product with the air openings blocked. Keep the air openings

free of lint, hair, and other obstructions.

 Do not use the treadmill outdoors.

 Do not pull the treadmill by its power cord or use the cord as a handle.

 Keep children and pets away from the equipment while in use.

 Elderly or disabled users should only use this treadmill in the presence of an adult

who can provide assistance if required.

 Do not operate where aerosol (spray) products are being used or where oxygen is

being administered.

 Keep dry - do not operate in a wet or moist condition.

 The motor cover can become hot while the treadmill is in use. Do not place the

treadmill on a blanket or other flammable surface as this can create a fire hazard.

 Keep electrical cord away from heated surfaces.

 Keep the treadmill on a solid, level surface with a minimum safety area clearance

of two meters around the treadmill. Be sure the area around the treadmill remains

clear of any obstructions during use.

 This treadmill is for domestic household use only.

 Only one person should use the treadmill at a time.

 Wear comfortable and suitable clothing when using the treadmill. Do not use the

treadmill barefoot or in socks. Always wear appropriate athletic footwear. Never

wear loose or baggy clothing as it can become caught on the treadmill and create an

entrapment hazard.

4

 Always hold on to the handrails while using the treadmill.

 Always make sure the storage latch is in place when folding and moving the treadmill.

 Do not leave children who are under 12 years-old unsupervised near or on the

treadmill.

 To disconnect, turn all controls to the off position, then remove plug from the wall

outlet.

 This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

 Children should not be allowed to play on or near the treadmill at any time.

 CAUTION - RISK OF INJURY TO PERSONS - To avoid injury, use extreme caution

when stepping onto or off of a moving treadmill belt. Carefully read this instruction

manual before use.

 Maximum Weight Capacity is 120 kg.

 Pull out the Safety Tether Key for emergency stop.

 This unit must be plugged into a nominal 220 volt 50/60Hz outlet which has been

grounded.

 Keep hands clear of all moving parts. Never place hands or feet under the treadmill

while in use.

 Do not use the treadmill on a carpet that is greater than 1.3 cm in height.

 Before using the treadmill, check that the belt is aligned and centered on the running

deck and all visible fasteners on the treadmill are sufficiently tightened and secure.

 Cleaning and user maintenance shall not be made by children without supervision.

 If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified persons persons in order to avoid a hazard.

 Never operate this treadmill if it is in the folded position.

 Allow the running belt to fully stop and unplug the power cord from the wall outlet

before folding up the treadmill.

 Always face towards the computer console and do not run backwards on the running

belt.

WARNING: Before beginning any exercise program consult your physician.

This is especially important for people who are over 35 years old or who have

pre-existing health problems. Read all instructions before using any fitness equipment.

Do not operate this exercise equipment without properly fitted guards, as the moving

parts can present a risk of serious injury if exposed.

CAUTION: Read all instructions carefully before operating this product. Retain

this Owner’s Manual for future reference.

5

PARTS LIST

No. Description Qty No. Description Qty

001A Vibration Control Head 1 027 Right Handlebar Support Tube 1

001B Massage Belt 1 028 Wire Grommet Ø16xØ14 3

002 Dumbbell 2 029 Right Base Cover 1

003 Vibration Control Head Support

Tube 1 030 Nylon Nut M10 6

004 Hexagon Socket Button Head Bolt

M8x16 6 031 Incline Motor 1

005 Foam Roll Ø23xØ60x130 4 032 Power Cord 1

006 Round End Cap Ø25 2 033 Motor (with Bracket) 1

007 Crossbar Ø25xT1.2x870 2 034 Spring Washer Ø8 7

008 Cross Recessed Truss Head Bolt

M6x10 4 035 Washer Ø8xØ16x1.5T 14

009 Handlebar Bracket 1 036 Belt 5P/185J 1

010 Handlebar Bracket End Cap 2 037 Power Socket 1

011 Hexagon Socket Button Head Bolt

M8x65 2 038 Cross Recessed Countersunk

Head Bolt M3x8 2

012 Curve Washer Ø8xØ19x1.5T 8 039 Power Switch 1

013 Crossbar Protective Cover 4 040 Hexagon Socket Button Head

Bolt M10x105 3

014 Left Handlebar Support Tube 1 041 Fuse Box 1

015 Hexagon Socket Button Head Bolt

M8x30 3 042 Rectangular End Cap (□30x40) 2

016 Control Cable (L=1500 mm) 1 043 Audio Cable 1

017 Wire Grommet Ø22 1 044 Foot Lock Latch Tube 1

018 Computer Console 1 045 Hexagon Socket Button Head

Bolt M8x44 1

019 Safety Tether Key 1 046 Motor Cover 1

020

Hand Pulse Sensor and Speed

Control Buttons with Wires

(L=650 mm)

1 047 Hexagon Socket Button Head

Bolt M8x55 2

021

Hand Pulse Sensor and Incline

Control Buttons with Wires

(L=650 mm)

1 048 Cross Recessed Truss Head Bolt

M5x10 13

022 Plastic Cap 4 049 Left Base Cover 1

023 Handlebar Foam Grip

Ø40xT3.0x290mm 2 050 Hexagon Socket Button Head

Bolt M12x60 2

024 Handlebar End Cap 2 051 Base Frame End Cap 2

025 Cross Recessed Pan Head

Tapping Screw ST4x50 4 052 Base Frame Foot Pad 4

026 Nylon Nut M8 (Zinc Plated) 8 053 Base Frame 1

6

PARTS LIST

No. Description Qty No. Description Qty

054 Right Transport Wheel Cap Set 1 072 Side Rail 2

055 Left Transport Wheel Cap Set 1 073 Hexagon Socket Round Head

Cap Bolt M8x45 1

056 Wheel 2 074 Front Roller Ø90xØ42xØ15x548 1

057 Hexagon Socket Button Head Bolt

M10x40 3 075 Hexagon Socket Button Head

Bolt M8x20 1

058 Incline Bracket 1 076 Hexagon Head Bolt M8x25 4

059 Rectangular End Cap (□20x40) 4 077 Pad for Motor 4

060 Main Frame 1 078 Flange Nut M8 4

061 Hexagon Socket Button Head Bolt

M8x40 2 079 Nut M5 4

062 Rear Roller Ø42xØ15x530 1 080 Power Control Board Bracket 1

063 Hexagon Socket Round Head

Cap Bolt M8x55 2 081 Cross Recessed Truss Head Bolt

M5x16 4

064 Left End Cover 1 082 Power Control Board 1

065 Right End Cover 1 083 Wire for Power Control Board

(L=180 mm) 1

066 Running Belt 1 084 Wire for Fuse Box (L=100 mm) 1

067 Shock Absorption Bumper 4 085 Cross Recessed Countersunk

Head Tapping Screws ST3x20 4

068 Deck Bumper Ø30x29.5xM6 8 086 Cross Recessed Pan Head

Screw ST3x10 8

069 Cross Recessed Countersunk

Head Bolt M6x45 8 087 Hexagon Head Bolt M8x12 3

070 Running Deck 1 088 Cross Recessed Pan Head

Tapping Screw ST4x16 6

071 Cross Recessed Truss Head Bolt

M6x16 8

7

HARDWARE LIST

(4) Hexagon Socket

Button Head Bolt

6 PCS

(8) Cross Recessed

Truss Head Bolt

4 PCS

(11) Hexagon Socket

Button Head Bolt

2 PCS

(12) Curve Washer

8 PCS

(15) Hexagon Socket

Button Head Bolt

2 PCS

(26) Nylon Nut

4 PCS

(35) Washer

4 PCS

(47) Hexagon Socket

Button Head Bolt

2 PCS

(48) Cross Recessed

Truss Head Bolt

4 PCS

(19) Safety Tether Key

1 PC

(43) Audio Cable

1 PC

8

ASSEMBLY COMPONENTS

TOOLS

LUBRICANT INCLUDED

Multi Hex Tool with Phillips Screwdriver

1 PC

6 mm Allen Wrench

1 PC

(13) Crossbar Protective Cover

4 PCS

(29) Right Base Cover

1 PC

(49) Left Base Cover

1 PC

(32) Power Cord

1 PC

Lubricant

1 PC

9

18

19

20

9

10

25

22

85

23

24

26

15

26

13

14

27

28

17

16

12

4

12

4

21

8

7

5

56

6

87

3

2

1A

12

35

26

35

85

12

4

12

4

47 35

35 47

48

40

50

40

51

29

49

48

52 52

53

55

54

56

15

26

45

44

59

57

58

57

30

59

30

42

41

39

37

38

60

61

56

61

26

26 62

63

35

63

35

65

64

40

30

31 57

33

84 83

78

77

76

34

35

80

81

79

82

74

36 75

35

73

67

68

69

71

68

71

67

70

48

46

72

66

30

1B

34

11

26

28

32

35

11

88

86

48

43

23

24

88

86

48

28

EXPLODED VIEW

10

ASSEMBLY INSTRUCTIONS

Step 1

Lift both Left and Right Handlebar Support Tubes (14, 27) up.

Step 2

It is recommended to have a second person assist with this step. One person should hold

the both Left and Right Handlebar Support Tubes (14, 27) in place while the other person

tightens the bolts. Lift both Left and Right Handlebar Support Tubes (14, 27) up and align

bolt holes. Use four Hexagon Socket Button Head Bolts (4), four Curve Washers (12), two

Hexagon Socket Button Head Bolts (47), and two Washers (35) to secure both Left and

Right Handlebar Support Tubes (14,27) onto the Base Frame (53). Semi-tighten all bolts

with the Allen Wrench provided.

NOTE: DO NOT FULLY TIGHTEN BOLTS IN STEP 2 UNTIL STEP 3 IS COMPLETED.

53

14

27

12

4

47 35

14

27

53

35 47

12

4

12 4

(4) Hexagon Socket

Button Head Bolt

4 PCS

(12) Curve Washer

4 PCS

(35) Washer

2 PCS

(47) Hexagon Socket

Button Head Bolt

2 PCS

Hardware:

11

Step 3

It is recommended to have a second person assist with this step. One person should hold

the Handlebar Bracket (9) with Computer Console (18) in place while the other person

connects the wires.

Connect the Control Cable (16) from the Right Handlebar Support Tube (27) to the wire

that comes from the Computer Console (18).

Attach the Handlebar Bracket (9) with Computer Console (18) onto the both Left/Right

Handlebar Support Tubes (14, 27) with two Hexagon Socket Button Head Bolts (4), two

Curve Washers (12), two Hexagon Socket Button Head Bolts (15), and two Nylon Nuts

(26). Tighten bolts and nylon nut with the Allen Wrench and Multi Hex Tool with Phillips

Screwdriver provided.

IMPORTANT: While attaching the Handlebar Bracket (9) with Computer Console (18) onto

the both Left/Right Handlebar Support Tubes (14, 27), make sure the wires are installed

inside the Right Handlebar Support Tube (27) and pay attention not to pinch the wires.

NOTE: PLEASE FULLY TIGHTEN BOLTS INSTALLED IN STEP 2 WITH THE ALLEN

WRENCH PROVIDED.

Hardware:

(4) Hexagon Socket

Button Head Bolt

2 PCS

(12) Curve Washer

2 PCS

(15) Hexagon Socket

Button Head Bolt

2 PCS

(26) Nylon Nut

2 PCS

26

15

26

16

12

4

14

27

18

9

12 4

9

14 12

4

16

27

18

15

26 914

12

Step 4

Attach both Right/Left Base Covers (29, 49) onto the Base Frame (53) and Left/Right

Handlebar Support Tubes (14, 27) with four Cross Recessed Truss Head Bolts (48).

Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.

Hardware:

(48) Cross Recessed

Truss Head Bolt

4 PCS

(29) Right Base Cover

1 PC

(49) Left Base Cover

1 PC

14

27

48

49

48

29

48

53

13

Step 5

Slide both Crossbar Protective Covers (13) onto each ends of the Crossbar (7).

Attach the Crossbar (7) onto both Left/Right Handlebar Support Tubes (14, 27) with two

Cross Recessed Truss Head Bolts (8). Tighten bolts with the Multi Hex Tool with Phillips

Screwdriver provided.

13

8

7

14

27

8

7

14

8

13

7

13

7

(13) Crossbar Protective Cover

2 PCS

(8) Cross Recessed

Truss Head Bolt

2 PCS

Hardware:

14

Step 6

Slide both Crossbar Protective Covers (13) onto each ends of the other Crossbar (7).

Attach the Crossbar (7) onto both Left/Right Handlebar Support Tubes (14, 27) with two

Cross Recessed Truss Head Bolts (8). Tighten bolts with the Multi Hex Tool with Phillips

Screwdriver provided.

13

8

7

14

8

14

27

7

13

7

13

(13) Crossbar Protective Cover

2 PCS

(8) Cross Recessed

Truss Head Bolt

2 PCS

Hardware:

15

Step 7

Attach the Vibration Control Head Support Tube (3) onto both Crossbars (7) with two

Hexagon Socket Button Head Bolts (11), two Curve Washers (12), two Washers (35), and

two Nylon Nuts (26). Tighten bolts and nylon nut with the Allen Wrench and Multi Hex

Tool with Phillips Screwdriver provided..

Hardware:

(11) Hexagon Socket

Button Head Bolt

2 PCS

(12) Curve Washer

2 PCS

(26) Nylon Nut

2 PCS

(35) Washer

2 PCS

3

12

35

26

11

26

35

11

7

16

Step 8

Remove three Hexagon Head Bolts (87), three Spring Washers (34), and three Washers

(35) from the Vibration Control Head (1A). Remove bolts with the Multi Hex Tool with

Phillips Screwdriver provided..

Attach the Vibration Control Head (1A) onto the top end of the Vibration Control Head

Support Tube (3) with three Hexagon Head Bolts (87), three Spring Washers (34), and

three Washers (35) that were removed. Tighten bolts with the Multi Hex Tool with Phillips

Screwdriver provided..

87

1A

35

34 3

87

1A

35

34

17

Step 9

Install the Massage Belt (1B) to the belt connectors of the Vibration Control Head (1A).

Place two Dumbbells (2) onto the dumbbell rack (83) of the Vibration Control Head

Support Tube (3) .

2

1B

1A

1B

2

3

18

Step 10

User can connect one end of Audio Cable (43) into the MP3 aux input port on the

Computer Console (18) and then connect the other end of the cable into the jack for MP3

Player / CD Player or Mobile Device. The music plays through the speakers on the

treadmill.

Place the Safety Tether Key (19) onto the Computer Console (18).

Plug the indicated end of the Power Cord (32) into the Power Socket (37) on the treadmill.

Assembly Components:

18

19

32

43

32

37

43

19

(19) Safety Tether Key

1 PC

(32) Power Cord

1 PC

(43) Audio Cable

1 PC

19

Step 11

The running belt has been adjusted to the running deck at the factory before it was

shipped. At times the running belt may get slippery during shipment. After the treadmill is

completely assembled, use the 6 mm Allen Wrench to turn the both left and right rear roller

adjustment bolts 1/4 turn clockwise before using the treadmill.

Tool:

6 mm Allen Wrench

Page is loading ...

LifeGear 97085M Owner's manual

LifeGear 97085M Owner's manual

Related papers

Other documents