Page is loading ...
ENGLISH
Quick Start Guide
Quick Start
Step 1: Turn on
Press-and-hold the power
button to turn on.
Milo greets you with its
pre-assigned name.
The first time, you’ll also hear an
interactive tutorial.
Step 2: Connect
Hold Milos near each other.
Press-and-hold the side button
on all Milos until you hear
"Connected."
Step 3: Go
You’ll notice that sound from
connected Milos is quieter when
you’re close enough to talk in person.
HI <NAME> CONNECTED
Reference
Volume Up/Down
Click – Small change
Hold – Fast change
Talk
Click – Mic mute/unmute
Hold – Manual push-to-talk
Group
Click – Roll call
Hold – Create/Join group
2x Click – Leave group
Factory Reset
Power off.
Press-and-hold Bluetooth
and Power buttons at the
same time.
Release both buttons
when the light ring blinks
(after about 5-10 sec).
Power
Click – Battery info
Hold – Power on/off
Customize (Bluetooth)
Click – Record new name
Hold – Pair Bluetooth headset (soon)
Connect with Others
Create or Join a Group
To group with others, hold Milos near
each other, and press-and-hold the
side button on each at the same time.
The light ring shows grouping
is in progress.
Release the side buttons after
you hear "Connected."
Leave a Group
To leave a group, double-click the
side button. When asked to confirm,
double-click again.
If you're in a group, you need to
leave it first to join another.
YOU LEFT
TO CONFIRM...
Stay in Contact
Group Information
Get info on your group with
a click of the side button.
Milo tells you who is in your
group and their status.
Group Connection Status
Milo keeps the group informed
when Milos go out of range.
Milos reconnect automatically
when back in range.
YOU’RE IN A GROUP WITH... ... RETURNED
... IS OUT OF REACH
Power & Battery
Battery Life
Click the power button
for battery level info.
To power down, hold the power
button for 2-3 seconds.
BATTERY’S AT 75%
Charging
Use a USB-C cable to charge from any
power adapter.
You can even use a battery pack to charge
on-the-go while using Milo.
Milo charges more quickly when turned on.
Still charging Fully charged
Success Tips
Bluetooth Headset Pairing
Most Bluetooth headsets need to be in pairing mode
before you click the Milo Bluetooth button to pair. Refer
to the pairing instructions for
your headset.
If pairing doesn’t succeed, try turning off Bluetooth on
your phone while pairing.
Attaching Milo
Milo has a magnet and securely snaps into the
included Action Clip, or one of the other Milo clips
available for purchase.
To remove Milo from its clip, simply rotate 90°,
then pull it off the clip.
Factory Reset
If your Milo behaves unexpectedly,
power down, then factory reset
(see Reference page for how to).
After a reset, you need to rejoin your group.
Others Can't Hear You?
If your group can’t hear you, check if your mic is muted.
Remember that Milo is muted after it's turned on.
Using a Headset
When using a headset, avoid putting Milo in your
pocket. Milo uses its built-in microphones for
noise reduction.
Additional Features
The Milo app gives you more features
• Choose Milo language
• Choose Milo name
• Set geographic region
• Other customization
• Milo software updates for new features
• Guide to using your Milo
• Answers to frequently asked questions
/