Nedis Digital Audio Converter User guide

Brand: Nedis

Model: Digital Audio Converter

Category: Audio converters

Type: User guide

Digital Audio Converter

Article number: ACON2507BK

Nedis BV

De Tweeling 28, 5215 MC ’s-Hertogenbosch, The Netherlands 07/20

Preface

Thank you for purchasing the Nedis ACON2507BK.

This document is the user manual and contains all the information for correct, ecient and safe

use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or

using the product.

Always store this information with the product for use in the future.

Product description

Intended use

This product is intended to convert an RCA signal into a Toslink signal or vice versa.

The product is intended for indoor use only.

The product is not intended for professional use.

Any modication of the product may have consequences for safety, warranty and proper

functioning.

Specications

Product Digital Audio Converter

Article number ACON2507BK

Power input 5.0 VDC ; 0.6 A

Conversion Toslink to RCA

User manual EN 

Supported formats DTS, DTS5.1, Dolby Digital, Dolby Digital 5.1,
PMC, AAC, MPEG-2
Supported bitrates
44.1 kHz 24-bit
48 kHz 24-bit
96 kHz 24-bit
Main parts (image A)
A
1Toslink female input
2Power indicator LED
3RCA female input
4Input selector switch
5Power port
6Toslink female output
7RCA female output
User manual EN 

8DC to USB power cable
Safety instructions
WARNING
• Ensure you have fully read and understood the instructions in this document before you install
or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective
product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualied technician for maintenance to reduce the risk
of electric shock.
• Do not expose the product to water or moisture.
• Only use the provided power cable.
Explanation of the symbols on the product or packaging
Icon Description
Electronic equipment needs to bear the CE mark in order to be marketed in
the EU. CE marking shows that a product is assessed before being placed on
the market and that it meets EU safety, health and environmental protection
requirements. CE marking is also sometimes accepted as a means of
compliance with type-approval requirements; for example, electronic
components that require type-approval and also CE marking for
electromagnetic compatibility (EMC) or low-voltage equipment.
This symbol indicates that this product should not be thrown away with other
household waste throughout the EU. To prevent possible harm to the
environment or human health by uncontrolled waste disposal, you are
responsible for recycling it so that it can promote the sustainable reuse of
raw materials. To return your used product, you can use the regular return
and collection systems or contact the store where the product was
purchased. They can recycle this product for the environment.
Installation
Check the contents of the package
User manual EN 

Check that all parts are present and that no damage is visible on the parts. If parts are missing or
damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Toslink to RCA
1. Make sure all the devices you want to connect have been switched off.
2. Plug a Toslink cable (not included) into the Toslink female input A1.
3. Plug the other end of the cable into your audio source device.
4. Plug an RCA cable (not included) into the RCA female output A7.
5. Plug the other end of the cable into your audio output device.
RCA to Toslink
1. Make sure all the devices you want to connect have been switched off.
2. Plug an RCA cable (not included) into the RCA female input A3.
3. Plug the other end of the cable into your audio source device.
4. Plug a Toslink cable (not included) into the Toslink female output A6.
5. Plug the other end of the cable into your audio output device.
Connecting the power supply
1. Plug the DC to USB power cable A8 into the power port A5.
2. Plug the other end of A8 into a USB power source or adapter.
The product switches on.
The power indicator LED A2 burns blue.
Use
1. Select the input port with the input selector switch .
2. Switch on the connected audio devices.
Maintenance
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the
surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning
the product.
Warranty
Any changes and/or modications to the product will void the warranty. We accept no liability for
damage caused by improper use of the product.
User manual EN 

This product is designed for private use (normal domestic use) only. Nedis is not responsible for
wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specications are subject to change without notice. All logos, brands and product
names are trademarks or registered trademarks of their respective owners and are hereby
recognized as such.
Disposal
This symbol indicates that this product should not be thrown away with other
household waste throughout the EU. To prevent possible harm to the
environment or human health by uncontrolled waste disposal, you are
responsible for recycling it so that it can promote the sustainable reuse of
raw materials. To return your used product, you can use the regular return
and collection systems or contact the store where the product was
purchased. They can recycle this product for the environment.
User manual EN 