2. Gill
  3. ALUMINUM CIRCLE

Gill ALUMINUM CIRCLE Operating instructions

  • Hello! I've reviewed the specification for the 370 Discus Circle. This document describes a circle consiting of four arcs. The circle is made of aluminum and features mounting holes. I'm ready to answer your questions about this product.
  • What material is the Discus Circle made of?
    How many arcs form the circle?
    Where are the mounting holes located?
WARNING: Cancer and Reproductive Harm –
For more information go to www.p65warnings.ca.gov
F
Trubolt Wedge Anchor
INSTALLATION INSTRUCTIONS
1. Using a bit whose diameter equals the anchor
diameter, drill hole to any depth exceeding the
minimum embedment. Clean hole.
2. Assemble anchor with nut and washer so that
the top of the nut is flush with the top of the
anchor. Drive anchor through material to be
fastened so that nut and washer are flush with
surface material.
3. Expand anchor by tightening nut 3 to 5 turns, or
to the specific torque requirement (see selection
chart).
htt
p
://www.itwredhead.com/trubolt
_
installation
_
instr.as
p
/