Page is loading ...
Part No. E2017NAM1A1R
SLP-WHG-EtherCAT
8th Gen Intel® Core™ Processor Core™ SoC i7/i5/i3 &
Celeron® BGA Processor Fanless Expandable Slot PC with
EtherCAT Master Controller
Quick Reference Guide
2nd Ed –12 July 2023
Copyright Notice
Copyright 2023 Avalue Technology Inc., ALL RIGHTS RESERVED.
SLP-WHG-EtherCAT
2 SLP-WHG-EtherCAT Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
3
Content
1. Getting Started ............................................................................................................ 7
1.1 Safety Precautions ................................................................................................ 7
1.2 Packing List ........................................................................................................... 7
1.3 System Specifications ........................................................................................... 8
1.4 System Overview ................................................................................................. 11
1.4.1 SLP-WHG-EtherCAT Rear View ............................................................................................... 11
1.5 System Dimensions ............................................................................................. 12
1.5.1 SLP-WHG-EtherCAT Front & Top view .................................................................................... 12
2. Hardware Configuration ........................................................................................... 13
2.1 SLP-WHG-EtherCAT connector mapping ........................................................... 15
2.1.1 Serial Port 1/2 connector (COM1/2) .......................................................................................... 15
2.1.2 Serial Port 3/4 connector (COM3/4) .......................................................................................... 15
2.2 EMX-WHLGP Overviews ..................................................................................... 16
2.2.1 EMX-WHLGP ............................................................................................................................ 16
2.3 EMX-WHLGP Jumper & Connector list ............................................................... 17
2.4 EMX-WHLGP Setting Jumpers & Connectors ..................................................... 19
2.4.1 Serial port 1/2 pin9 signal select (JCOM1-RI-RS485) .............................................................. 19
2.4.2 Serial port 1/2 pin9 signal select (JCOM2-RI-RS485) .............................................................. 19
2.4.3 LVDS Back Light power selection (JSBKL1) ............................................................................ 20
2.4.4 AT/ATX Power Mode Select (JSATX1) ..................................................................................... 20
2.4.5 Clear CMOS (JCMOS1) ............................................................................................................ 21
2.4.6 LCD Inverter connector (JBKL1) ............................................................................................... 21
2.4.7 Serial port 1 connector (COM1) ................................................................................................ 22
2.4.8 Serial port 2 connector (COM2) ................................................................................................ 22
2.4.9 General purpose I/O connector (DIO1) ..................................................................................... 23
2.4.10 SPI connector (JSPI1) ............................................................................................................... 23
2.4.11 Serial port 3-6 connector (COM3-6) .......................................................................................... 24
2.4.12 SATA Power connector (SPWR1)............................................................................................. 25
2.4.13 CPU Fan connector (JFAN1) .................................................................................................... 25
2.4.14 USB connector 1(USB1) ........................................................................................................... 26
2.4.15 USB connector 2(USB2) ........................................................................................................... 26
2.4.16 LVDS connector (LVDS1) ......................................................................................................... 27
2.4.17 Front Audio connector (FAUD1) ................................................................................................ 28
2.4.18 EC Debug (JEC_DEBUG) ......................................................................................................... 28
2.4.19 Battery connector (BAT1) .......................................................................................................... 29
2.4.20 PS/2 keyboard & mouse header (KB/MS) ................................................................................ 29
SLP-WHG-EtherCAT
4 SLP-WHG-EtherCAT Quick Reference Guide
2.4.21 Miscellaneous setting connector 1 (FPT1) ................................................................................ 30
2.4.22 Miscellaneous setting connector 2 (FPT2) ................................................................................ 30
2.4.23 LED indicator connector 1 (LED1) ............................................................................................ 31
2.4.24 LED indicator connector 2 (LED2) ............................................................................................ 31
2.4.25 LED indicator connector 3 (LED3) ............................................................................................ 32
2.4.26 Speaker connector (SPK1) ....................................................................................................... 32
2.4.27 JI2C connector (JI2C1) ............................................................................................................. 33
2.4.28 LPC connector (JLPC1) ............................................................................................................ 33
2.4.29 CPU Heatsink Heater Connector (JHT1/2/3/4/5/6) ................................................................... 34
2.4.30 LED Indicator for Heater (JHT_LED1) ...................................................................................... 34
2.4.31 Gold Finger (GF) ....................................................................................................................... 35
2.4.32 Power connector (PWR1) ......................................................................................................... 37
3.BIOS Setup .................................................................................................................... 38
3.1 Introduction .......................................................................................................... 39
3.2 Starting Setup ...................................................................................................... 39
3.3 Using Setup ......................................................................................................... 40
3.4 Getting Help......................................................................................................... 41
3.5 In Case of Problems ............................................................................................ 41
3.6 BIOS setup .......................................................................................................... 42
3.6.1 Main Menu ................................................................................................................................. 42
3.6.1.1 System Language ............................................................................................................................ 43
3.6.1.2 System Date .................................................................................................................................... 43
3.6.1.3 System Time .................................................................................................................................... 43
3.6.2 Advanced Menu ........................................................................................................................ 43
3.6.2.1 CPU Configuration ........................................................................................................................... 44
3.6.2.2 Power & Performance ...................................................................................................................... 45
3.6.2.2.1 CPU - Power Management Control.................................................................................................. 45
3.6.2.2.1.1 Config TDP Configurations .............................................................................................................. 46
3.6.2.2.2 GT - Power Management Control .................................................................................................... 48
3.6.2.3 PCH-FW Configuration .................................................................................................................... 49
3.6.2.3.1 Firmware Update Configuration ....................................................................................................... 50
3.6.2.4 Trusted Computing .......................................................................................................................... 50
3.6.2.5 ACPI Settings .................................................................................................................................. 51
3.6.2.6 IT8528 Super IO Configuration ........................................................................................................ 52
3.6.2.6.1 Serial Port 1 Configuration ............................................................................................................... 53
3.6.2.6.2 Serial Port 2 Configuration ............................................................................................................... 53
3.6.2.6.3 Serial Port 3 Configuration ............................................................................................................... 54
3.6.2.6.4 Serial Port 4 Configuration ............................................................................................................... 55
3.6.2.6.5 Serial Port 5 Configuration ............................................................................................................... 55
3.6.2.6.6 Serial Port 6 Configuration ............................................................................................................... 56
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
5
3.6.2.7 EC 8528 HW monitor ....................................................................................................................... 56
3.6.2.7.1 EC 8528 HW monitor-note ............................................................................................................... 57
3.6.2.8 S5 RTC Wake Settings .................................................................................................................... 58
3.6.2.9 Serial Port Console Redirection ....................................................................................................... 58
3.6.2.9.1 Legacy Serial Redirection Port ........................................................................................................ 59
3.6.2.10 USB Configuration ........................................................................................................................... 60
3.6.2.11 NVMe controller and Drive information ............................................................................................ 61
3.6.2.12 Network Stack Configuration ........................................................................................................... 61
3.6.3 Chipset ...................................................................................................................................... 62
3.6.3.1 System Agent (SA) Configuration .................................................................................................... 62
3.6.3.1.1 Memory Configuration ...................................................................................................................... 63
3.6.3.1.2 Graphics Configuration .................................................................................................................... 64
3.6.3.2 PCH-IO Configuration ...................................................................................................................... 65
3.6.3.2.1 PCI Express Configuration ............................................................................................................... 65
3.6.3.2.1.1 PCIe Root Port 8(LAN2-I210) .......................................................................................................... 66
3.6.3.2.1.2 PCIe Root Port 9(LAN3-I210/GF slot) .............................................................................................. 67
3.6.3.2.1.3 PCIe Root Port 10(M.2 KeyA) .......................................................................................................... 68
3.6.3.2.1.4 PCIe Root Port 11(M.2 KeyB/SATA0).............................................................................................. 69
3.6.3.2.1.5 PCIe Root Port 13(GP PCIex4) ....................................................................................................... 70
3.6.3.2.2 SATA And RST Configuration .......................................................................................................... 71
3.6.3.2.3 HD Audio Configuration ................................................................................................................... 72
3.6.3.3 Board & Panel Configuration ........................................................................................................... 72
3.6.4 Security ..................................................................................................................................... 74
3.6.4.1 Secure Boot ..................................................................................................................................... 75
4.6.4.1.1 Restore Factory Keys ...................................................................................................................... 76
4.6.4.1.2 Reset To Setup Mode ...................................................................................................................... 76
4.6.4.1.3 Key Management ............................................................................................................................. 77
3.6.5 Boot ......................................................................................................................................... 78
3.6.6 Save and Exit .......................................................................................................................... 79
3.6.6.1 Save Changes and Reset ................................................................................................................ 79
3.6.6.2 Discard Changes and Reset ............................................................................................................ 79
3.6.6.3 Restore Defaults .............................................................................................................................. 80
3.6.6.4 Launch EFI Shell from filesystem device ......................................................................................... 80
4. Drivers Installation ....................................................................................................... 81
4.1 Install Chipset Driver ........................................................................................... 82
4.2 Install VGA Driver ................................................................................................ 83
4.3 Install ME Driver .................................................................................................. 84
4.4 Install Audio Driver (For Realtek ALC888S HD Audio) ........................................ 85
4.5 Install LAN Driver ................................................................................................. 86
4.6 Install RST Driver ................................................................................................ 88
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
7
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x SLP-WHG Onboard 8th Gen Intel® Core™ SoC i7/i5/i3 & Celeron®
BGA Processor with EtherCAT Master Control Card
Other major components include the following:
— Screw kit
— Wall Mount Kit
— Accessory box
SLP-WHG-EtherCAT
8 SLP-WHG-EtherCAT Quick Reference Guide
1.3 System Specifications
System Information
Processor
Onboard 8th Gen Intel® Core™ SoC i7/i5/i3 & Celeron® BGA Processor
(Whiskey lake-U Series)
System Memory
2 x 260-pin DDR4 2133 MHz SO-DIMM socket, supports up to 32GB Max (non
ECC only)
BIOS Information
AMI uEFI BIOS 256 Mbit SPI Flash ROM
Watchdog Timer
H/W Reset, 1sec. ~ 65535sec.
H/W Status Monitor
Monitoring CPU & System Temperature and Voltage
TPM
Onboard TPM 2.0
SBC
EMX-WHLGP
Expansion
M.2
(Key-X, Size, Signal)
1 x M.2 Key-A 2230 for Wi-Fi & BT Module
1 x M.2 Key-B 3042/2242/2260/2280, support SATA 3/PCIe lll x 1/USB 2.0 and
internal SIM slot 1
PCIe (Gen X, Lanes)
1 x PCIe*1 slot
1 x PCIe*4 slot
w/EtherCAT Master Card: Compliant with PCI Express 2.0
Single-lane (X1) PCI Express (Connector: RJ45 x1)
Storage
M.2
(Key-X, Size, Signal)
1 x M.2 Key-B 3042/2242/2260/2280, support SSD (share with expansion slot)
2.5” Drive Bay
(Height)
1 x 2.5” Drive Bay (internal)
Edge I/O (Front)
USB Port
3 x USB3.1 Gen1
1 x USB Type C w/o ALT mode
COM Port
4 x RS-232
HDMI
2 x HDMI 3840 x 2160 @ 30 Hz,
1 x HDMI 2560 x 1600@ 30 Hz
Audio
Line-Out, Mic-in
LAN Port
3 x RJ-45
EtherCAT Port
1 x RJ-45 for EtherCAT
PS/2 KB & Mouse
1 x PS/2 Keyboard
1 x PS/2 Mouse
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
9
Power Button
1 x Power On/Off
Wire-Control Power
On/Off
2-Pin Terminal Block
LED Indicator
1 x HDD LED
1 x Power LED
Antenna
Optional: 2 x Wireless LAN Antenna
Display
Graphic Chipset
Intel® Processor Graphics
Resolution
HDMI :2 x 3840 x 2160 @ 30 Hz, 1x 2560 x 1600@ 30 Hz
Audio
Audio Codec
Realtek ALC888S
Ethernet
LAN Chipset
1 x Intel® I219-LM
2 x Intel® I210-IT
Power Requirement
DC Input
DC in +12V ~ +24V, wide voltage
DC Input Connector
3-Pin Terminal Block (V+. V-, GND)
Power Mode
AT/ATX (ATX is default setting)
Adapter
24V/7.5A AC/DC 180W adapter (Phoenix connector), Optional
Mechanical & Environment
Operating Temp.
5~50°C (41˚F ~ 122˚F) w/Industrial SSD and memory, ambient w/ 0.5m/s air
flow
Storage Temp.
-40°C ~ 75°C (-40 ~ 167°F)
Operating Humidity
40°C @ 95% Relative Humidity, Non-condensing
Dimension (W*L*H)
217 mm x 115 mm x 220 mm
Weight
2.6 kg (System)
3.4 kg (w/Package)
Vibration Test
Random Vibration Operation:
1. PSD: 0.03622G²/Hz, 1.5 Grms
2. operation mode
3. Test Frequency: 5-500Hz
4. Test Axis: X,Y and Z axis
5. 30 minutes per each axis
6. IEC 60068-2-64 Test: Fh
7. Storage: SSD
Sine Vibration test (Non-operation)
1 Test Acceleration : 2G
SLP-WHG-EtherCAT
10 SLP-WHG-EtherCAT Quick Reference Guide
2 Test frequency: 5~500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test Axis: X,Y and Z axis
5 Test time :10 min. each axis
6 System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Package vibration test
1. PSD: 0.026G²/Hz, 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis: X,Y and Z axis
5. 30 min. per each axis
6. IEC 60068-2-64 Test: Fh
Shock Test
1. Wave form：Half Sine waves
2. Acceleration Rate：10g for operation mode
3. Duration Time：11ms
4. No. of Shock：Z axis 300 times
5. Test Axis: Z axis
6. Operation mode
7. Reference IEC 60068-2-29 Testing procedures
Test Eb : Bump Test
Drop Test
Package drop test
1 One corner, three edges, six faces
2 ISTA 2A, IEC-60068-2-32 Test: Ed
Mounting Kit
Wall Mount Kit
Software Support
OS Information
Win10, Linux
Software Support
Certification
Information
CE/FCC Class A
In-Box Accessory
Accessory
1. 1. 24V/7.5A AC/DC 180W Adapter
2. Wall mount kit
3. 2-pin terminal block
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
11
Note: Specifications are subject to change without notice.
1.4 System Overview
1.4.1 SLP-WHG-EtherCAT Rear View
Connectors
Label
Function
Note
HDMI1/2/3
HDMI connector 1/2/3
USB3/4
USB connector 3/4
LAN1/2-3
RJ-45 Ethernet 1/2-3
COM1/2
Serial Port 1 connector
5 x 2 header, pitch 2.00mm
COM3/4
Serial Port 3-6 connector
5 x 2 header, pitch 2.00mm
KB&MS
PS/2 keyboard & mouse header
4 x 2 header, pitch 2.00mm
SLP-WHG-EtherCAT
12 SLP-WHG-EtherCAT Quick Reference Guide
PWR1
Power connector
2 x 2 wafer, pitch 4.20mm
PWR1
DC Input connector
3 x 1 wafer, pitch 5.08mm
SW1
Power Button connector
1.5 System Dimensions
1.5.1 SLP-WHG-EtherCAT Front & Top view
(Unit: mm)
SLP-WHG-EtherCAT
14 SLP-WHG-EtherCAT Quick Reference Guide
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
15
2.1 SLP-WHG-EtherCAT connector mapping
2.1.1 Serial Port 1/2 connector (COM1/2)
Pin
RS-232
RS-422
RS-485
1
DCD#
TXD422-
485DATA-
2
RXD
TXD422+
485DATA+
3
TXD
RXD422+
4
DTR#
RXD422-
5
GND
6
DSR#
7
RTS#
8
CTS#
9
RI#
2.1.2 Serial Port 3/4 connector (COM3/4)
Signal
PIN
PIN
Signal
9
NRI#
NCTS#
8
7
NRTS#
NDSR#
6
5
GND
NDTR#
4
3
NTXD
NRXD
2
1
NDCD#
SLP-WHG-EtherCAT
16 SLP-WHG-EtherCAT Quick Reference Guide
2.2 EMX-WHLGP Overviews
2.2.1 EMX-WHLGP
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
17
2.3 EMX-WHLGP Jumper & Connector list
The following tables list the function of each of the board’s jumpers and connectors.
Jumpers
Label
Function
Note
JSBKL1
LVDS Back Light power selection
3 x 1 header, pitch 2.00mm
JSATX1
AT/ATX Power Mode Select
3 x 1 header, pitch 2.54mm
JCOMS1
Clear CMOS
3 x 1 header, pitch 2.00mm
JCOM1-RI-RS485
Serial port 1/2 pin9 signal select
6 x 2 header, pitch 2.00mm
JCOM2-RI-RS486
Serial port 1/2 pin9 signal select
6 x 2 header, pitch 2.00mm
Connectors
Label
Function
Note
FPT1/2
Miscellaneous setting connector 1/2
5 x 2 header, pitch 2.54mm
SODIMM1/2
206-pin DDR4 SO-DIMM socket
FAUD1
Front Audio connector
6 x 2 header, pitch 2.00mm
JBKL1
LCD Inverter connector
5 x 1 wafer, pitch 2.00mm
JSPI1
SPI connector
4 x 2 header, pitch 2.00mm
JEC_DEBUG
EC Debug
2 x 1 header, pitch 2.00mm
COM1/2
Serial Port 1/2 connector
5 x 2 header, pitch 2.00mm
COM3-6
Serial Port 3-6 connector
20 x 2 header, pitch 2.00mm
DIO1
General purpose I/O connector
10 x 2 header, pitch 2.00mm
SPK1
Speaker connector
4 x 1 wafer, pitch 2.00mm
LVDS1
LVDS Connector
20 x 2 wafer, pitch 1.25mm
USB1/2
USB connector 1/2
5 x 2 header, pitch 2.54mm
USB3/4
USB connector 3/4
LAN1/2
RJ-45 Ethernet 1/2
LED1/2/3
LED indicator connector 1/2/3
4 x 1 header, pitch 2.00mm
M2KA1-1
M.2 2230 Key A slot
M2KB1-1
M.2 3042/2242/2260/2280 Key B Slot
JLPC
LPC connector
5 x 2 header, pitch 2.00mm
DCIN1
DC Power-in connector
PWR1
Power connector
2 x 2 wafer, pitch 4.20mm
SATA1
Serial ATA connector
SATA1 is not functioning in
EMX-SKLGP-3855 SKU
SLP-WHG-EtherCAT
18 SLP-WHG-EtherCAT Quick Reference Guide
SPWR1
SATA Power connector
4 x 1 wafer, pitch 2.54mm
JI2C1
JI2C connector
5 x 1 header, pitch 2.00mm
HDMI1/2/3
HDMI connector 1/2/3
JFAN1
CPU Fan connector
1 x 4 wafer, pitch 2.54 mm
SIM1
SIM card slot
KB/MS
PS/2 keyboard & mouse header
4 x 2 header, pitch 2.00mm
BAT1
Battery connector
2 x 1 wafer, pitch 1.25mm
JHT_LED
LED Indicator for Heater
2 x 1 header, pitch 2.54mm
JHT1/23/4/5/6
CPU Heatsink Heater Connector
2 x 1 header, pitch 2.00mm
GF
Gold Finger
Quick Reference Guide
SLP-WHG-EtherCAT Quick Reference Guide
19
2.4 EMX-WHLGP Setting Jumpers & Connectors
2.4.1 Serial port 1/2 pin9 signal select (JCOM1-RI-RS485)
* Default
Ring*
+5V
+12V
2.4.2 Serial port 1/2 pin9 signal select (JCOM2-RI-RS485)
* Default
Ring*
+5V
+12V
SLP-WHG-EtherCAT
20 SLP-WHG-EtherCAT Quick Reference Guide
2.4.3 LVDS Back Light power selection (JSBKL1)
* Default
PWM Mode*
DC Mode
2.4.4 AT/ATX Power Mode Select (JSATX1)
* Default
ATX*
AT
/
