Page is loading ...
User Manual
USER MANUAL Model No: 3586
Extendable 3.5m Window Cleaning Squeegee
Mop Wash Wipe Cleaner
USER MANUAL Model No: 3586
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
If at any time during activity, you feel faint, dizzy or experience pain, stop and consult
your physician or doctor.
Make sure all fastenings are tightly in place and that everything is in order before using
the product. This should be checked periodically by an adult.
This product is not a toy, and is only to be used for its designated purpose.
Clean only with a damp cloth. Do not use strong industrial cleaning substances.
Leaving the product outside exposed to weather, especially direct sun and rain will
speed the weathering process. This can be slowed by removing the product from these
conditions, or covering it with a suitable cover.
Be aware of your surroundings when using this product as it may be a danger for others
and the users.
Only use this product on a level surface, do not attempt to use this product on a ladder
or unstable surface.
Do not use harsh chemicals when window cleaning, only use household soaps.
If the product is damaged or has any defects, please contact cs[email protected]
This product contains small parts that could be a choking hazard if swallowed.
1.
2. Squeegee cleaning head.
3. Adjustable cleaning head fitting.
4. Extension poles.
Assembly instructions
Notice: Please read all instructions carefully before using this product
A
USER MANUAL Model No: 3586
1. Begin by taking the squeegee cleaning head (part 1) and the
adjustable cleaning head fitting (part 2). Slide the adjustable
cleaning head fitting (part 2) into the squeegee cleaning head
(part 1), making sure the end marked as A in the image above is
slid into the bottom of the squeegee cleaning head (part 1). Once
you have completed the steps the product will look like the image
on the right hand side.
1. Begin by taking the squeegee cleaning head (part 1) and the adjustable cleaning head fitting (part 2). Slide the
adjustable cleaning head fitting (part 2) into the squeegee cleaning head (part 1), making sure the end marked as A in
the image above is slid into the bottom of the squeegee cleaning head (part 1). Once you have completed the steps
the product will look like the image on the right hand side.
2. Now you have created the squeegee cleaning head, you can start adding the extension poles (part 3) to reach the
height that you need clean. To secure into place, slide in the extension poles into each other. Force may be needed to
lock into place.
3. Make sure the extension poles are flush and secure as seen.
The finished product will look like the image above. Go over the
product checking all fastenings are secure before use. Now your
product is ready to use.
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 3586
/
