Ryobi RY40190 User manual

Ce tondeuse a été conçu et fabriqué conformément à nos strictes

normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.

Correctement entretenu, cet outil vous donnera des années de

fonctionnement robuste et sans problème.

AVERTISSEMENT : Pour réduire les risques de

blessures, l’utilisateur doit lire et veiller à bien comprendre le

manuel d’utilisation avant d’employer ce produit.

Merci de votre achat.

Su podadora ha sido diseñado y fabricado de conformidad con

nuestras estrictas normas para brindar fiabilidad, facilidad de uso

y seguridad para el operador. Con el debido cuidado, le brindará

muchos años de sólido funcionamiento y sin problemas.

ADVERTENCIA: Para reducir el riesgo de lesiones,

el usuario debe leer y comprender el manual del operador antes

de usar este producto.

Le agradecemos su compra.

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

SAVE THIS MANUAL FOR FUTURE REFERENCE

Your lawn mower has been engineered and manufactured to our high standard for dependability, ease of operation, and

operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using

this product.

Thank you for your purchase.

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

20 in. 40 VOLT LAWN MOWER

20 po, TONDEUSE 40 V

20 pulg., PODADORA 40 V

RY40109

Page is loading ...

3 — English

WARNING:

READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below and on the

machine may result in electric shock, fire, and/or serious

personal injury.

READ ALL INSTRUCTIONS

This cutting machine is capable of amputating hands and

feet and throwing objects. Failure to observe all safety

instructions could result in serious injury or death.

Avoid dangerous environment - Do not use the lawn

mower in damp or wet conditions or operate in the rain.

Keep children away - Keep all bystanders, children, and

pets at least 100 ft. away. Stop machine if anyone enters

the area.

Tragic accidents can occur if the operator is not alert to

the presence of children. Children are often attracted to

the machine and the mowing activity. Never assume that

children will remain where you last saw them.

• Keep children out of the mowing area and under the

watchful care of a responsible adult other than the

operator.

• Be alert and turn mower off if a child enters the area.

• Never allow children to operate the machine.

• Use extra care when approaching blind corners, shrubs,

trees, or other objects that may block your view of a

child.

Dress properly - Wear heavy, long pants, long sleeves,

gloves, and protective footwear that will protect your

feet and improve your footing on slippery surfaces. Do

not wear loose fitting clothing, short pants, sandals, or

go barefoot. Do not wear jewelry of any kind. They can

be caught in moving parts.

Don’t overreach - Keep proper footing and balance at all

times. Overreaching can result in loss of balance.

Do not leave the mower unattended while running or with

the start key installed.

Keep hands and feet away from cutting area. Keep clear

of the discharge opening at all times.

Operate the lawn mower only in daylight or good artificial

light.

Use safety glasses - Always wear eye protection with

side shields marked to comply with ANSI Z87.1. Use face

mask if operation is dusty.

Use the right appliance - Do not use the lawn mower for

any job except that for which it is intended.

Do not force the lawn mower - It will do the job better

and safer at the rate for which it was designed.

Do not charge lawn mower in rain, or in wet locations.

Stay alert - Watch what you are doing and use common

sense when operating the lawn mower. Do not operate

the mower while tired, upset, or under the influence of

drugs, alcohol, or medication. A moment of inattention

while operating the lawn mower may result in serious

personal injury.

Maintain lawn mower with care - Keep machine in good

working condition. Keep blades sharp and guards in place

and in working order. Replace damaged or unevenly worn

blades before using mower for best performance.

Check all nuts, bolts, and screws at frequent intervals for

proper tightness to be sure the equipment is in safe work-

ing condition. Mower blades are sharp. Wrap the blade or

wear gloves, and use extra caution when servicing them.

Do not dispose of the battery in a fire. The cell may

explode. Check with local codes for possible special

disposal instructions.

Stop the motor, wait until the blade comes to a complete

stop, and remove the start key and battery pack before

cleaning the lawn mower, removing the grass catcher, or

removing the mulching plug.

 Replace blade if it is bent or cracked. An unbalanced

blade causes vibration that could damage the motor

drive unit or cause personal injury. Sharpen a dull blade

equally at each end to maintain the balance. Clean the

blade thoroughly and check its balance by supporting

it horizontally on a thin nail through its center hole. The

nail should be in a horizontal position. If either end of

the blade rotates downward, remove some metal from

the heavy of lower end until the blade is balanced. It is

balanced when neither end drops.

Always use safety protective devices. Do not operate the

mower without the entire grass catcher, mulching plug

and rear discharge door in place and working properly.

Do not open or mutilate the battery. Released electrolyte

is corrosive and may cause damage to the eyes or skin.

It may be toxic if swallowed.

Follow manufacturer’s instructions for proper operation

and installation of accessories. Only use accessories

approved by the manufacturer.

Exercise care in handling batteries in order not to short the

battery with conducting materials such as rings, bracelets,

and keys. The battery or conductor may overheat and

cause burns.

Clear the work area before each use. Remove all objects

such as rocks, tree nuts, sticks, metal, wire, bones, toys,

or other objects which can be thrown by the blade.Stay

behind the handle when the motor is running.

Avoid holes, ruts, bumps, rocks, property stakes, or other

hidden objects. Uneven terrain could cause a slip and fall

accident.

Do not mow near drop-offs, ditches, or embankments.

IMPORTANT SAFETY INSTRUCTIONS

4 — English

IMPORTANT SAFETY INSTRUCTIONS

Mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on

slopes.

Plan your mowing pattern to avoid discharge of material

toward roads, sidewalks, bystanders and the like. Also,

avoid discharging material against a wall or obstruction,

which may cause the material to ricochet back toward

the operator.

Do not mow on wet grass or excessively steep slopes.

Poor footing could cause a slip and fall accident. Walk,

never run.

Use extra care when approaching blind corners, shrubs,

trees, or other objects that may block your view.

Do not pull the mower backward unless absolutely nec-

essary. If you must back the mower away from a wall or

obstruction, first look down and behind to avoid tripping

or pulling the mower over your feet.

Never direct discharged material toward anyone. Avoid

discharging material against a wall or obstruction. Material

may ricochet back toward the operator. Stop the blade

when crossing gravel surfaces.

Objects struck by the lawn mower blade can cause severe

injuries to persons. The lawn should always be carefully

examined and cleared of all objects prior to each mowing.

If the lawn mower strikes a foreign object, follow these

steps:

• Stop the lawn mower by releasing the blade control

lever, wait until the blade comes to a complete stop,

and then remove start key.

• Thoroughly inspect the mower for any damage.

• Replace the blade if it is damaged in any way. Repair

any damage before restarting and continuing to operate

the mower.

Stop the motor, wait until the blade comes to a complete

stop, and remove start key before unclogging the chute.

The cutting blade continues to rotate for a few seconds

after the motor is shut off. Never place any part of the

body in the blade area until you are sure the blade has

stopped rotating.

If the mower should start to vibrate abnormally, stop the

motor, remove the start key, and check immediately for

the cause. Replace the blade if it is unevenly worn or

damaged in any way. Vibration is generally a warning of

trouble.

Service on the product must be performed by qualified

repair personnel only. Service or maintenance performed

by unqualified personnel could result in injury to the user

or damage to the product.

The grass catcher assembly is subject to deterioration

and wear and should be checked each time the mower is

used. If replacement is needed, make sure the new grass

catcher meets original manufacturer’s recommendations

and specifications.

Use only authorized replacement parts when servicing

the product. Use identical replacement blades only. Use

of unauthorized parts may create a risk of serious injury

to the user, or damage to the product.

Maintain or replace safety instructions labels, as neces-

sary.

Disconnect battery and remove start key. Disconnect

battery pack and remove start key from the appliance

before storing, servicing, or changing accessories such

as blades. Such preventive safety measures reduce the

risk of starting the tool accidentally.

Stop the unit and disconnect battery pack and start key

when not in use. Carry or push the unit with the motor

stopped and the start key removed from the mower.

Battery tools do not have to be plugged into an electrical

outlet; therefore, they are always in operating condition.

Be aware of possible hazards when not using your bat-

tery tool or when changing accessories. Following this

rule will reduce the risk of electric shock, fire, or serious

personal injury.

 Do not use battery-operated appliance in rain.

 Remove or disconnect battery before servicing, cleaning

or removing material from the gardening appliance.

For use with 40 V lithium-ion battery packs. See Tool/

Appliance/Battery Pack/Charger Correlation Supplement

988000-842.

 Store idle lawn mower indoors - When not in use, mower

should be stored indoors in a dry, locked place out of the

reach of children. The start key and battery packs should

also be removed and stored in a separate location out of

the reach of children.

Follow instructions for lubricating and changing

accessories.

Only allow responsible adults, who are familiar with the

instructions, to operate this machine.

Never operate machine in a closed area.

Never tamper with safety devices. Check for proper op-

eration regularly.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this product. If

you loan someone this tool, loan them these instructions

also.

5 — English

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION

Safety Alert Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand

operator’s manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply

with ANSI Z87.1.

Wet Conditions Alert Do not expose to rain or use in damp locations.

Electric Shock

Failure to use in dry conditions and to observe safe practices can

result in electric shock.

Keep Hands and Feet Away Keep hands and feet away from blade and cutting area.

No Reach Do not reach hands or feet under mower deck.

MAX 15˚

No Slope

Do not operate on inclines greater than 15º. Mow across the face

of slopes, never up and down.

Keep Children and

Bystanders Away

Keep all children and bystanders at least 100 ft. away.

Ricochet

Thrown objects can ricochet and result in personal injury or prop-

erty damage.

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER:

Indicates a hazardous situation, which, if not avoided, will result in death or

serious injury.

WARNING:

Indicates a hazardous situation, which, if not avoided, could result in death or

serious injury.

CAUTION:

Indicates a hazardous situation, that, if not avoided, may result in minor or

moderate injury.

NOTICE:

(Without Safety Alert Symbol) Indicates information considered important, but

not related to a potential injury (e.g. messages relating to property damage).

SYMBOLS

6 — English

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION

Recycle Symbols

This product uses lithium-ion (Li-ion) batteries. Local, state, or

federal laws may prohibit disposal of batteries in ordinary trash.

Consult your local waste authority for information regarding

available recycling and/or disposal options.

Direct Current Type or a characteristic of current

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

hrs Hours Time

SYMBOLS

PRODUCT SPECIFICATIONS

Motor ...................................................................................................................................................................... 40 Volt DC

Deck Size ....................................................................................................................................................................... 20 in.

Height Adjustments ................................................................................................................................. 1-1/2 in. to 3-3/4 in.

Wheel Size ..............................................................................................................................................8 in. front, 10 in. rear

FEATURES

KNOW YOUR LAWN MOWER

See Figure 1.

The safe use of this product requires an understanding of

the information on the product and in this operator’s manual

as well as a knowledge of the project you are attempting.

Before use of this product, familiarize yourself with all op-

erating features and safety rules.

BATTERY COVER

The battery cover protects the battery port from moisture

and debris.

BATTERY STORAGE COMPARTMENT

The battery storage compartment offers a convenient place

for storing your battery or to store an extra battery pack.

CRUISE CONTROL

The cruise control button allows you to set the speed of the

mower to accommodate your pace when the self-propelled

feature is engaged.

GRASS CATCHER

The grass catcher collects grass clippings and prevents

them from being discharged across your lawn as you mow.

HEIGHT ADJUSTMENT LEVER

The height adjustment lever provides cutting height

adjustments.

7 — English

UNPACKING

This product requires assembly.

 Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing list

are included.

WARNING:

Do not use this product if any parts on the Packing List

are already assembled to your product when you unpack

it. Parts on this list are not assembled to the product by

the manufacturer and require customer installation. Use

of a product that may have been improperly assembled

could result in serious personal injury.

 Inspect the product carefully to make sure no breakage

or damage occurred during shipping.

 Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

 If any parts are damaged or missing, please call

1-800-860-4050 for assistance.

PACKING LIST

Lawn Mower

Start key

Grass Catcher

Mulching Plug

Mulching Blade

Operator’s Manual

WARNING:

If any parts are damaged or missing, do not operate this

product until the parts are replaced. Use of this product

with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create acces-

sories not recommended for use with this product. Any

such alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

WARNING:

Do not insert start key or battery pack until assembly is

complete and you are ready to mow. Failure to comply

could result in accidental starting and possible serious

personal injury.

WARNING:

To prevent accidental starting, do not make any adjust-

ments or installations with the start key or battery pack

inserted. Accidental starting of the mower during assem-

bly could result in serious personal injury.

FEATURES

LED HEADLIGHTS

LED headlights are located on the front of the unit to illumi-

nate your path in low light conditions. The lights will operate

continuously whenever the motor is running.

NOTE: If the the start button is pressed or the bail is

squeezed and released, the headlights will illuminate for

sixty seconds.

MULCHING PLUG

Your mower is equipped with a mulching plug that covers

the rear discharge opening, which allows the mower blade

to cut and recut for finer clippings.

SELF-PROPELLED FEATURE

Pulling the levers upward to meet the handle turns on the

self-propelled feature of your mower.

START BUTTON AND BAIL

The start button and bail are located on the upper handle of

the mower. Engage the bail then depress the start button to

start the motor. Release the bail to stop the motor.

START KEY

The start key must be inserted before the mower can be

started.

ASSEMBLY

8 — English

ASSEMBLY

WARNING:

Never operate the mower without the proper safety de-

vices in place and working. Never operate the mower with

damaged safety devices. Operating the mower with miss-

ing or damaged parts can result in serious personal injury.

UNFOLDING AND ADJUSTING THE HANDLE

ASSEMBLY

See Figures 2 - 3.

NOTICE:

Do not allow the starter cable to become pinched or

trapped when raising the handle.

To raise the lower handle:

 Pull the handle adjustment knobs out and rotate

90 degrees.

 Raisethelowerhandle.Avoidpinchingortrappingany

cables.

 Rotate the knob 90 degrees again to secure handle in

place.

To raise the upper handle:

 Open the handle lock clips.

 Fully extend the upper handle.

 Close the handle lock clips to secure the upper handle

in place. Avoid pinching or trapping any cables.

ASSEMBLING AND INSTALLING THE GRASS

CATCHER (FOR REAR BAGGING OPERATION)

See Figures 4 - 7.

The mower comes with the bagging blade installed. It is de-

signed to propel the clippings deeper into the grass catcher,

preventing build-up at the front of the catcher and resulting in

less frequent emptying. This blade design is more efficient for

bagging, but may slightly reduce the run time of the battery.

NOTE: When using the grass catcher, do not install the

mulching plug.

 Remove start key and battery pack.

 Attach bottom clip of the bag by placing the edge of the

clip over the bottom rail of the frame as shown.

 Attach the three remaining clips on each side of the bag

by using the same procedure.

 Lift the rear discharge door.

 Lift the grass catcher by its handle and place under the

rear discharge door so that the hooks on the grass catcher

are seated onto the slots on the mower housing.

 Release the rear discharge door.

 Reinstall start key and battery pack when you are ready

to mow.

INSTALLING THE MULCHING PLUG

(FOR MULCHING OPERATION)

See Figure 8.

The mower comes with the bagging blade installed. For best

results when mulching, install the included mulching blade.

See Replacing the Cutting Blade in the Maintenance sec-

tion of this manual.

NOTE: When using the mulching plug, do not install the

grass catcher.

 Remove start key and battery pack.

 Lift and hold the rear discharge door.

 Grasp the mulching plug by its handle and insert it at a

slight angle, as shown.

 Push the mulching plug securely into place.

 Lower the rear discharge door.

 Reinstall start key and battery pack when you are ready

to mow.

SETTING BLADE HEIGHT

See Figure 9.

When shipped, the blade on the mower is set to a low- cutting

position. Before using the mower for the first time, raise the

cutting position to the height best suited for your lawn. The

average lawn should be between 1-1/2 in. to 2 in. during cool

months and between 2 in. and 3-1/4 in. during hot months.

To adjust the blade height:

 Remove start key and battery pack.

 To raise the blade height, grasp the height adjustment

lever and move it toward the back of the mower.

 To lower the blade height, grasp the height adjustment

lever and move it toward the front of the mower.

 Reinstall start key and battery pack when you are ready

to mow.

9 — English

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this product. The use of

attachments or accessories not recommended can result

in serious personal injury.

WARNING:

Always inspect mower for missing or damaged parts

and blade for damage, uneven, or excessive wear prior

to use. Use of the mower with damaged or missing parts

can result in serious personal injury.

WARNING:

Always remove battery packs and start key from your tool

when you are assembling parts, making adjustments,

cleaning, or when not in use. Following these instructions

will prevent accidental starting that could cause serious

personal injury.

WARNING:

Before each use, inspect the entire product for damaged,

missing, or loose parts such as screws, nuts, bolts, caps,

etc. Tighten securely all fasteners and caps and do not

operate this product until all missing or damaged parts

are replaced. Please contact customer service or a quali-

fied service center for assistance.

This product will accept RYOBI 40V lithium-ion battery

packs only.

For complete charging instructions, refer to the Operator’s

Manuals for your RYOBI battery pack and charger models.

APPLICATIONS

You may use this product for the purpose listed below:

Mowing your lawn

WARNING:

With the exception of using the self-propelled feature to

relocate the mower to the mowing site, always remove

battery packs and start key when moving or transporting

the mower to avoid accidental starting that could result

in serious personal injury.

INSTALLING/REMOVING BATTERY PACK

See Figure 10.

 Raise the battery cover.

 Align raised ribs on battery pack with grooves in the bat-

tery port and install the battery pack into the mower.

WARNING:

Make sure the latch on the bottom of the battery pack

snaps in place and the battery pack is fully seated and

secure in the mower’s battery port before beginning op-

eration. Failure to securely seat the battery pack could

cause the battery pack to fall out, resulting in serious

personal injury.

 Lower the battery cover.

To remove battery pack:

 Raise the battery cover.

 Press and hold the battery latch button at the bottom of

the battery pack.

 Remove battery pack from the mower.

WARNING:

To avoid accidental starting that could result in serious

personal injury, always remove the start key when moving

or transporting the mower.

NOTE: The battery storage compartment offers a convenient

place for storing your battery, or to store an extra battery

pack. The unit cannot be powered by the battery while it

is installed in the battery storage compartment; it must be

moved to the battery port in order to power the unit from

the battery port.

STARTING/STOPPING THE MOWER

See Figures 10 - 12.

Raise the battery cover.

Install battery pack into the battery port.

Insert the start key into the slot beside the battery storage

compartment.

Lower the battery cover.

Raise the handle assembly as described earlier.

NOTE: The mower will not start if the handle assembly

is not in the operating position.

OPERATION

10 — English

Pull the bail toward the handle. Press and release the

start button to start the mower.

To stop the mower, release the bail.

SELF-PROPELLED MOWING

See Figure 12.

WARNING:

Never engage the blades when transporting the mower

from one location to another. Only engage the blades by

pressing the start button when you are ready to mow.

Failure to follow these instructions can result in serious

personal injury.

Once the mower has been started, the self-propelled

feature is engaged by pulling one or both of the levers

upward to meet the handle.

To disengage the self-propelled feature, release the levers.

NOTE: The self-propelled levers can be used without

engaging the blade to power the mower from one location

to another. You must pull the bail and then one or both

levers to move the mower without engaging the blade.

CRUISE CONTROL

See Figure 12

WARNING:

Always adjust the cruise control before you engage the

blade. Adjusting the cruise control while mowing may

cause you to lose control and could result in serious injury

while the blade is operating.

WARNING:

When using the self-propelled feature, ensure that the

cruise control is set at a speed that you can comfort-

ably follow when walking behind the mower. You may

lose control of the mower if the cruise control is set at

a speed that is too fast for your walking pace. Release

the self-propel levers and bail if you cannot keep up

with the mower and adjust the cruise control as needed.

Failure to follow these instructions can result in serious

personal injury.

By sliding the cruise control button on the handle, you can

adjust the speed of the mower to accommodate your pace

when the self-propelled feature is engaged.

MOWING TIPS

WARNING:

Do not mow on wet grass, which can cause you to slip

and fall and result in possible serious personal injury.

OPERATION

Make sure the lawn is clear of stones, tree nuts, sticks,

wires, and other objects that could damage the lawn mower

blades or motor. Do not mow over property stakes or other

metal posts. Such objects could damage the blade or be

accidentally thrown by the mower in any direction and

cause serious personal injury to the operator and others.

For a healthy lawn, always cut off one-third or less of the

total length of the grass.

When cutting heavy grass, reduce walking speed to allow

for more effective cutting and a proper discharge of the

clippings.

Do not cut wet grass. It will stick to the underside of the

deck and prevent proper bagging or mulching of grass

clippings.

New or thick grass may require a narrower cut or a higher

cutting height.

Clean the underside of the mower deck after each use

to remove grass clippings, leaves, dirt, and any other

accumulated debris.

NOTE: Always stop mower, allow blades to completely

stop, remove the start key and remove the battery pack

from the battery port before cleaning underneath the

mower.

SLOPE OPERATION

See Figure 13.

WARNING:

Slopes are a major factor related to slip and fall accidents

that can result in severe injury. Operation on slopes re-

quires extra caution. If you feel uneasy on a slope, do not

mow it. For your safety, do not attempt to mow slopes

greater than 15 degrees.

Mow across the face of slopes, not up and down. Exercise

extreme caution when changing direction on slopes.

Watch for holes, ruts, rocks, hidden objects, or bumps

which can cause you to slip or trip. Tall grass can hide

obstacles. Remove all objects such as rocks, tree limbs,

etc., which could be tripped over or thrown by the blade.

Always be sure of your footing. A slip and fall can cause

serious personal injury. If you feel you are losing your bal-

ance, release the upper blade control lever immediately.

Do not mow near drop-offs, ditches, or embankments;

you could lose your footing or balance.

EMPTYING THE GRASS CATCHER

See Figure 14.

 Stop the mower and allow blades to completely stop.

 Open battery cover.

 Remove start key and battery pack from the battery port.

 Lift the rear discharge door.

11 — English

WARNING:

Before performing any maintenance, make sure the

mower battery and key are removed to avoid accidental

starting and possible serious personal injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

When servicing, use only authorized replacement parts.

Use of any other parts can create a hazard or cause

product damage.

NOTICE:

Before each use, inspect the entire product for damaged,

missing, or loose parts such as screws, nuts, bolts, caps,

etc. Tighten securely all fasteners and caps and do not

operate this product until all missing or damaged parts

are replaced. Please contact customer service or a quali-

fied service center for assistance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken, or

destroy plastic which can result in serious personal injury.

Remove any build-up of grass and leaves on or around the

motor cover. Wipe the mower clean with a dry cloth occa-

sionally. Do not use water.

OPERATION

MAINTENANCE

LUBRICATION

All of the bearings in this product are lubricated with a suf-

ficient amount of high grade lubricant for the life of the unit

under normal operating conditions. Therefore, no further

bearing lubrication is required.

WARNING:

Always protect hands by wearing heavy gloves and/or

wrapping the cutting edges of the blade with rags and

other material when performing blade maintenance. Con-

tact with the blade could result in serious personal injury.

REPLACING THE CUTTING BLADE

See Figures 15 - 16.

NOTE: Only use authorized replacement blades.

Stop the motor and remove the start key. Allow blade to

come to a complete stop.

 Remove the battery pack from the battery port.

Turn the mower on its side.

Wedge a block of wood between the blade and mower

deck to prevent the blade from turning.

Loosen the blade nut by turning it counterclockwise (as

viewed from bottom of mower) using a 15 mm wrench

or socket (not provided).

Remove the blade nut, spacer, blade insulator, and blade.

Place the new blade on the shaft against the blade posts.

Ensure blade is properly seated with shaft going through

center blade hole and the two blade posts inserted into

their respective holes on the blade. Make sure it is installed

with the curved ends pointing up toward the mower deck

and not down toward the ground. When seated properly,

the blade should be flat against the blade posts.

Replace the blade insulator and spacer, then thread the

blade nut on the shaft and finger tighten.

NOTE: Make certain all parts are replaced in the exact

order in which they were removed.

Torque the blade nut down clockwise using a torque

wrench (not provided) to ensure the bolt is properly

tightened. The recommended torque for the blade nut is

310 – 360 in.lbs.

 Lift the grass catcher by its handle to remove from mower.

 Empty grass clippings.

 Lift the rear discharge door and reinstall the grass catcher

as described earlier in this manual.

 Reinstall start key and battery pack when you are ready

to mow.

12 — English

MAINTENANCE

WARNING:

Ensure blade is properly seated and the blade nut is

tightened to the torque specifications above. Failure to

properly attach the blade could cause it to come loose

and result in possible serious personal injury.

STORING THE MOWER

See Figures 17 - 18.

WARNING:

Remove all battery packs from the battery port and bat-

tery storage compartment and start key and store in a

secure location out of the reach of children to prevent

unauthorized use of the lawn mower and possible seri-

ous personal injury.

Before storage, wipe any dirt or debris from the battery

area.

Turn mower on its side and clean grass clippings that

have accumulated on the underside of the mower deck.

Wipe the mower clean with a dry cloth.

Check all nuts, bolts, knobs, screws, fasteners, etc., for

tightness.

Inspect moving parts for damage, breakage, and wear.

Have repairs made on any damaged or missing parts.

Check blade for damage, uneven, or excessive wear and

replace blade if these conditions exist.

Store mower indoors in a clean, dry place out of the reach

of children.

• To store the mower in a horizontal position, lower the

handle assembly. Avoid pinching or trapping any cables.

• To store the mower in a vertical position, remove the

grass bag, then lower the handle assembly. Avoid

pinching or trapping any cables.

NOTE: Make sure the pins on the handle adjustment knobs

are fully locked before attempting to raise the mower to

the standing position.

NOTICE:

Do not allow the starter cable to become pinched or

trapped when lowering the handle.

Do not store near corrosive materials such as fertilizer or

rock salt.

13 — English

TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.

PROBLEM POSSIBLE CAUSE SOLUTION

Handle not in position. Handle adjustment knobs and/or handle

lock clips are not secured.

Make sure handle adjustment knobs

are fully seated and handle lock clips

are fully closed.

Mower not starting. Battery is low in charge.

Start key not installed.

Handle assembly is not in operating

position.

Charge the battery.

Install start key.

Raise lower and upper handle.

Mower cutting grass unevenly. Lawn is rough or cutting height not set

properly.

Adjust the cutting height.

Mower not mulching properly. Wet grass clippings sticking to the un-

derside of the deck.

Wait until the grass dries before mowing.

Mower hard to push. High grass, rear of mower housing and

blade dragging in heavy grass, or cut-

ting height too low.

Raise cutting height.

Mower not bagging properly. Cutting height set too low. Raise cutting height.

Mower vibrating at higher speed. Blade is unbalanced, excessively or

unevenly worn.

Bent motor shaft.

Replace the blade.

Stop the motor, remove start key and

battery. Inspect for damage. Have re-

paired by an authorized service center

before restarting.

Motor stops while cutting. Cutting height set too low. Raise the cutting height.

MAKE THE MOST OF YOUR PURCHASE!

Go to http://register.ryobitools.com and register your new tool on-line.

Your product has been fully tested prior to shipment

to ensure your complete satisfaction.

For any questions about operating or maintaining

your product, call the Ryobi Help Line!

14 — English

WARRANTY

LIMITED WARRANTY STATEMENT

Techtronic Industries North America, Inc., warrants to the

original retail purchaser that this RYOBI® brand outdoor

product is free from defect in material and workmanship

and agrees to repair or replace, at Techtronic Industries

North America, Inc.’s, discretion, any defective product

free of charge within these time periods from the date of

purchase.

 Five years if the product is used for personal, family or

household use;

 90 days, if used for any other purpose, such as

commercial or rental.

This warranty extends to the original retail purchaser only

and commences on the date of the original retail purchase.

Any part of this product found in the reasonable judgment

of Techtronic Industries North America, Inc. to be defective

in material or workmanship will be repaired or replaced

without charge for parts and labor by an authorized service

center for RYOBI® brand outdoor products (Authorized

Ryobi Service Center).

The product, including any defective part, must be returned

to an authorized Ryobi service center within the warranty

period. The expense of delivering the product to the service

center for warranty work and the expense of returning it

back to the owner after repair or replacement will be paid

by the owner. Techtronic Industries North America, Inc.’s,

responsibility in respect to claims is limited to making the

required repairs or replacements and no claim of breach of

warranty shall be cause for cancellation or rescission of the

contract of sale of any RYOBI® brand outdoor product. Proof

of purchase will be required by the dealer to substantiate

any warranty claim. All warranty work must be performed

by an authorized service dealer.

This warranty is limited to ninety (90) days from the date

of original retail purchase for any RYOBI® brand outdoor

product that is used for rental or commercial purposes, or

any other income-producing purpose.

This warranty does not cover any product that has been

subject to misuse, neglect, negligence, or accident, or that

has been operated in any way contrary to the operating

instructions as specified in this operator’s manual. This

warranty does not apply to any damage to the product that

is the result of improper maintenance or to any product

that has been altered or modified. The warranty does not

extend to repairs made necessary by normal wear or by the

use of parts or accessories which are either incompatible

with the RYOBI® brand outdoor product or adversely affect

its operation, performance, or durability. In addition, this

warranty does not cover:

A. Tune-ups – Spark Plugs, Carburetor, Carburetor

Adjustments, Ignition, Filters

B. Wear items – Bump Knobs, Outer Spools, Cutting

Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive

Belts, Tines, Felt Washers, Hitch Pins, Mulching Blades,

Blower Fans, Blower and Vacuum Tubes, Vacuum Bag

and Straps, Guide Bars, Saw Chains

C. This warranty does not cover the battery for more than

three years from date of purchase.

Techtronic Industries North America, Inc., reserves the

right to change or improve the design of any RYOBI® brand

outdoor product without assuming any obligation to modify

any product previously manufactured.

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION

TO THE STATED WARRANTY PERIOD. ACCORDINGLY,

ANY SUCH IMPLIED WARRANTIES INCLUDING

MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN

THEIR ENTIRETY AFTER THE EXPIRATION OF THE

APPROPRIATE FIVE-YEAR OR NINETY-DAY WARRANTY

PERIOD. TECHTRONIC INDUSTRIES NORTH AMERICA,

INC.’S, OBLIGATION UNDER THIS WARRANTY IS

STRICTLY AND EXCLUSIVELY LIMITED TO THE

REPAIR OR REPLACEMENT OF DEFECTIVE PARTS

AND TECHTRONIC INDUSTRIES NORTH AMERICA,

INC., DOES NOT ASSUME OR AUTHORIZE ANYONE

TO ASSUME FOR THEM ANY OTHER OBLIGATION.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC

INDUSTRIES NORTH AMERICA, INC., ASSUMES NO

RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,

OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED

TO, EXPENSE OF RETURNING THE PRODUCT TO AN

AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE

OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S

TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,

RENTAL OF A LIKE PRODUCT DURING THE TIME

WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,

LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS

OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS

OF TIME, OR INCONVENIENCE. SOME STATES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

This warranty applies to all RYOBI® brand outdoor products

manufactured by or for Techtronic Industries North America,

Inc., and sold in the United States and Canada.

To locate your nearest Authorized Ryobi Service Center,

dial 1-800-860-4050.

Page is loading ...

Ryobi RY40190 User manual

This manual is also suitable for

Ryobi RY40190 User manual

in other languages

Related papers

Other documents