Renkforce RF-3388964 Owner's manual

Brand: Renkforce

Model: RF-3388964

Category: Coffee making accessories

Type: Owner's manual

The Renkforce RF-3388964 LED Strobe Light is a versatile device that can be utilized for various purposes. With its ability to generate regular short flashes of light in two different frequencies (7.62 Hz and 24.75 Hz), it finds applications in signaling systems, creating light effects, and indicating operational statuses. Suitable for both indoor and outdoor use (IP65 rated), this device can be easily mounted using screws and features a 160 mm cable for convenient installation. The package includes two "Fire" and two "Alarm" stickers for customization.

Page is loading ...

• Maintenance,modicationsand repairs are tobeperformed exclusively byan

expertorataqualiedshop.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

• Attention, LED light:

- Do not look directly into the LED light!

- Do not look into the beam directly or with optical instruments!

Assembly

• TheLEDstrobelightcangenerateashesoflightattwodifferentashrates;dependingon

theconnection,theashfrequencyis7.62Hzor24.75Hz:

Flash frequency 7.62 Hz

Black wire GND/negative terminal (-)

Red wire positive terminal (+): 12 - 24 V/DC

Flash frequency 24.75 Hz

Black wire GND/negative terminal (-)

Yellow wire positive terminal (+): 12 - 24 V/DC

 Ifonlyneedoneashrateisrequired,insulatetheunusedwire(e.g.withshrink

tubing).

 Dependingonthedesiredfunction,itispossibletoswitchbetweentheashrates

(e.g., using an external switch, etc.).

• Depending on the surface, the LED strobe light must be secured with two suitable screws,

and wall plugs if necessary. However, before this, a large enough opening for the connecting

cable is needed.

Protect the connecting cables from short-circuit. When installing the product outdoors,

make sure that moisture cannot penetrate the cable connections (e.g. screw connections,

terminals).

Take care not to damage any existing electrical wiring, gas or water pipes, when you

are drilling holes or the tightening screws.

• Switch on the mains voltage and check that the LED strobe light is working.

Care and cleaning

• The product does not require maintenance. The LED bulb is permanently installed and

cannot be replaced.

• Only the outer surface of the LED strobe light should be wiped using a clean, soft, dry cloth.

• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as

they can cause damage to the housing and malfunctioning.

• Do not press too hard on the housing, as scratches might appear.

• Dust can easily be removed using a clean, soft brush and a vacuum cleaner.

• Do not immerse the product in water.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste. At the end of its service life, dispose of the product according to

the relevant statutory regulations.

 You thus full your statutory obligations and contribute to the protection of the

environment.

Technical data

Operating voltage ......................... 12 - 24 V/DC

Power consumption ...................... max. 120 mA

Lamp ............................................. LED, not replaceable

Protection class ............................ IP65

Flash frequency ............................ 7.62 Hz or 24.75 Hz (depending on connection)

Cable length ................................. approx. 160 mm

Dimensions (W x H x D) ............... 110 x 35 x 38 mm

Weight .......................................... 53 g

Operating instructions

LED Strobe Light

Item no. 1694482 (red)

Item no. 1674345 (orange)

Intended use

When connected to the operating voltage (12 -24 V/DC), the LED strobe light will generate

regularshortashesoflight(ashrateof7.62Hzand24.75Hzdependingontheconnection).

Due to this feature the LED ash light can be used e.g. for signalling in alarm systems,

generating light effects or the indication of operating conditions.

The product may be installed and used outdoors and indoors (IP65).

For safety and approval purposes, you must not rebuild and/or modify this product. If you use

the product for purposes other than those described above, the product may be damaged.

Inaddition,improperusecancausehazardssuchasshortcircuiting,re,electricshocketc.

Read the instructions carefully and keep them. Make this product available to third parties only

together with its operating instructions.

This product complies with the statutory national and European requirements. All company

Delivery content

• LED Strobe Light

• 2x stickers “Fire”

• 2x stickers “Alarm”

• Operating instructions

Latest operating instructions

Download the latest operating instructions via the link www.conrad.com/downloads or scan the

QR code shown. Follow the instructions on the website.

Explanation of symbols

An exclamation mark in a triangle indicates important instructions in this operating

manual that absolutely have to be observed.

 Thearrowsymbolindicatesspecictipsandadviceonoperation.

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information

on proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become

dangerous playing material for children.

• Protect the product fromextremetemperatures,strongjolts,ammablegases,

vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed

if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

can damage the product.

• Also observe the safety and operating instructions of any other devices which are

connected to the product.

• Do not use the product in rooms with adverse environmental conditions, where

combustible gases, vapours or dust are or may be present! There is a risk of

explosion!

• Regularashingofthelightsourcemaytriggerepilepticseizuresincertainpeople.

This may also happen to people who have never before experienced an epileptic

seizure.

• In commercial institutions, the accident prevention regulations of the Employer’s

Liability Insurance Association for Electrical Systems and Operating Facilities are

to be observed!

• Consult an expert when in doubt about operation, safety or connection of the

device.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

Allrightsincluding translation reserved. Reproduction by anymethod,e.g. photocopy,microlming, or thecapturein

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Page is loading ...

Renkforce RF-3388964 Owner's manual

Brand: Renkforce

Model: RF-3388964

Category: Coffee making accessories

Type: Owner's manual

Download PDF

report

in other languages

français: Renkforce RF-3388964 Le manuel du propriétaire
Deutsch: Renkforce RF-3388964 Bedienungsanleitung
Nederlands: Renkforce RF-3388964 de handleiding

Renkforce RF-3388964 Owner's manual

Renkforce RF-3388964 Owner's manual

in other languages

Related papers

Other documents