http://www.floorexpert.com/...eType=Installation_Products_Accessories&KBArticleName=Armstrong-Touch-Up-Kit-Product-Information[12/19/2017 10:22:28 AM]
3 S-1153 01153601 Medium Brown M230-0227
M230-0234
M230-0207
M230-0229
M231-8412
M280-0408
M280-0014
4 S-1154 01154601 Red Brown M230-9843
M230-9838
M230-0115
M231-0321
M231-9830
M280-0273
M280-0359
5 S-1155 01155601 Black/Gray/White M230-0224
M230-0358
M231-0390
M231-0503
M231-0403
M231-4416
M231-7831
M280-0224
M281-6837
Substrates
No additional information for this field.
Installation Procedures
Kit Includes:
5 Filler Sticks
2 Touch-up Markers
1 Container of Urethane - 1/2 fl. oz. (14.78mL)
1 Sanding Pad
1 Instruction Sheet
1 Armstrong Information Card
For Armstrong, Bruce and Robbins urethane hardwood flooring
To repair scratches and nicks
Preparation: Wipe damaged area with Armstrong Hardwood & Laminate Cleaner. (Not included
in kit)
Note: Deep scratches that cut into the wood may need to be sanded lightly with 100 grit
sandpaper.
Follow with 220 grit sandpaper. (Not included in kit).
Staining: Apply stain, following directions on the Touch-Up Marker. Start with the light color,
then progress to the darker color in the kit if necessary. Wipe excess using a clean (dry or damp)
cloth. (Not included in kit)
For some colors, several applications of color may be necessary to achieve desired results.
Allow stain to dry thoroughly.
Apply urethane: Apply a light, even coat, using a soft cloth. Allow to dry 30 minutes, then apply
a second coat.* Allow the second coat to dry for a minimum of four hours.* Abrade lightly with
sanding pad and wipe clean. Apply a third coat. Allow to dry 30 minutes.*
*Drying time may vary due to humidity conditions.
Filler: The Filler Stick can easily touch up nicks, chips and small scratches on Armstrong
(urethane) products. Rub Filler Stick over area to be filled. Fill gouge or crack with Filler Stick.
Substrates
Installation Procedures