CHAUVET DJ DRB-F100CM Reference guide

Page is loading ...

1

EN

QUICK REFERENCE GUIDE

DRB-F100CM QRG Rev. 1

About This Guide

The DRB-F100CM Quick Reference Guide (QRG) has basic product information such as mounting diagrams and

technical specifications.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration

.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration

.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• This product contains no user-serviceable parts.

• CAUTION: This product’s housing may be hot when attached panels are operating.

• When selecting an installation location, consider ease of access for operation and routine maintenance of attached

panels.

• Make sure to hang away from any flammable material.

• Make sure that the structure and attachment points to which you are hanging the rig bar can support the weight of

the attached panels.

• In the event of a serious operating problem, stop using immediately.

Contact

Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request

support or return a product. Refer to Contact Us

at the end of this QRG for contact information.

What is Included

• DRB-F100CM

Product Description

The DRB-F100CM is a 100 cm long Dual-Function Rig Bar in the F-Series, designed for hanging or stacking F-Series

Video Panels. Speego connectors create a secure attachment that can hang up to 1,300 lbs (590 kg), stack up to 2,000

lbs (900 kg), and work with the Ground Support 2 Kit and DRB Curve Kit from CHAUVET. Comes fitted with 2 hoist rings

that can be replaced with other mounting hardware, such as 2 inch truss clamps. The DRB-F100CM aligns with other F-

Series Rig Bars to ensure proper pixel alignment between panels.

EN

2

DRB-F100CM QRG Rev. 1

QUICK REFERENCE GUIDE

Product Overview

Product Dimensions

Removing the Hoist Ring (Optional)

To remove the hoist ring from the DRB-F100CM:

1. Remove the split pin from the pin hole in the castle nut locking the hoist ring in place.

2. Unscrew the castle nut from the hoist ring.

3. Lift the hoist ring out of the product.

4. To re-install the hoist ring, reverse the previous steps.

Warning! Replacing the hoist ring with other hardware may change the load capacity of the product!

Male Speego Connection

Female Speego Connection

Alignment Conicals

For TR16 Screw Jacks

Alignment Holes (x4) Alignment Magnets (x5)

Alignment Bolts

Top View

Side View

Bottom View

Back View

39.35 in

999.6 mm

39.55 in

1,007.4 mm

4.72 in

120 mm

2.36 in

60 mm

5.2 in

132 mm

6.65 in

169 mm

Hoist Ring Assembly Split

Castle

Nut

Hole

Hoist

Ring

!

3

EN

QUICK REFERENCE GUIDE

DRB-F100CM QRG Rev. 1

Mounting (Stacking)

Video panels can be stacked upon the DRB-F100CM for use with the Ground Support 2 Kit from CHAUVET.

Before using this product with the Ground Support 2 Kit, read the Safety Notes

, as well as those for the attached

products.

Mounting Diagram (Stacking)

Stacking Procedure

1. Insert alignment conicals into the alignment holes and allow magnets to connect.

2. Close the latches of the male speego connections on the F-series panel.

3. To detach the Rig Bar from the F-Series panel, reverse the previous steps.

Warning! The magnetic attachments are not load-bearing, and are intended for alignment assistance

only. Do not release panel until the hardware has been fully secured.

Alignment

Conical (x4)

Male Speego

Connection

Female Speego

Connection

(For use with

DRB Curve Kit or

Ground Support 2 Kit)

!

EN

4

DRB-F100CM QRG Rev. 1

QUICK REFERENCE GUIDE

Mounting (with Ground Support 2 Kit)

For more information on how to use the DRB-F100CM with the Ground Support 2 Kit, download the User Manual for the

Ground Support 2 Kit from www.chauvetprofessional.com.

Before using the DRB-F100CM with the Ground Support 2 Kit, read the Safety Notes

for every product involved.

Mounting Diagram (with Ground Support 2 Kit)

Female Speego

Connections

Male Speego

Connection

Ground Support 2 Kit

Male Speego

Connections

TR16 Screw Jack

(10 included with

Ground Support 2 Kit)

5

EN

QUICK REFERENCE GUIDE

DRB-F100CM QRG Rev. 1

Mounting (Hanging)

Before mounting this product, read the Safety Notes, as well as those for the attached products.

Mounting Diagram (Hanging)

Mounting Procedure

1. Insert alignment conicals into the alignment holes and allow magnets to connect.

2. Insert the Rig Bar Speego locking bars into the female Speego connections on the F-Series panel.

3. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.

4. Twist the tightening knob clockwise until F-Series panel is secure to the Rig Bar.

5. To detach the Rig Bar from the F-Series panel, reverse the previous steps.

Technical Specifications

Dimensions and Weight

Note: Dimensions in inches are rounded.

Ordering

Warning! The magnetic attachments are not load-bearing, and are intended for alignment assistance

only. Do not release panel until the hanging hardware has been fully secured.

Length Width Height Weight

39.35 in (999.6 mm) 2.36 in (60 mm) 4.72 in (120 mm) 20 lb (9.1 kg)

Load Capacity (Hanging) Load Capacity (Stacking) Recommended Shackles

1,300 lb (590 kg) 2,000 lb (900 kg) 1/2”, 5/8”

Product Name Item Name Item Code UPC Number

DRB-F100CM DRBF100CM 23091601 781462219499

Alignment

Conical (x4)

Male Speego

Connection

Tightening

Knob

Spring

Knob

Locking

Bar

Rig Bar Speego

Female Speego

Connection (x2)

(For use with

DRB Curve Kit)

!

Page is loading ...

Multi-Language

QUICK REFERENCE GUIDE

27

DRB-F100CM QRG Rev. 1

Contact Us

Visit the applicable website above to verify our contact information and instructions to request support. Outside the

U.S., United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.

General Information Technical Support

Chauvet World Headquarters

Address: 5200 NW 108th Ave. Voice: (844) 393-7575

Sunrise, FL 33351 Fax: (954) 756-8015

Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com

Fax: (954) 929-5560

Toll Free: (800) 762-1084 Website: www.chauvetprofessional.com

Chauvet Europe Ltd.

Address: Unit 1C Email: [email protected]

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu

NG16 6NT

Voice: +44 (0) 1773 511115

Fax: +44 (0) 1773 511110

Chauvet Europe BVBA

Address: Stokstraat 18 Email: BNLtec[email protected]

9770 Kruishoutem

Belgium Website: www.chauvetprofessional.eu

Voice: +32 9 388 93 97

Chauvet France

Address: 3, Rue Ampère

91380 Chilly-Mazarin

Email: [email protected]

France Website: www.chauvetprofessional.eu

Voice: +33 1 78 85 33 59

Chauvet Germany

Address: Bruno-Bürgel-Str. 11

28759 Bremen

Email: DEtech@chauvetlighting.de

Germany Website: www.chauvetprofessional.eu

Voice: +49 421 62 60 20

Chauvet Mexico

Address: Av. de las Partidas 34 - 3B

(Entrance by Calle 2)

Email: [email protected]

Zona Industrial Lerma Website: www.chauvetprofessional.mx

Lerma, Edo. de México, CP 52000

Voice: +52 (728) 690-2010

CHAUVET DJ DRB-F100CM Reference guide

CHAUVET DJ DRB-F100CM Reference guide

in other languages

Related papers

Other documents