R03.002_10/11/2017
TECHNICAL FILE
Novolistel® 3 chrome
Novolistel® 3 chrome nish is a versatile prole, highly
decorative, with an attractive nish. Frequently used as an
edge or countertop protector, in medium height tiled walls
or as a decorative trim. A brilliant prole, highly valued in
bathrooms and other environments. Novolistel® 3 Chrome,
distinction on the nishes.
General Features
Material: Chromed aluminum
Length: 2.5 lm / 8ft2in
Dimensions: h: 10/12mm (3/8”,1/2”)
a: 10 mm (3/8”)
Packaging: 30 u./box
Finishes:
71- chrome
Page 1 of 3
R03.002_10/11/2017
TECHNICAL FILE
Página 2 de 2
Novolistel® 5
Materials
Novolistel® 3 Chrome is a prole made by extrusion of aluminum. The aluminum is a material with
excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile, malleable and
highly durable.
This prole acquires its characteristic nish through the chrome plating process, which consists in ca-
rrying out a nickel and chrome bath on the surface. This, in addition to provide a high decorative value,
protects the prole from external damage and possible rust.
The nish of the chromed proles is highly demanded as one of the most decorative proles on the
market. The high quality nish, with mirror effect, is in line with the latest trends and complements the
highest-end ceramic.
Technical Features and tests
Corrosion resistance
Salt spray test
+250 h without surface damage
ASTM G85 / ISO 9227
Applications
Novolistel® 3 chrome is a highly decorative and versatile prole. A prole with several uses that can
be installed as a:
- Decorative listello
- Edge protector
- Countertop nish
- Medium height nish
*Chromed nishes are not recommendable for oorings
Installation
1
2
3
4
5
1. Spread a big amount of thin-set mortar on the surface where you are going to place the prole.
2. Place the prole aligned to the corner and press to make the thin-set mortar pass through the
holes on the anchoring wing.
3. Place tiles along the anchoring wing and continue pressing to achieve an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the remaining material, remove the protective lm if necessary and let dry.
Page 2 of 3
TECHNICAL FILE
R03.002_10/11/2017
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Cleaning and maintenance
It’s necessary the immediate cleaning of the material after its installation to avoid that remainings of
mortar, concrete or iron particles from wool or tool could cause corrosion.
For the cleaning you can use water with detergent or liquid soap to remove dirtiness and possible
ngerprints marked on the surface. For persistent spots you can use diluted vinegar. There are specic
cleaners in the markets for chromed pieces which preserve its appearance.
Steel wool or similar products, are not recommended because they could scratch the surface and
create pitting corrosion. Pay special attention while using materials containing chlorides, they are not
indicated because could oxidize the material. Hydrochloric acid or iron products in a long contact with
the material are neither recommended. Do not use cleaners for common steel for the cleaning of
stainless steel.
Indoors Wall tiling
Complementary pieces
Novolistel® 3 chrome has complementary pieces available, made of chromed zamak, to get a
perfect nish on the installation.
Page 3 of 3
-
1
-
2
-
3
Emac NL37138CP Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Schluter Q125TSSG Installation guide
-
Schluter E90RC100AKGB39 User manual
-
Schluter Systems A125ATGB User manual
-
Schluter QF8/50AT User manual
-
-
Schluter EV/Q45TSSG User manual
-
Schluter MC80 User manual
-
Schluter A80AGRB User manual
-
Schluter R/M150 User manual
-
Schluter AE125 Installation guide