Husky 82-974-111 Operating instructions

WARNING

This warranty excludes incidental/inconsequential damages

and failures due to misuse, abuse, normal wear and tear and

dulling of the blade(s).

Specifications

Product Overview

Designed for most sewer outlets, stack vents and storm gutters,

the Husky Encased Sewer Rod features a sturdy spear-shaped boring

head that penetrates the most stubborn clogs. It comes in a self-storing,

rust-resistant plastic case with a winding handle. It can be used to clear

clogged drains that range from 4 in. to 10 in.

Step1.

Extend the steel cable with boring head and feed into sewer drain.

Step2.

Move the cable back and forth until the clog is clear.

Step3.

Pull the steel cable out of the drain and rinse thoroughly.

Step4.

Carefully wind up the steel cable into the plastic case.

Operating Instructions

If you have any question concerning this product:

– Contact your local Homedepot Store.

– Contact 1-888-HD-HUSKY.

Instruction Sheet

Encased Sewer Rod

• Works with most sewer outlets, storm gutters and stack vents

• Sturdy boring head penetrates the most stubborn clogs

• For most sewer outlets, stack vents and storm gutters

• Use to clear 4 - 10 in. Dia lines

• Sturdy poly-tuff spear-shaped boring head

• Oil-tempered flat spring steel wire

• Self-storing, rust-resistant plastic case with a winding handle

• Safe, reliable and easy to use

• 40 ft. length steel spring (when fully extended)