KURO S - I
223.2821.000
KURO S - U
223.2823.000
KURO L - I
223.2824.000
KURO L - U
223.2826.000
GO TO WWW.BARBECOOK.COM,
REGISTER YOUR BARBECOOK AND
YOUR BARBECOOK EXPERIENCE
WILL BE FURTHER IMPROVED !
THIS IS YOUR SERIAL N°
www.barbecook.comwww.barbecook.com
[EN] Go to barbecook.com, register your Barbecook and your Barbecook experience
will be further improved!
[NL] Ga naar barbecook.com, registreer uw Barbecook om uw Barbecook-ervaring
nog meer te verbeteren!
[FR] Rendez-vous sur barbecook.c om et enregistrez votre appareil Barbecook pour
nous aider à améliorer votre expérience Barbecook.
[DE] Registrieren Sie Ihren Barbecook auf barbecook.com, damit Sie ein noch
umfangreicheres Barbecook-Erlebnis genießen können!
EN - User guide ................................................. .3
NL - Gebruiksaanwijzing .....................................5
FR - Mode d’emploi........................................... ..7
DE – Bedienungsanleitung .................................9
www.barbecook.com 2
EN - USER GUIDE
1 REGISTER YOUR APPLIANCE
Thank you for purchasing a Barbecook appliance! We are sure it
will bring you lots of happy moments.
To optimize your experience, register your appliance at
www.barbecook.com . It takes only a few minutes and yields
some major benefits:
• You get access to our personalized after sales service. This
allows you, for example, to quickly find spare parts for your
appliance or to profit from an optimal warranty service.
• We can inform you about interesting product updates and
direct you to the product information and specifications that
are relevant for your appliance.
For more information about registering your appliance,
refer to www.barbecook.com
Barbecook respects your privacy. Your data will not be
sold, distributed or shared with third parties.
2 IMPORTANT SAFETY
INSTRUCTIONS
2.1 Read and follow the instructions
Read the instructions before using the appliance. Always follow
the instructions carefully. Assembling or using the appliance
differently can cause fires and material damage.
Damages caused by not following the instructions
(improper assembly, misuse, inadequate maintenance...)
are not covered by the warranty.
2.2 Use your common sense
Use your common sense when working with the appliance:
• Do not leave the appliance unattended when in use.
• Warning! The appliance will become very hot, do not move it
during operation.
• Use appropriate protection when handling hot parts.
• Keep flammable materials, flammable liquids and dissoluble
objects away from an appliance in use.
• Warning! Keep children and pets away from an appliance in
use.
• Keep a bucket of water or sand at hand when using the
appliance, especially on very hot days and in dry areas.
•
•
Warning! Do not use indoors.
2.3 Select an appropriate location
Use the appliance outdoors only. Using it indoors, even in a
garage or shed, can cause carbon monoxide poisoning.
When selecting an outdoor location, always:
•
•
Make sure the appliance is not under an overhanging
structure (a porch, a shelter...) or under foliage.
• Put the appliance on a firm and stable surface. Never put it
on a moving vehicle (a boat, a trailer...).
3 ASSEMBLING THE APPLIANCE
3.1 Safety instructions
•
Do not modify the appliance when assembling it. It is very
dangerous and not allowed to alter parts of the appliance.
•
Always follow the assembly instructions carefully.
•
•
•
The user is responsible for the correct assembly of the
appliance. Damages caused by improper assembly are not
covered by the warranty.
Remove all securing components including labels, plastic
security elements and protective film ect. prior to assembly
and first use of the fireplace. Assembly must be performed
by two adults in accordance with the instructions in 3.2.
Failure to comply with the warnings, cautions and
recommandations intended to prevent hazards listed
in this instruction may result in fire, explosion severe
bodily injury, ill health, dead or damage to property.
Note : Use only wood or charcoal in the fireplace. Do not
load more than 3 kilograms of permitted material into the
fireplace. Failure to comply with this recommandation will
cause the combustion chamber (walls of the fireplace) to
burn out sooner and will permanently remove the corrosion
protective coating. In extreme circumstances it may result
in a permanent deformation of the fireplace structure!
Never touch or lean on the fireplace or place objects at the
bottom of the structure. Failure to comply with this
instruction may lead to severe bodily injury, death or property
damage.
NOTE : Emty the ashtray only after the fireplace
has cooled down completely and use gloves to avoid burns.
The combustion chamber is made of steel and may expand
when exposed to high temperatures. Constant temperature
fluctuations may, under certain conditions, lead to micro
cracks or warps in the walls. These are not defects and do
not adversely affect the stability and performance ofb the
structure. All corrosion spots which may appear in the
combustion chamber will become oxidised as long as the
fireplace is used regularly.
NOTE : It is recommended to place the fireplace on a flat and
even surface to ensure proper operation. Failure to comply
with this recommendation will cause irregular operation of
the structure during combustion which will result in
excessive heat load being applied to certain sections of the
walls. Irregular operation of the device will accelerate the
burn-up or result in discoloration of the heat-resistant paint
in some places and appearance of the corrosion spots. In
extreme circumstances, it may lead to deformation of the
fireplace structure.
The fireplace has special openings in its base which are
designed to ensure stability and user safety. It is
recommended to perform assembly with help of a
professional.
Never allow the base of the structure to contact with water.
Permanent accumulation of moisture on the fireplace
surface will cause corrosion spots to appear.
The foundation must be even and smooth. In case the
fireplace is intended to be placed on a terrace or a
similar location, the place needs to be first inspected
by a professional to identify whether it can carry the
load.
If the fireplace is placed near a building, at least a 10 cm gap
must be left between the wall of the building and the fireplace
to ensure proper ventilation.
www.barbecook.com 3
3.2 To assemble the appliance
4 GETTING THE APPLIANCE READY
4.1
FOR USE
Lighting the appliance
When using the appliance for th e first time, let it burn for
30 minutes. This removes any remaining manufacturing
greases from the appliance.
A fireplace that has not been assembled properly is unsafe.
The fireplace needs to be positioned on a concrete base
capable of carrying the weight of the fireplace. The base
must be perfectly even and smooth. In case the fireplace
is intended to be placed on a terrace or in a similar location,
the place needs to be first inspected by a professional to
identify whether it can carry the load.
When starting fire and using the fireplace never wear clothes
with loose sleeves. In order to extinguish fire from coal and
wood, never use water, snow, extinguishers ect. Using the
fireplace when under the influence of alcohol and/or
substances may impair your ability to comply with the safety
instructions and instructions for use.
NOTE : In order to harden the steel structure of the
fireplace and thus increase its lifespan, it is
recommended not to heat the fireplace to more than
350°C the first two times it is preheated.
Do not use spirits, petroleum and such like to start fire in
the fireplace. Burning liquid fuels as well home and
garden waste in the fireplace is prohibited. Only use fire
starters compliant with EN 1860-3.
5 MAINTAINING THE APPLIANCE
In order to remove corrosion spots manually, use sand paper,
clean and dry the surface and apply one layer of repair paint
enclosed with the fireplace.
In order to protect the fireplace from unfavourable weather
conditions, it is recommended to cover entire structure with a
waterproof material for winter. Snow accumulated on the walls
of the fireplace structure may cause corrosion spots to appear.
When using sharp objects to clean the grate or remove ash,
you may damage the top coating of the fireplace structure.
Clean the combustion chamber regulary without using
chemical substances and mechanical devices that may
damage the coating of the fireplace.
Ordering spare parts5.1
Parts that are directly exposed to fire or intense heat have to be
replaced from time to time. To order a spare part:
1 Look up the reference number of the part you need. You find
a list of all reference numbers below the exploded views in
the second part of this manual and on www.barbecook.com
If you registered your appliance online, you will
automatically be guided to the correct list.
2 Order the spare part at your point of sale. You can order
parts both under and outside warranty.
6 WARRANTY
Covered6.1
Your appliance comes with a warrant y of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
• You used, assembled and maintained your appliance
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
• You can present the receipt and the unique serial number of
your appliance. This serial number starts with a C, followed
by 15 digits. You can find it:
- On this manual.
- On the packaging of the appliance.
• The Barbecook quality departme nt confirms that the parts
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any
form of contribution. In all case s, the warranty is limited to the
repair or replacement of the defective part(s).
6.2 Not covered
The following damages and defects are not covered by the
warranty:
• Normal wear and tear (rusting, distortion, discolouration...) of
parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
• Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
• All damages caused by inadequate maintenance, incorrect
storage, improper assembly or modifications made to
pre-assembled parts.
• All damages caused by misuse and abuse of the appliance
(not using it according to the instructions in this manual,
using it for commercial purposes, using it as a fire basket...).
• All consequential damages caused by careless or
non-compliant use of the appliance.
• Rust or discolouration caused by external influences, the use
of aggressive detergents,... These damages are not
regarded as manufacturing defects.
www.barbecook.com 4
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
KURO S - I
223.2821.000
KURO L - I
223.2824.000
KURO S - U
223.2823.000
KURO L - U
223.2826.000
227.2821.000
227.2823.000
227.2824.015
227.2826.015
227.2820.005
227.2820.005
227.2820.010
227.2820.010 227.2800.100
227.2800.100
227.2824.000
227.2826.000
www.barbecook.com 11
/