2. Chore-Time
  3. MF2456A LIBERTY® and REVOLUTION® Tube Wire Clip

Chore-Time MF2456A LIBERTY® and REVOLUTION® Tube Wire Clip Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Chore-Time MF2456A LIBERTY® and REVOLUTION® Tube Wire Clip Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1.Install a Tube Wire Clip (55649) on each Feeder as shown.
2.Install the Tube Wire Clip on the side of the Feeder that is toward the Winch/pulling end.
3.Ensure that with the Clip snapped in place, the tube seam does not come in contact with the Feed Cone.
Installation
Liberty and Revolution Tube Wire
Clip (PN 55649) Instruction
Figure 1.Tube Wire Clip installation
(55649)
Tube Wire Clip
C
abl
e
pul
l
di
r
ect
i
o
n
C
a
b
l
e
p
u
l
l
d
i
r
e
c
t
i
o
n
Install the Tube Wire Clip between the
Feed Tube seam and the Feeder Cone.
2456-001 5/16
2456-006 5/16
2456-002 5/16
2456-003 5/16
Feed Cone
Incorrect! Incorrect!
Figure 2.Incorrect installation
2456-005 5/16
2456-004 5/16
MF2456AMay 2016
Liberty and Revolution Tube Wire Clip (PN 55649) Instruction Installation
2
MF2456A
MADE TO WORK.
BUILT TO LAST.
®
Revisions to this Manual
Page No. Description of Change
New Manual
Contact your nearby Chore-Time distributor or representative for additional parts and information.
CTB Inc.
P.O. Box 2000 • Milford, Indiana 46542-2000 • U.S.A.
Phone (574) 658-4101 • Fax (877) 730-8825
E-Mail: ctb@ctbinc.com • Internet: http//www.ctbinc.com
/