Hitachi VM-E110A Owner's manual

Category
Camcorders
Type
Owner's manual
Instruction Manual
8mm Video Camcorder
VM-E110A/310A
vMoEi oA VM 3iOA I
%. .................................. ............................................................................................................................. ........
Hitachi Home Electronics (America), HITACHI (HSC) CANADA, INC.
Inc. 3300 Trans Canada Highway, Pointe
Claire,
3890 Steve Reynolds BIvd., Norcross, GA 30093 Quebec, H9R1B1, CANADA
Tel. 404-279-5600 Tel. 514-697-9150
HITACHI SALES CORPORATION OF
HAWAII, INC
3219 Koapaka Street, Honolulu, Hawaii 96819
Tel. 808-836-3621
Thank you for buying a Hitachi product. You've chosen the best 8 mm video camcorder
for you, and we want to help you make the most of your purchase. Please take time to
become familiar with the manual and how it is set up. Keep it handy for feature
reference.
QR12521 © Hitachi, Ltd. 1995
Printed in Japan KG-M(N)
TABLE OF CONTENTS
For Your Safety ........................................................................................................................................... 4
IMPORTANT SAFEGUARDS .................................................................................................................. 6
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER ........................................ 9
Read This First .......................................................................................................................................... 11
Before You Begin ...................................................................................................................................... 11
Features ............................................................................................................................................... 12
Components and Accessories .......................................................................................................... 12
Optional RF Adapter .......................................................................................................................... 14
MOISTURE .......................................................................................................................................... 14
Attaching the Shoulder Strap (The shoulder strap is not supplied with VM-E110A) ............... 14
Viewfinder Bright, Color and Tint Control (only for VM-E310A) ..................................................15
Getting Started ........................................................................................................................................... 15
Charging the Battery .......................................................................................................................... 15
Adjusting the Electronic Viewfinder ................................................................................................. 17
Eyepiece Adjustment ......................................................................................................................... 18
Attaching the Optional Wide or Tele Converter Lens ................................................................... 18
Loading Batteries ................................................................................................................................ 19
Date/Title Battery ................................................................................................................................ 19
Remote Control Battery ..................................................................................................................... 19
Camcorder Batteries .......................................................................................................................... 20
Removing the Battery Pack .............................................................................................................. 21
Checking the Battery's Charge ......................................................................................................... 21
Using Alkaline Dry-Cell Batteries ..................................................................................................... 22
Using Alternative Power Sources .................................................................................................... 24
Using the AC Adapter/Charger ......................................................................................................... 24
Using a Car Battery ............................................................................................................................ 24
Inserting and Removing Cassettes .................................................................................................. 25
Inserting a Cassette ........................................................................................................................... 25
Removing a Cassette ......................................................................................................................... 25
Protecting Recorded Material ........................................................................................................... 26
Attaching the Optional DC Camera Light ....................................................................................... 26
Removing the DC Camera Light ...................................................................................................... 27
Replacing the DC Camera Light Bulb ............................................................................................. 27
Using Memory (The remote control is optional for VM-E110A) .................................................. 29
Setting the Date and Time ................................................................................................................ 29
Correcting the Date and Time .......................................................................................................... 31
Automatic Date Recording ................................................................................................................ 31
Automatic Title Recording ................................................................................................................. 31
Using the Linear Time Counter ........................................................................................................ 32
Using the Display Button (The remote control is optional for VM-E110A) ................................ 32
Date Search ......................................................................................................................................... 33
Remaining Tape ................................................................................................................................. 33
Getting Started - Identifying Controls ....................................................................................................... 34
Basic Techniques ....................................................................................................................................... 37
Making a Basic Recording ................................................................................................................ 38
Playing Back Your Recording ........................................................................................................... 39
Connecting to a Television with Audio In and Video In Jacks ..................................................... 39
Connecting to a Television without Audio In and Video In Jacks ............................................... 39
Simple Playback (Using the Electronic Viewfinder) ...................................................................... 40
Using Still ............................................................................................................................................. 40
Using Forward and Reverse Search ............................................................................................... 40
Advanced Techniques ............................................................................................................................... 42
Using the Power Zoom ...................................................................................................................... 42
Using the Digital Zoom ...................................................................................................................... 42
Using the INST. ZOOM (Instant Zoom) Button .............................................................................. 43
Using Auto Focus ............................................................................................................................... 43
Using Manual Focus .......................................................................................................................... 44
Using Instant Review ......................................................................................................................... 45
Using Quick Edit ................................................................................................................................. 45
Using Macro ........................................................................................................................................ 46
Creating and Recording A Title (The remote control is optional for VM-E110A) ..................... 46
Creating a Title .................................................................................................................................... 47
Correcting Errors ................................................................................................................................ 47
Recording Title on a Tape in the Camcorder ................................................................................. 48
Recording a Created Title while Transferring a Tape ................................................................... 48
Using the Wireless Remote Control (The remote control is optional for VM-E110A) .............. 48
How to attach remote control to the shoulder strap (The remote control is optional for VM-
E110A) ................................................................................................................................................. 49
To remove the remote control .......................................................................................................... 49
Dubbing from the camcorder to a VCR ........................................................................................... 49
Using Synchro Edit (The remote control is optional for VM-E110A) .......................................... 50
Using Audio/Video Dubbing (The remote control is optional for VM-E110A) ........................... 51
Recording Television Programs ....................................................................................................... 51
General Maintenance ................................................................................................................................. 53
Cleaning the camcorder Heads ........................................................................................................ 53
Cleaning the Lens and Picture Tube of the Electronic Viewfinder ............................................. 53
Periodic Maintenance ........................................................................................................................ 53
Troubleshooting .................................................................................................................................. 54
Specifications ............................................................................................................................................ 55
Accessories Add Excitement ..................................................................................................................... 56
To Order in the United States ........................................................................................................... 57
HITACHI WARRANTY CARD (USA Front) ......................................................................................... 58
HITACHI WARRANTY CARD (USA Back) ......................................................................................... 60
HITACHI WARRANTY CARD (Front) CANADA ONLY .................................................................... 61
HITACHI CANADA WARRANTY CARD (Back) ................................................................................ 62
1The CAM/OFF/VIDEO switch turns the camcorder on and off, leaving the date/time feature
unaffected. If the unit is to be left unattended for a long period of time, turn the camcorder off
and attach the lens cap.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO
ORMO STUREI
The camcorder has the following caution marks.
Identifications of caution marks
symbol warns the user that uninsulated voltage within the unit may have
sufficient magnitude to cause electrical shock. Therefore. it is dangerous to make any kind
of contact with any inside part of this unit.
symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore it should be read carefully to avoid
any problems.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING TO PREVENT FIRE OR ELECTRIC SHOCK. MATCH WIDE BLADE OF PLUG
TO WIDE SLOT. AND FL, LLY INSERT PLUG.
WARNING: Many television programs and films are copyrighted. In certain circumstances,
copyright law may apply to private in-home videotaping of copyrighted materials.
"This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard entitled
"Digital Apparatus", ICES-003 of the Department of Communications."
The liquid crystal display (LCD) panel is made by highly precise technology. More than
99.99% of its picture elements (pixels) are effective, but some (less than 0.01%) may
appear as colored bright dots. This does not indicate a fault as the LCD panel stretches
the limits of current technology (only for VM-E310A).
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following twoconditions: (1)This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits of Class B digital
device, pursuant of Part 15 of the FCC Rules. These limits are designedto provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses.and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However.there is no guarantee that interference will not occur in a
3articular installation. Ifthis equipment does cause harmful interference to radio or
television reception, which can be determined byturning the equipment off and on.the user
isencouraged to try to correct by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connectthe equipment into an outlet on a circuit different from that to which the receiver
isconnected.
-- Consultthe dealer or an experienced radio/TV technician for help.
Caution to the user: Changes or modifications not expressly approved bythe manufacture
could void the user's authority to operate the equipment.
"Note to CATV system installer: This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that provides guidelines for proper
grounding and. in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical".
Notes:
This unit uses 8mm video format cassettes.
It records and plays back in the SP mode (14.3 mm/sec).
It cannot record and play back in the LP mode (7.2 mm/sec).
In addition to the careful attention devoted to quality standards inthe manufacture of
your video product, safety is a major factor in the design of every instrument. But,
safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper
use of aVideo Cassette Recorder and accessory equipment. Please read it carefully
before operating your video product and keep it in a handy place for future reference.
INSTALLATION
1 Read and Follow Instructions -- All the safety and operating instructions should be
read before the video product is operated. Follow all operating and use instructions.
2 Retain Instruction -- The safety and operating instructions should be retained for
future reference.
3 Heed Warnings -- Comply with all warnings on the video product and in the
operating instructions.
4 Polarized Plug -- This video product is equipped with a polarized alternating-current
line plug (a plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. To prevent electric shock do not use this
polarized plug with an extension cord, receptacle or other outlet unless the blades can
be fully inserted without blade exposure. If you need an extension, use a polarized
cord.
5 Power Sources -- This video product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your video dealer or local power company. For video products
intended to operate from battery power, or other sources, refer to the operating
instructions.
6 Overloading -- Do not overload wall outlets and extension cords as this can result in
a risk of fire or electric shock. Overloaded AC outlets and extension cords are
dangerous, and so are frayed power cords, damaged or cracked wire insulation and
broken plugs. They may result in shock or fire hazard. Periodically examine the cord
and have it replaced by your service technician if appearance indicates damage or
deteriorated insulation.
7 Power Cord Protection -- Power supply cords should be routed so that they are not
likelyto be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point wherethey
exit from the appliance.
8 Ventilation -- Slots and openings in the cabinet are provided for ventilationto ensure
reliableoperation of the video product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by
placingthe video product on a bed, sofa, rug or other similarsurface. This video
product should never be placed near or over a radiatoror heat register. This video
product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the video product manufacturer's instructions have
beenfollowed.
9 Attachments -- Do not use attachments unless recommended bythe video product
manufacturer as they may cause hazards.
Caution:Mainta!n electrical SafetylPower_line opeiated equipment or accessories
connected to this unit should bear the UL listingmark or CSA certificationmark onthe
accessory itselfand should not have been modified soas to defeat the safety features.
Thiswill help avoidany potential hazard from electric shock or fire. If in doubt, contact
qualified service personnel.
10 Water and Moisture -- Do not use this video product near water -- for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
11 Accessories -- Do not place this video product on an unstable card, stand, tripod,
bracket or table. The video product may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or
table recommended by the manufacturer, or sold with the video product. Any mounting
of the product should follow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
11A An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart combination to
overturn.
12 Outdoor Antenna Grounding -- If an outside antenna or cable system is
connected to the video product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with
respect to proper grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode. See example below:
EXAMPLE OF ANTENNA GROUNDING
13 Power Lines -- An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching or approaching such power lines or circuits as
contact with them might be fatal. Installing an outdoor antenna can be hazardous and
should be left to a professional antenna installer.
USE
14 Cleaning -- Unplug this video product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15 Object and Liquid Entry -- Never push objects of any kind into this video product
through openings as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the video
product.
16 Lightning -- For added protection for this video product during a lightning storm, or
when it its left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable-system. This will prevent damage to the
video product due to lightning and power-line surges.
SERVICE
17 Servicing -- Do not attempt to service this video product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18 Conditions Requiring Service -- Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the following conditions.
a. When the power-supply cord or plug is damaged
b. If liquid has been spilled or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the video product to its normal operation.
e. If the video product has been dropped or the cabinet has been damaged.
f. When the video product exhibits a distinct change in performance -- this indicates a
need for service.
19 Replacement Parts -- When replacement parts are required, have the service
technician verify that the replacements he uses have the same safety characteristics as
the original parts. Use of replacements specified by the video product manufacturer can
prevent fire, electric shock or other hazards
20 Safety Check -- Upon completion of any service or repairs to this video product, ask
the service technician to perform safety checks recommended by the manufacturer to
determine that the video product is in safe operating condition.
21 Heat -- The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
1. Save these Instructions -- This page contains important safety and operating
instructions for AC Adapter/Charger Model VM-AC 84A.
2. Before using AC Adapter/Charger, read all instructions and cautionary markings on
(1) AC Adapter/Charger, (2) battery and (3) product using battery.
3.Also read all instructions on pages4 and 5.
4.Caution ,, To reduce ris k of injury; charge only rechaigeab! e batteryl VMiBP82G, V M-
BP82 or VM-BP84.
5. Do not expose charger to rain or snow.
6. Use of an attachment nor recommended or sold by the battery charger manufacturer
may result in a risk of fire, electric shock, or injury to persons.
7. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when
disconnecting charger.
8. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
9. Do not operate charger with damaged cord or plug -- replace them immediately.
10. An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
A. The pins on plug of extension cord are the same number, size, and shape as those
of plug on charger.
B. That extension cord is properly wired and in good electrical condition; and
C. That wire size should be met below:
Minimum
AWG size Length of extension cord (feet)
18 Equal to or less than 100
16 Equal to or less than 150
11. Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way; take it to a qualified serviceman.
12. Do not disassemble charger: take it to a qualified serviceman when service or repair
is required. Incorrect reassembly may result in a risk of electric shock or fire.
13. To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
]0
To guide you, we've included
A "Before You Begin" section containing important cautions for your family's safety as
well as instruction for getting your video camcorder ready for use. Please read and
understand this section thoroughly before moving on.
A "Getting Started" section to familiarize yourself with the controls and prepare you
for recording.
A "Basic Techniques" section to allow you to use your video camcorder quickly and
confidently before advancing to the more sophisticated features of the Hitachi VM-
E110A/E310A.
"Advanced Techniques" to help you with some of the exciting, sophisticated features
of the Hitachi VM-E110A/E310A. We hope you will take the time to learn about these
functions since they have been designed for you. You can use the video camcorder
without reading this section.
A "General Maintenance" section to help keep your purchase in good repair.
We want this manual to be as helpful as possible, so it includes two easy ways to find
the information you need:
A quick index for the information you use most often (this page).
A detailed table of contents directing you to specific information quickly (page 10).
Get to know your video camcorder by using this manual, and get to know Hitachi. We
appreciate your business.
Quick Index
Charging the Battery.....12
Making a Basic Recording.....29
Playing Back Your Recording.....30
Using Power Zoom.....35
Using Digital Zoom.....35
Using the Wireless Remote Control.....42
Dubbing from camcorder to VCR.....43
Any problems that occur as a result of any of the following conditions will not be covered
by our warranty.
Be careful that no water, dust or sand enters the camcorder.
When you shoot at a scene which contains an extremely bright object such as the sun
or a light source, a bright vertical bar may appear in the picture.
Your camcorder is functioning properly, but the solid-state pickup device (C.C.D.)
]!
Before You Begin
usually causes this as an inherent characteristic. Try to avoid shooting an excessive
bright object directly.
Be sure not to leave it in a place where the temperature exceeds 120 ° (49°C), or the
pickup device may be damaged.
Dangerous includes:
Inside a car with the windows closed and in direct sunshine.
Near heating appliances.
Do not leave the viewfinder lens facing sunlight for a prolonged period, or the
phosphorescent surface of the cathode ray tube or the liquid crystal display (LCD) panel
may be damaged.
Easy to use
24x zoom ratio
Instant zoom
Recorded date search
Automatic title recording
Difference between Models VM-E110A/E310A
.... _-EIIOA VI_=E310A
i |
i |
I |
I |
]]artery Pack _d]P82G
Remote Control
OntrM.
Remote c0ntrM
holder P........... ...... .......
Shoulder S_ap not supplied PrOfided
This instruction manual shows the illustrations for the VM-E310A.
Check that you have all the following components and accessories before preceding.
1. Audio/Video output cable
2. Battery pack
3. AC adapter/charger
12
4. Batteries for date/title and remote control
5. Shoulder strap
6. DC cord
7. Remote control
8. Remote control holder
]3
Ifyou wish to connect this camcorder to a television that does not have audio/video
inputjacks you will needto use the optional RF adapter model VM-RF86A.
The RF adapter can be purchased bycalling the telephone number below. For your
convenience Visa, MasterCard, and American Express credit cards are accepted. The
RF adapter can also be purchased by mail by sending either cheque, money order or
your credit card information to the following address:
IN U.S.A.
Hitachi Home Electronics (America), Inc.
Parts Division 401 West Atresia Blvd.
Compton, California. U.S.A. 90220
Tel: 1-800-HITACHI (1-800-448-2244)
For more information concerningthe purchase of camcorder accessories, please see
the optional accessory listing on page55.2ACTUAL LIST STARTS ON PAGE 51
Avoid operating your camcorder immediately after movingit from a cold placeto a
warm, humid place. Give the camcorder 2 to 3 hoursto stabilize in the ambient
conditions of the surroundings before inserting a cassette. When moved from a cold
placeto a warm, humid place, moisture may condense on the head drum inside the
machine.This moisture could cause the tape to stick to the headwheel and damage the
headwheel or tape.
When a small amount of moisture is sensed, "TAPE" flashes in the viewfinder. Remove
the cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour.
Thread the ends of the provided shoulder strap through the slots at the back of the
camcorder and thread through the shoulder straps' buckles. Please ensure that the
straps are securely fastened before using the shoulder strap to carry the camcorder.
]4
This small "BRIGHT", "COLOR" and "TINT" controls are set at the factory and should
require no adjustment. If they ever require adjustment, use a plastic screwdriver. Make
the adjustments with caution to prevent damaging the miniature controls.
This section guides you through the initial preparation of the camcorder. None of these
processes are complex. Set aside some time, relax, and familiarize yourself with this
quality instrument.
Enjoy getting to know all about your Hitachi 8mm camcorder. The more comfortable and
familiar you are with the machine and its features, the more you can make it do for you.
Let's get started!
It is crucial that you read and understand all the safety instructions before you begin. If
you haven't read the safety instructions yet, please take the time to do so now.
3The first step is to set the battery to charge. It takes approximately an hour (VM-BP82 and
VM-BP82G), enough time to familiarize yourself with some of the basic features of the
camcorder. Once charged the battery will give you approximately 60 - 70 minutes of operating
time depending on the use of Zoom and start/stop.
Charge the battery at a temperature range of 50°F(IO°C) - 86°F (30°C) to prevent damage to
the battery.
1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide blade
fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the blades fully
into the outlet either contact an electrician to replace your obsolete outlet, or use a polarized
cord or outlet accessory.
2. To insert the battery into the charger align the reference arrow on the battery with the
reference arrow on the AC adapter/charger. Push the battery till it is flush with the AC
adapter/charger sliding it in the direction of the arrow as shown in the figure.
3. The CHARGE light remains on while the battery charges, turning off when charging
]5
completes.
Note:Remove the OC cord from the AC adapter/charger before attempting to charge the
battery I The CHARGE tight flashes if the DC cord remains connected while you attempt to
charge the battery_
Note;Do not operate the battery at temperature below 14°F (-10°C) or above 95 °F (35°C)
At extremely low temperatures operation time decrease& while at high temperature the
battery may be damaged.
&fter charging set the mark switch to red so that you may quickly identify
whether the battery is charged or uncharged.
[Note: The marker Switch does not guarantee the batteries Charge statu& 1
Additional Information
To use a battery in optimum condition:
Use the battery until the low charge light (_) flashes. Using a battery for a short time
and then recharging it may shorten the operation time.
It is recommended to refresh a battery before recharging it when it has not been used
for long time; otherwise its operation time becomes short. Press the refresh button.
After refreshing is complete, the REFRESH light turns off and the CHARGE light turns
on and charging begins automatically.
Refreshing a fully charged battery takes approximately 4 hours (VM-BP82G), adding
considerable time to battery charging.
With repeated normal charging and use the battery will gradually lose operating time.
When operation time becomes too short to be useful, replace the battery.
If the POWER light begins to flash during charging, remove the battery and then
reattach it to the AC charger/adapter. If the POWER light continues to flash after several
]6
attempts to attach it, the battery is unable to take a charge and must be replaced.
Do not attach a hot batteryto the AC adapter/charger. Allow it to cool. Attaching a hot
batteryto the AC adapter/charger causes the POWER lightto flash.
THERE ARE NO USER-SERVICEABLE PARTS INSIDETHE BATTERY OR AC
ADAPTER/CHARGER.
THROWING THE BATTERY INTOFIRE OR EXPOSING ITTO EXCESSIVE HEAT
(ABOVE 149°F (65°C)) MAY CAUSE INJURY.
SHORTING THE BATTERY'STERMINAL INCREASES RISK OF FIRE OR
ELECTRICAL SHOCK.
ATTENTION:
N|-Cd
The product that you have purchased contains a rechargeable battery. The battery is
recyclable. At the end of its useful life, under various state and local laws. it may be illegal
to dispose of this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.
The electronic viewfinder adjusts simply by pivoting it to a position where it is
comfortable and easy to see through. Place the viewfinder back in its original position
before storing the camcorder in its case or carrying the camera recorder around to avoid
damaging the viewfinder or camcorder.
]7
i Getting Started i
CAtI_IOf_;
Do _o_ h_ I1_ unil _. _h_ _leCf_onic _ie_t-_der
_Ti'_n _3rr'clrlf # _3s_ c_ _J_e _ m_c:4ion
To use the electronic viewfinder, turn this control for your optimum focus adjustment.
1. To remove the lens hood, turn it counterclockwise.
I
I
E
2. Remove both caps of the converter lens.
3. Screw the lens into the threads on the camcorder lens assembly.
]8
Install the batteries to prevent misplacing them.
Date/Title Battery
1, Pull out the battery holder,
2. Insert the date!tit!e battery with the "+" terminal facing up.
3. Fully insert the battery holder into the camcorder.
Remote Control Battery
(The remote control and the battery are optional for VM-E110A)
1. Push the tab to the left of the remote control and hold it, then remove the battery
holder.
2. Insert the battery with the "+" terminal facing up as shown in the figure above.
3. Replace the battery holder with battery in the remote control making sure that it is full
inserted.
WARNING: KEEP THE BATTERIES AWAY FROM CHILDREN AND PETSI
FSWALLOWEDCONSULTAPHYS C AN MMED ATEL¥FOREMERGENCYI
TREATMENT: l
]9
Getting Started
Note: Replace the batteries with 3V micro lithium cells such as Maxwell CR2025 or its
equivalent.
Note: Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the batteries.
Note: Do not take apart the batteries.
Note: Do not hold the batteries with the metallic tweezers.
Note: Do not re-charge the batteries.
Note: Keep the batteries in a dark. cool. dry place.
Camcorder Batteries
4Using Battery Pack
Before you install the battery for the first time it must be fully charged. Refer to "Charging the
Battery" for details.
1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.
2. Insert the battery into the attachment holder, aligning it with the "(_ )" mark on the
camcorder.
3. Press the center of the battery and hold it, then slide it in the direction of the arrow.
4. After installing the battery, close the cover. Hold the OPEN lever and align the tabs on both
sides of the cover with the end of the attachment holder.
[Note: If the OPEN lever is flat, the cover Will not Ciosel
2O
1 / 1

Hitachi VM-E110A Owner's manual

Category
Camcorders
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document