Glacier Bay BTF51000BN Installation guide

Type
Installation guide

Glacier Bay BTF51000BN is a towel ring designed for mounting on bathroom walls to provide a convenient hanging solution for towels and other bathroom accessories. It features a durable construction with a corrosion-resistant finish, ensuring longevity and reliability in humid bathroom environments. The towel ring includes all the necessary mounting hardware, including E-Z Ancor® drywall anchors, mounting screws, and a set screw, making installation quick and easy.

Glacier Bay BTF51000BN is a towel ring designed for mounting on bathroom walls to provide a convenient hanging solution for towels and other bathroom accessories. It features a durable construction with a corrosion-resistant finish, ensuring longevity and reliability in humid bathroom environments. The towel ring includes all the necessary mounting hardware, including E-Z Ancor® drywall anchors, mounting screws, and a set screw, making installation quick and easy.

Item #350-794
Model #BTF51000NP
USE AND CARE GUIDE
TOWEL RING
TOOLS REQUIRED
Phillips
screwdriver
Electric drill Pencil
E-Z Ancor
®
x2 Mounting bracket x1 Mounting screw x2
Hex wrench x1 Set screw x1
Claw
hammer
HARDWARE INCLUDED
Determining the mounting
location
Installing the bracket in a
wood stud
Installing the bracket in
drywall
Determine the location where you wish to
install your accessory.
Align the mounting brackets with pilot
holes and secure with the mounting
screws.
Drill a 3/32 in. pilot hole at each pencil
mark made.
Align the mounting brackets with the E-Z
Ancor
®
and secure with the mounting
screws.
Place the mounting bracket at the desired
location and mark the installation holes
using a pencil.
Drill a 1/8 in. pilot hole at each pencil
mark made.
Drive the E-Z Ancor
®
into the wall using
a Phillips screwdriver until ush with
the wall.
Installation
1
3
2
NOTE: To install the bracket in a wood stud,
proceed to Step 3. To install the bracket in
ceramic tile, proceed to Step 4.
1
HOMEDEPOT.COM
Please contact 1-855-434-5224 for further assistance.
Installation (continued)
Installing the bracket in
ceramic tile
Installing the bathroom
accessory
Position the bathroom accessory over the
mounting bracket and attach using the
set screw. Tighten securely with the Hex
wrench.
Drill a 1/4 in. pilot hole at each pencil
mark made.
Tap 1/4 in. masonry wall anchors (not
included) into the wall with a hammer
until ush with the wall.
Align the mounting bracket with
installed masonry wall anchors (not
included) and secure with the mounting
screws.
4 5
1. If installing into ceramic tile, before attempting to drill through ceramic tile, the following must be done:
a. Using a center punch, very lightly and carefully tap the spot where you wish to drill to break the shiny glass portion of the tile.
b. Once this is done you can safely drill through the tile with a standard masonry drill bit and install a standard masonry anchor (not included).
Safety Information
Care and Cleaning
Warranty
Clean periodically with a soft cloth.
These bath accessories are designed for years of trouble-free performance. Keep them looking new by doing the following:
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the nish and void your warranty.
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay
products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any
product or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all
Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty excludes all
industrial, commercial & business usage, whose purchasers are hereby, extended a ve year limited warranty from the date of purchase, with all other
terms of this warranty applying except the duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
This warranty gives you specic legal rights and you may also have other rights that vary from state to state and province to province. Please see a store
or contact 1-855-HD Glacier for more details.
2
HOMEDEPOT.COM
Please contact 1-855-434-5224 for further assistance.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Glacier Bay BTF51000BN Installation guide

Type
Installation guide

Glacier Bay BTF51000BN is a towel ring designed for mounting on bathroom walls to provide a convenient hanging solution for towels and other bathroom accessories. It features a durable construction with a corrosion-resistant finish, ensuring longevity and reliability in humid bathroom environments. The towel ring includes all the necessary mounting hardware, including E-Z Ancor® drywall anchors, mounting screws, and a set screw, making installation quick and easy.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI