My Hibachi BBQ HBC1B Installation guide

  • Hello! I am an AI chatbot trained to assist you with the My Hibachi BBQ HBC1B Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
The unit comes pre assembled. You will need 2 adults to li it out of the
box and place the included secure bracket at the boom secon of table
as you will see further in the instrucons. Open top of the box and move
aps all the way down to the side of box to begin removing and seng up
your Hibachi BBQ table.
Remove the BBQ cooking grill and any other
component or parts that are on top of the solid
stainless steel grilling surface.
Removing the solid stainless steel grilling plate requires 2 adults due
to its weight. Each adult should grab the handles located on each side
and li at the same me. Proper liing procedures should be followed.
Place solid stainless steel grilling surface to the side and away from box so
as to have ample space to remove the actual base of the unit.
Once the solid stainless steel grilling plate has been removed, remove
the stabilizing base and propane tank holder. The stabilizing base will
be used to secure the table in place.
Indicates 1 adult needed to perform
Indicates 2 adults needed to perform
Grab the table base by the sides to li up, the side leg arms of the ta-
ble will drop downward, you will place in an upright posion and
place the brace in the boom to secure it in place as per following step.
Grab the table base by the sides to li up, the legs of the table will drop downward, place in an up-
right posion and place the brace in the boom to secure it in place. Once the base has been secured
by the propane tank and stabilizing part , proceed to install the 4 wheels provided.
Grab the table base by the sides to li up one side and screw in one wheel at a me. Screw in slowly
to secure the wheels without damaging the treads on the base of the table.
This secon how to open and close eang surface,.
There are 3 wooden table secons that are folded for easy carrying and storage, to raise the eang ta-
bles into place, grab the wooden secon of the table and simply li up unl you hear them click into
place. To lower eang tables, simply grab the metal handles located on each side , li up slightly and
press on clips to fold down.
For any addional quesons or concerns feel free to contact us at :
support@myhibachibbq.com
or visit our web site at :
www.myhibachibbq.com
/