The unit comes pre assembled. You will need 2 adults to li it out of the
box and place the included secure bracket at the boom secon of table
as you will see further in the instrucons. Open top of the box and move
aps all the way down to the side of box to begin removing and seng up
your Hibachi BBQ table.
Remove the BBQ cooking grill and any other
component or parts that are on top of the solid
stainless steel grilling surface.
Removing the solid stainless steel grilling plate requires 2 adults due
to its weight. Each adult should grab the handles located on each side
and li at the same me. Proper liing procedures should be followed.
Place solid stainless steel grilling surface to the side and away from box so
as to have ample space to remove the actual base of the unit.
Once the solid stainless steel grilling plate has been removed, remove
the stabilizing base and propane tank holder. The stabilizing base will
be used to secure the table in place.
Indicates 1 adult needed to perform
Indicates 2 adults needed to perform
Grab the table base by the sides to li up, the side leg arms of the ta-
ble will drop downward, you will place in an upright posion and
place the brace in the boom to secure it in place as per following step.