Contec POW251X Owner's manual

Brand: Contec

Model: POW251X

Type: Owner's manual

POW251X

250W 1U ATX Power Supply

POW251X User’s Guide

CONTEC CO.,LTD.

Thank you for purchasing the POW251X.

POW251X is a power supply for FA-UNIT-H4BE exchange. Please use it referring to the following

matter.

Product Configuration List

- Power Supply…1

- Screws…2

- User's Guide (this guide)…1

Exchange Process

(1) First, turn off the chassis, then remove the power cord from the chassis.

And remove the screws that hold in place the cover. Then open the cover.

Cover

Screw

Power Cord

POW251X User’s Guide

POW251X

(2) Remove the fall-off prevention bar and 2.5" drive bay from the chassis.

2.5" Drive Bay

Fall-off Prevention Bar

(3) Unplug the power supply cables from the back plane and drive.

Power Supply 2.5" HDD Back Plane

POW251X User’s Guide

POW251X

(4) Remove the P/S holder bracket.

P/S Holder Bracket

(5) Remove two screws on that hold in place of the power unit. Then take the used power

unit out.

Power Supply

POW251X User’s Guide

CONTEC CO., LTD. December 2005 Edition

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

Japanese http://www.contec.co.jp/

English http://www.contec.com/

Chinese http://www.contec.com.cn/

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD. [12282005]

[12282005] Management No. A-51-196

Parts No. LYFV081

(6) Screw this product with two screws in inverse order of (5).

(7) Install the P/S holder bracket in inverse order of (4).

(8) Plug the power supply cables into the back plane and drive in inverse order of (3).

(9) Install the fall-off prevention bar and 2.5" drive bay to the chassis in inverse order of (2).

(10)Attach the cover and screw it into the chassis in inverse order of (1), then connect the

power cord.

Contec POW251X Owner's manual

Contec POW251X Owner's manual

Contec POW251X Owner's manual

Related papers

Other documents