1
POW251X
250W 1U ATX Power Supply
POW251X User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing the POW251X.
POW251X is a power supply for FA-UNIT-H4BE exchange. Please use it referring to the following
matter.
Product Configuration List
- Power Supply…1
- Screws…2
- User's Guide (this guide)…1
Exchange Process
(1) First, turn off the chassis, then remove the power cord from the chassis.
And remove the screws that hold in place the cover. Then open the cover.
Cover
Screw
Power Cord
POW251X User’s Guide
POW251X
2
(2) Remove the fall-off prevention bar and 2.5" drive bay from the chassis.
2.5" Drive Bay
Fall-off Prevention Bar
(3) Unplug the power supply cables from the back plane and drive.
Power Supply 2.5" HDD Back Plane
POW251X User’s Guide
3
POW251X
(4) Remove the P/S holder bracket.
P/S Holder Bracket
(5) Remove two screws on that hold in place of the power unit. Then take the used power
unit out.
Power Supply
POW251X User’s Guide
CONTEC CO., LTD. December 2005 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD. [12282005]
[12282005] Management No. A-51-196
Parts No. LYFV081
(6) Screw this product with two screws in inverse order of (5).
(7) Install the P/S holder bracket in inverse order of (4).
(8) Plug the power supply cables into the back plane and drive in inverse order of (3).
(9) Install the fall-off prevention bar and 2.5" drive bay to the chassis in inverse order of (2).
(10)Attach the cover and screw it into the chassis in inverse order of (1), then connect the
power cord.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec POW250X Owner's manual
-
Contec PC-RAS(PCI) Owner's manual
-
-
-
-
Contec CPI-DO-16L NEW Reference guide
-
-
-
-