LG LWB18C1AM1 Owner's manual

Brand: LG

Model: LWB18C1AM1

Type: Owner's manual

LG LWB18C1AM1 is an air conditioner that can cool, dehumidify, and circulate air in a room. It has a variety of features to make it more convenient and comfortable to use, such as a remote control, a sleep mode, and an auto-swing function. The air conditioner also has a number of safety features, such as a power surge protector and an automatic shutoff.

Room Air Conditioner

OWNER'S MANUAL

(Window Type)

PLEASE INSTALL YOUR AIR CONDITIONER BY COMPANY

AUTHORISED SERVICE FRANCHISEE / AUTHORISED SALES

& SERVICE DEALER*

(*Please check Warranty Terms in Owner's Manual)

-2-

Operating instructions

Caution while operating Air Conditioner .......................................................................4

About the Controls on the Air Conditioner ....................................................................5

Care and Maintenance .................................................................................................9

Installation Instructions

Features.......................................................................................................................10

Installation Instructions.................................................................................................11

Troubleshooting tips

Before You Call for Service..........................................................................................12

10 Easy steps to find AC Tonnage .............................................................................13

Safety precautions

Safety Precautions .......................................................................................................3

CONTENTS

-3-

Incorrect operation due to ignoring of instruction will cause harm or damage, the seriousness is classified

by the following indications.

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Safety Precautions

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little

preventive care on your part can save you a great deal of time and money over the life of your air conditioner.

You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips first, you may not need to call for service at all.

CAUTION

Contact the authorized service technician for repair or maintenance of this unit.

Contact the authorised dealer for installation of this unit.

The air conditioner is not intended for use by young children or infirm persons

without supervision.

Young children should be supervised to ensure that they do not play with the

air conditioner.

Plug in the power plug

properly.

Do not operate or stop the

unit by inserting or pulling

out the power plug.

Do not damage or use an

unspecified power cord.

Otherwise, it will cause electric

shock or fire due to heat

generation or electrical shock.

It will cause electrical shock or fire

due to heat generation.

It will cause electrical shock or fire.

If the supply cord is damaged, it

must be replaced by a special cord

or assembly available from the

manufacturer or its service agent.

Do not modify power cord

length or share the outlet

with other appliances.

Do not operate with wet

hands or in damp

environment.

Do not direct airflow at room

occupants only.

It will cause electrical shock or

fire due to heat generation.

It may cause electrical shock.

This could damage your health.

Never touch the metal parts

of the unit when removing

the filter.

Do not clean the air

conditioner with water.

Ventilate well when used

together with a stive, etc.

It may cause an injury.

When cleaning the unit, first

make sure the power and

breaker are turned off.

Do not put a pet or house

plant where it will be

exposed to direct air flow.

Do not use for special

purposes.

Since the fan rotates at high

speed during operation, it may

cause an injury.

Water may enter the unit and

degrade the insulation. It may

cause an electric shock.

An oxygen shortage may occur.

This could injure the pet or plant. Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects.

It may cause deterioration of

quality, etc.

Do not operate Switches

with wet hands.

Do not apply an insecticide

or flammable spray.

Do not put a heater, etc.

where is exposed to direct air

flow.

It may cause an electric shock. It may cause a fire or deformation

of the cabinet.

It may cause imperfect

combustion.

CAUTION WHILE OPERATING AC

-4-

-5-

About the Controls on the air conditioner

THERMOSTAT (TEMPERATURE)

The THERMOSTAT/TEMPERATURE is used to maintain the room temperature. The

compressor will cycle on and off to keep the room at the same level of comfort.

When you turn the knob to a higher number (the right side) and the indoor air will

become cooler. The temperature is selected by turning the

Thermostat/temperature knob to the desired position.

The 5 or 6 position (the middle position of arc) is a normal setting for average

conditions.

If you move the switch from a cool setting to

NOTE:

off or to a fan setting, wait at least 3

minutes before switching back to a cool

setting.

COOLING DESCRIPTIONS

For Normal Cooling- Select High Cool

or Med Cool with the OPERATION knob

at the midpoint of THERMOSTAT/

TEMPE RATURE knob(as mentioned in

fig.1 & fig.2)

For Maximum Cooling- Select High

Cool with the OPERATION knob at

OFF: Stop all operation.

FAN: Circulates filtered air.

LOW COOL: Switches on the compressor and air

cooling operation at low fan speed.

MEDIUM COOL: Switches on the Compressor and

air cooling operation at medium fan speed.

HIGH COOL: Switches on the compressor

and air cooling operation at high fan speed.

LOW FAN: Circulates filtered at low

speed.

MED FAN: Circulates filtered air at

medium speed.

TEMPERATURE OPERATION

AUTO SWING

Wait for 3 minutes before restart

Cool Coolest

Off On

Off

High

Cool

Med

Fan

Low

Cool

Med

Cool

Low

Fan

Cooling Model (Fig.1)

Thermostat

Cool Coole st

Wait for 3 minutes before restart

Operation

Auto Swing

Off

Med

Fan

High

Cool

Low

Fan

Med

Cool

Low

Cool

Off

Cooling Model (Fig.2)

your

the highest number available on

Thermostat/temperarure

knob(position 6~9 in fig.2)

For Quieter & Nighttime Cooling

Select Low Cool with the

OPERATION knob at the midpoint of

Thermostat / Temperature

(position 1~4 in fig.2)

knob

Type 3

Type 4

-6-

Controls

The Remote Control unit will not function properly if strong light strikes the sensor

window of the air conditioner or if there are obstacles between the Remote Control

unit and the air conditioner.

Precaution:

POWER BUTTON

Operation starts, when this button is pressed and stops when you press the button again.

OPERATION MODE SELECTION BUTTON

Select (a)Cool (b)Energy Saver (c)Fan & (d)Dehumidification (dry) with this button.

Energy saver mode-fan stops when compressor stops cooling. Approximately after 3

minutes fan will turn on to determine it cooling is needed. In dry mode, unit will run at

low fan speed only with compressor ‘ON’.

Your Panel may look like any

of below mentioned panels.

2 3

Mode Timer

Fan Speed Temp

ON/OFF

Fan

Cool On

Dry Energy Saver

REMOTE CONTROLLER

( )

2 b

DOWN UP

POWER

FAN SPEED

TIMER COOLING/FAN

ENERGY SAVER AUTO SWING

Type 1

Type 2

Temp Power

Fan

Cool

Timer

DOWN UP

POWER

FAN SPEED

TIMER COOLING/FAN

ENERGY SAVER AUTO SWING

( )

2 b

REMOTE CONTROLLER

AUTO

SWING

FAN

SPEED

Mode Timer

COOL

DRY

FAN

TEMP

ENERGY SAVER ON

FAN

SPEED

AUTO

SWING

ON/OFF

(e)

E NERG Y S AV ER

Temp

3 6 1

COOL

FAN

TEMP

ON/OFF

Temp

a S

F d

n p

S i

Pu i r

r f

i r

u o

TEMP

POWER

FAN SPEED

MODE

AUTO SWING

-7-

AUTO RESTART

In failure of electric power the unit runs as prev ious setting operation when power returns.

How to Insert the Batteries

Remove the cover from the back of the remote

controller.

Slide the cover according to the arrow direction.

Insert the two batteries.

Be sure that the (+) and (-) directions are correct.

Be sure that both batteries are new.

Re-attach the cover.

Slide it back into the position.

Do not use rechargeable

batteries, such batteries differ

from standard dry cells in shape,

dimensions, and performance.

Remove the batteries from the

remote controller if the air

conditioner is not going to be

used for an extended length of

time.

FAN SPEED SELECTOR

Select the fan speed in Three steps Low (F1) / Med. (F2) / High (F3)

ROOM TEMPERATURE SETTING BUTTON

Control the room temperature within a range of 16°C to 30°C.

AUTO SWING

The vertical louver swings horizontally by the automatic system and stops when you press the

button again.

SIGNAL RECEIVER

Fan speed in two steps Low (F1) / High (F2) in select models.

Operation modes may vary in select models.

NOTE: ‘SLEEP’ and ‘TIMER’ function cannot operate at same time.

SLEEP BUTTON

AIR PURIFIER (For Plasma Model)

Used to start or stop plasma purification system. Clean filter indication will be 'ON' on panel,

when filter cleaning is required.

Sleep function can be set by one hour for a maximum of 7 hours. In the first 30 minutes set

temperature increases by 1°C and in the next 30 minutes temperature increases by another

1°C, this temperature then remains till the timer function is deactivated. This is how the

sleep function behaves. The fan speed will change to low speed(F1).

ON/OFF TIMER

Set the time of on/off operation. The timer can be set by the one hour for a maximum of 12 hours.

In the first 30 minutes set temperature increases by 1°C and in the next 30 minutes temperature

increases by another 1°C, this temperature then remains till the timer function is deactivated.

-8-

a) Super Cool / 18°C : 18°C Temperature Setting.

b) Cool / 21°C : 21°C Temperature Setting.

c) Comfort / 24°C : 24°C Temperature Setting.

d) (e) Saver / 27°C : 27°C Temperature Setting.

POWER BUTTON

MODE

Select (a) Turbo (b) Silent (c) High Fan & (d) Low Fan with this button.

(a) Turbo / High Cool : Switches on compressor and air cooling operation at high fan speed.

(b) Silent / Low Cool : Switches on compressor and air cooling operation at low fan speed.

(d) Low Fan : Circulates filtered air at low speed.

It is recommended to select 'Silent / Low Cool' for Normal Cooling Operation and select

'Turbo / High Cool' for maximum cooling requirement.

TEMP

Controls Room temp. from 18°C to 27°C with step of 3°C.

AUTO SWING

FAN SPEED

Select fan speed in two steps - High/Low.

Controls

The Remote Control unit will not function properly if strong light strikes the sensor

window of the air conditioner or if there are obstacles between the Remote Control

unit and the air conditioner.

Precaution:

REMOTE CONTROLLER

Auto

Swing

Mode

Temp

HIGH COOL

LOW COOL

HIGH FAN

LOW FAN

Type 2

Operation starts, when this button is pressed and stops when you press the button again.

The vertical louver swings horizontally by the automatic system and stops when

you press the button again.

TEMP

POWER

FAN SPEED

MODE

AUTO SWING

Auto

Swing

Mode

Temp

Turbo

Silent

High

Fan

Low

Fan

Super

Cool

Comfort

Saver

(e)

Type 1

27°C

24°C

21°C

18°C

ON/OFF

-9-

Vent Control

The vent control is located above the

control knobs.

When set at CLOSE, only the air inside

the room will be circulated and

conditioned. When set at OPEN, some

inside air is exhausted outside.

To open the vent, pull the lever toward you.

To close it, push it in.

Air Direction

The direction of air can be controlled

horizontally or vertically by using the

horizontal louver or vertical louver.

The horizontal air direction is adjusted

by setting the AUTO SWING switch to

the ON position.

Horizontal Air-Direction

Vertical Air-Direction

Fingertip pressure on the bank of horizontal

louvers adjusts the air direction up or down

CLOSE VENT OPEN

Additional controls and important information.

Parts Information

CABINET

FRONT GRILLE

AIR FILTER

AIR INTAKE(INLET GRILLE)

AIR DISCHARGE

Learning parts name prior to installation will help you understanding the installation procedure.

VERTICAL AIR DEFLECTOR

(HORIZONTAL LOUVER)

EVAPORATOR

HORIZONTAL AIR

DEFLECTOR

(VERTICAL LOUVER)

CONTROL BOARD

POWER CORD

COMPRESSOR

BASE PAN

BRACE

CONDENSER

PLASMA FILTER ASSY.

10.

11.

12.

13.

14.

15.

2 31 4 5

11 12

-10-

Care and Maintenance

Grille and Case

Turn the air conditioner off and remove the plug

from the wall outlet before cleaning.

To clean, use water and a mild detergent. Do not

use bleach or abrasives.

Air Filter

Ensure the power is off before open the front Grill.

The air filter behind the front grille should be checked and cleaned

at least once every 2 weeks or more often if necessary.

The grille is designed to clean the filter downward.

To remove:

Open the inlet grille upward by pulling out the bottom of the

inlet grille. (Refer Fig. 1)

Using the tab, pull up slightly on the filter to release it and pull

it down (Fig. 1). Slide out five filter from grill (fig. 2).

Clean the filter with warm, soapy water below 40°C (104°/F).

Rinse and gently shake the water from the filter and let it dry

before replacing it.

CAUTION:

DO NOT operate the air conditioner without a filter

because dirt and lint will clog it and reduce

performance.

Drainage

In humid weather, excess water may cause the BASE PAN to overflow.

To drain the water, remove the DRAIN CAP

To remove the condensed water, you can install the drain pan as below.

Take the drain pan which is located in the air discharge.

Install the drain pan to the right corner of the cabinet with 4 screws.

Connect the drain hose to the outlet located at the bottom of the drain

pan. You can purchase the drain hose or tubing locally to satisfy your

particular needs. (Drain hose is not supplied).

CABINET

DRAIN

PAN

SCREW

DRAIN HOSE

(Optional)

DRAIN CAP

BASE

PAN

BASE

PAN

DRAIN

CAP

(Fig. 1)

Important

Long-off period maintenance

1)If the air conditioner is not going to be used for a long period, run the Air-conditioner with the

setting in FAN Mode only and the fan speed on "HIGH" for about half an hour, to dry the whole

Air-conditioner.

2)After a long off period when you are going to use the air conditioner again, repeat above point

no. 1.

Caution

There will possibly be foul smell when the machine is started after a long time (1 week). This is due

to various odours emitted by smoke, foodstuff, cosmetics and others, which syicks to the Air Filter

and Evaporator coil. Hence, clean the Air Filter and the Evaporator before you start the machine

after long time to avoid foul smell.

(Fig. 2)

-11-

Select the Best Location

To prevent vibration and noise, make sure the unit is installed securely and firmly.

Install the unit where the sunlight does not shine directly on the unit.

There should be no obstacle, such as a fence or wall, within 50cm from the back of the cabinet because it will prevent

heat radiation of the condenser.

Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner.

Install the unit a little obliquely outward not to leak the condensed water into the room (about 10 ~ 15mm or 1/4

bubble with level).

CAUTION:

All side louvers of the cabinet must remain exposed to the outside of the structure.

Remove the Air Conditioner From the Case

Remove the 2 shipping screws from the

back of the case.

Remove the 2 screws on each side of the

case. Keep these for later use.

Slide the air conditioner from the case by

gripping the base pan handle and pulling

forward while bracing the case.

Shipping screws

Installation Instructions

Side View

Ceiling

Over 100 mm

Over 110 mm

Room AC

Indoor

10mm

Over 1200 mm

Outdoor

Position A

Wall

Floor

Top View

Wall

Over 1000 mm

Over

200 mm

Over

200 mm

Wall

Indoor

AC Top

Front View

Side View

15mm

Wooden frame 45~50mm

About 45mm

Room AC

Unit Width 'A'

Unit

Height

'B'

Horizontal

Line

-5 ~ +5mm

25mm

8~10mm

About 400~500mm

Wall

Window Width "A"

Window

Height

"B"

600

380

660

428

12000 Btu/h

18000 Btu/h

CATEGORY

22000 Btu/h

660

428

-12-

Installation Instructions

Install the Air Conditioner in the Case

Slide the air conditioner into the case.

Reinstall the screws removed earlier on

each side of the case.

CAUTION:

The power cord must be connected to

an independent circuit.

The green wire must be grounded.

Stuff the foam between the unit and the

wall to prevent air and insects from getting

into the room.

Before installing the front grille, pull out the

vent control lever located above the unit

control knobs, as shown.

Attach the front grille to the case by

inserting the tabs on the grille into the slots

on the front of the case. Push the grille in

until it snaps into place.

Lift the Inlet grill and secure the front grill

with a screw Lower the inlet grill into place.

The maximum lift angle should not be more

than 75°

Max opening angle 75 degree**

Fix Holder lock with base pan & cabinet

with screw to prevent machine from

sliding out of cabinet from back grill side

(Anti theft locking)

Power Cord

Screw

The Foam

When you detach the

front grille from the

case, push the grille

to your rightside and

pull it toward you.

Deo-filter*

* Deo-filter available in select Models.

Remove Deodorizing filter carefully from the grill, shake

clean it by hand & keep it in sunlight for one hour to

activate it again; once it is choked.

** Grill lifting features available in

selected models

To fix the grill with cabinet, screw it

from both sides

-13-

Before you call for service...

Normal Operation

You may hear the thermostat click when the compressor cycles on and off.

Water will collect in the base pan during high numidity or on rainy days. The water may overflow

and drip from the outdoor side of the unit.

The fan may run even when the compressor does not.

Abnormal Operation

Problem

Possible Causes

What To Do

Air conditioner

does not start

The air conditioner is

unplugged.

The fuse is blown/circuit

breaker is tripped.

Power failure.

Air conditioner

does not cool as it

should

Airflow is restricted.

THERMOSTAT control set

too warm.

The air filter is dirty.

The room may have been

hot.

Cold air is escaping.

Cooling coils have iced up.

Air conditioner

freezing up

Ice blocks the air flow and

stops the air conditioner

from cooling the room.

Make sure the air conditioner plug is pushed

completely into the outlet.

Check the house fuse/circuit breaker box and

replace the fuse or reset the breaker.

If power failure occurs, turn the OPERATION control

to OFF( O ) . When power is restored, wait 3 minutes

to restart the air conditioner to prevent tripping of the

compressor overload.

Make sure there are no curtains, blinds, or furniture

blocking the front of the air conditioner.

Turn the THERMOSTAT knob clockwise to a cooler

setting.

Clean the filter at least every 2 weeks.

See the operating instructions section.

When the air conditioner is first turned on you need

to allow time for the room to cool down.

Check for open furnace floor registers and cold air

returns.

Set the air conditioner's vent to the closed position.

See Air Conditioner Freezing Up below.

Set the OPERATION control at fan or HIGH cool with the

THERMOSTAT at the warmer position or the temperature

at more than 23°C.

Hissing Noise- Sound of liquid refrigerant passing througe the system.

AC Operation

is Noisy

Glass pane vibrating.

Glass are to be penned

May be sound of

condensate water.

It is normal (Generally highing only)

(To avoid the noise, remove draing side knob & insert drain pipe

for proper drainge)

Installation levelling not

not proper.

Get it levelled properly.

Unit does not

Cool upon

restart

Compressor not starting

due to 3 minute delay

internally.

This is normal.

If you restart the air conditioner within 3 minutes after turning it

off a protective device will work to shut it off for 3 minutes.

-14-

10 Easy Steps to find out your AC tonnage

Dear Customer,

Please follow Below mentioned 10 easy steps to find out the AC tonnage required for your room.

Example : For Room size 15 feet(L) x 12 feet(B) x 10 feet(H) with one window 4 feet x 3 feet exposed to

sun (west) & one wall exposed to sun (east).The room is on First floor with ceiling not exposed to sun.

The no. of persons occupying the room is 4 nos. The appliance load is – 2 tube lights, 1 Computer & 1 TV.

Calculate the AC tonnage required.

As per steps given above : room volume : 15*12*10 = 1800 cu. Ft. , window area = 4*3=12 sq.ft.,

Wall area (east) = 15*10=150

Step1 = 3 Step6 = 2

Step2 = 2 Step7 = 2

Step3 = 0 Step8 = 0

Step4 = 0 Step9 = 1

Step5 = 1 Step10= 3

Total score = 14

1.5T Window AC

(From Score table)

Score Table

Score

6~10

11~17

18~25

AC recommended

1.0Tr

1.5Tr

2.0Tr

Parameter

Score

Room Volume (Cubic feet)

upto 1000

1001 ~ 2000

2001 ~ 3000

3001 ~ 4000

Window Area exposed to sun

(in sq. ft.) - (West facing)

upto 10

11 ~ 20

21 ~ 30

Window Area exposed to sun

(in sq. ft.) - (other directions)

upto 10

11 ~ 20

21 ~ 35

36 ~ 50

Wall Area exposed to sun

(in sq. ft.) - (West facing)

100

150

200

300

Wall Area exposed to sun

(in sq. ft.) - (other directions)

100

150

300

500

Parameter

ScoreStep

Walls area - not exposed to

sun (in sq. ft.)

100

300

600

1000

No. of persons occupying

room

Ceiling area exposed to sun

(in sq. ft.)

200

300

400

Ceiling area if not exposed to

sun (in sq. ft.)

200

300

400

Total Appliance Load (tube

light-40w / Computer-

75w, CTV - 75 etc.)

100W

250W

500W

Step

Ahmedabad

Agra

Asansol

Aurangabad

Amritsar

Bhatinda

Bangalore

Bhopal

Bhubaneshwar

Calcutta

Chandigarh

Chennai

Cochin

Coimbatore

Delhi(South & East)

Delhi(North& West)

Dehradun

Goa

Gurgaon

Ghaziabad

Guwahati

Hyderabad

Hubli

Indore

Jaipur

Jallandhar

Jammu

Jodhpur

Jorhat

Kundli

Kozhikode

Lucknow

Ludhiana

Madurai

Mumbai

Nagpur

Patna

Pune

Raipur

Ranchi

Rajkot

Surat

Thane

Tirupati

Udaipur

Varanasi

Vijaywada

LGEIL, 233-234, Platinum Plaza, Judges Bunglow Road, Bodakdev Road, Ahmedabad - 51

LGEIL, 1/2, Kendriya Hindi Sansthan, Khandeari Crossing, Agra

LGEIL, Block-E, Ist Floor, P C Chattarjee Market, Rambandhu Tala, GT Road (E), Asansol-713303

LGEIL, 302, CIDCO No. 3, Opp. Hotel Ramgiri, Jalna Road, Aurangabad - 431003

LGEIL, Ganda Singh Wala, Majitha Road, Basement of Syndicate Bank, Amritsar, Punjab

LGEIL, Y P O Gursar Sanewala, 12 KM Milestone, Village Mehta Link Road, Bhatinda-151001

LGEIL, 93,TKN Mansion, Ground Flr, KH Road, Banglore - 560027

LGEIL, 13A, Vignes Warehousing Corporation, Sector-G, Govindpura Industrial Area, J K Road, Bhopal

LGEIL, Plot No. 02, 1st Flr., Bapuji Nagar, Bhubaneshwar- 751009

LGEIL, 1, Ho-Chi-Min-Sarani, 6th Floor, Metro Towers, Calcutta-700071

LGEIL, Plot No.177-G, Ind. Area, Phase-1, Chandigarh

LGEIL, AA11, 2nd Avenue, Fatima Tower, Anna Nagar West, Chennai-600040

LGEIL, 40/1270, Vasudeva Buildings, T.D. Road, Ernakulam Cochin-682011

LGEIL, 250A, Sanganur Main Road, Kannappa Nagar, Coimbatore-641027

LGEIL, 221,Okhla Industrial Area, Phase-III, New Delhi

LGEIL, 13 Milestone, Rohtak Road, Opp. Maharaja Agrsen Hospital, Punjabi Bagh, New Delhi-110026

LGEIL, M - 22, Mobbewala, Tata Commercial Compound, Dehradun-Saharanpur Road, Dehradun

LGEIL, Plot No. D-3&D-4, Rego Baug, Alto Santacruz, Bambolim, Goa-403

LGEIL, IInd Flr, A Block, Centre Point Bldg, Sushant Lok, Gurgaon

LGEIL, J-10, RDC Rajnagar, Ghaziabad

LGEIL, Shantineer Bhawan, C K Aggarwal Path, Chenikurthi, Guwahati-781003

LGEIL, K/1/1, IDA, Uppal, Hyderabad - 500039

LGEIL, 603/1B, Ravi Nagar Road, Behind Renuka Petrol Pump, Gokul Road, Hubli-580030

LGEIL, 3rd Flr., 304 Bansi Trade Centre, 581/5 M.G. Road, Indore-452003

LGEIL, B-71, Sahakar Marg, Lal Kothi Scheme, Jaipur-302015

LGEIL, Opp Jassi Market, Village Khajurla, Near TVS Godown, GT Road, Jallandhar

LGEIL, Plot No.-52,Transport Nagar, Narwal, Jammu

LGEIL, 22(1-A), RIICO Heavy Industrial area, Jodhpur - 342003

LGEIL, Jail Road, Milleneum Stores, Jorhat-785001

LGEIL, Sunshine Enterprises, Sunder Cold Storage, GT Karnal Road, Kundli-Sonipat

LGEIL, 11 / 434, Eranhikkal Bldgs, Cherooty Road, Kozhikhode- 673001 (Kerala)

LGEIL, 537, Hari Kunj, Keshav Nagar, Sitapur Road, Lukhnow

LGEIL, Village Jhande, Near Badowal Railway Station, Opp Ferozpur Road, Ludhiana

LGEIL,7-1-54, Jothimal Godown, Madurai Dindigul High Road, Paravai, Madurai-625402 (Tamilnadu)

LGEIL, Unit No.3, L-Wing, 2nd Flr., Tax Center, Behind HDFC Bank, Chandiwali, Andheri(E), Mumbai-400072

LGEIL, 5A, Road No.13, Behind MSRTC Workshop, MIDC Hinga, Nagpur-440016

LGEIL, Sumitra Sadan, IInd Flr, West Boring Road, Crossing Patna - 800001

LGEIL, 105/106, Premium Point, IIIrd Flr, Shivaji Marg, Pune - 411005

LGEIL, Nathani Compound, Shyam Nagar, Katora Talab, Raipur(C.G)

LGEIL, 402, Commerce Tower, Opp. Gel Church Complex, Main Road, Ranchi

LGEIL, 301, 302 Dhanrajni, Dr. Yagnik Road, Rajkot - 360001

LGEIL, 1001-1004, Ascon Plaza, IInd Flr, Anand, Mahal Road, Behind Bhulka Bhavan School, Adajan, Surat-395009

LGEIL, Gall No. 6-9,S-2, Golden Park Complex, Hardas Nagar, LBS Marg, Panchpakhadi, Thane (West)-400602

LGEIL, 19-3-13/M4, Behind Hero Honda Showroom, Renugunta Road, Tirupati - 517501

LGEIL, 101, Moti Magri Scheme, Udaipur

LGEIL, Pama Complex, DLW, Lahartara Road, Shivdaspur, Manduadih, Varanasi (UP)

LGEIL, 1st Floor, Yalamanchili Complex, Ring Road, Near Executive Club, Vijay wada - 520008.

079

0562

0341

0240

0183

0164

080

0755

0674

033

0172

044

0484

0422

011

0135

0832

0124

0120

0361

040

0836

0731

0141

0181

0191

0291

0376

0130

0495

0522

0161

0452

022

07104

0612

020

0771

0651

0281

0261

02522

0877

0294

0542

0866

50040012/17, 30928467, 30928471

2530913, 2530917, 3096036/3956267

3096036, 3092009, 3092010

2344705, 3095438

5548001/02/03

2420448, 2229933, 3098274/75

51145145, 30910754, 30910753

5262847, 5262848, 5260717, 3092938, 3959804

2531430, 2534280, 3966525, 3966526

22883250/51, 30946125

5087389,90, 3959595, 3959596

55510500/08, 30924478, 30924479

2368966, 2370744, 3946877, 3946878

2332506, 2331862, 3094613, 3094573

26830953, 26837347, 30989665/30989279

9873002340/9873002339

2644213, 2644283, 3093412, 3093411

3094759, 3094955, 3094956

5047461/62/63, 3950019, 3099959

2722973, 2724686, 3943465, 3943467, 3943465, 3943467

2668984, 2662896, 2663895, 2665983, 2666958

27207504/05/06, 30921140

2337251/52/53, 3090749, 3090651

5065523/24, 2546985, 25065669, 3956060, 3956065

2741553, 2742639, 3951458, 3951478

502667/68, 3955644/3955643

2477420, 2477419, 2474396, 2474384

2742403, 2742384, 3093487(Accounts), 3093489

2309120

2219201, 2219202, 2219203, 2219204, 30997371, 30997496

2366755, 2366756, 2366678, 3955567, 3955568

2757538/39/58/59, 3951507/8/9

2804412/15, 3959985

2464016

28472410/14, 39522108, 39516172

235120, 235122, 3092641, 3092642

'3098714, 3099156

56030736, 56030732/33/34, 30922960, 30967366, 30915833

5037470, 5053171, 3959707, 3959708

2331519, 2331815, 3090426

2481499, 2467692, 3094093, 3094096

2730982/85, 3954419

277497/277559, 39526264

2282306/08

3093426, 3093462

2373919, 3091773, 1774, 9839800000

2450128, 3094526, 3094528

BRANCH BRANCH OFFICE ADDRESS

STD CODE

PHONE NO.

Email : happycalls@lgezbuy.com

LG Electronics

P/No.: 3828A30140G

LG LWB18C1AM1 Owner's manual

LG LWB18C1AM1 Owner's manual

LG LWB18C1AM1 Owner's manual

Related papers

Other documents