Delfield SSHPT2-S Datasheet

Type
Datasheet
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
®
SSHPT2-SH
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, standard
shelves are chrome plated. Shelves rest on clips which are adjustable
on 1” increments on stainless steel pilasters axed to the cabinet
interior. Pilasters are removable without tools for cleaning. Mounted
to the interior ceiling, the interior incandescent light is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be stainless steel. Each door has two edge mount, self
closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Metal door handle shall be recessed into the
door for easy grip without impacting aisle space. Keyed door lock is
mounted in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are magnetic
and mount to the door snapping in place and are removable without
tools.
Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped,
with tubular ns. High speed blower provides uniform airow in
the cabinet. Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled as one piece
and can be removed as one piece. Temperature is controlled by an
adjustable electronic thermostat. System on/o switch is located on
the front exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.
Specifications
Standard Features
Options &
Accessories
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior
(SA)
Aluminum interior and exterior, stainless
front (SM)
Built in door locks with heavy duty strikes
Recessed metal door handle
Exterior digital thermometer with high/low
temperature alarm
Easy to use electronic control
Easy access “ip up” shroud
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Three chrome plated wire shelves per section
6” adjustable stainless steel legs
Stainless steel breaker strips
Stainless steel interior door liner
Two year parts & labor warranty
One section Two section
SSHPT1-S SSHPT2-S Stainless exterior and interior full door
SSHPT1-SH SSHPT2-SH Stainless exterior and interior half door
SAHPT1-S SAHPT2-S Stainless exterior and aluminum interior full door
SAHPT1-SH SAHPT2-SH Stainless exterior and aluminum interior half door
SMHPT1-S SMHPT2-S Stainless front aluminum exterior and interior full door
SMHPT1-SH SMHPT2-SH Stainless front aluminum exterior and interior half door
Models
Specication Line®
Self-Contained Solid Door Heated Pass-Thru
Specication Line®: Solid Door Heated Pass-Thru
Security (prison) package
6” polyurethane casters
Door eld rehingability
Additional shelves
Tray slides
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
Delfield
®
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Specication Line®
Self-Contained Solid Door Heated Pass-Thru
Printed in the U.S.A.
DSSSHPT
09/08
Mechanical Data
MODEL NUMBER VOLTAGE AMPS
STORAGE
CU.FT.
SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.
BTU/HR
SYSTEM CAP
SHIP
WEIGHT
NEMA
PLUG
ENERGY
(KWH)
SSHPT1-S, SSHPT1-SH,
SAHPT1-S, SAHPT1-SH,
SMHPT1-S, SMHPT1-SH
120/208-240 9.0 26.96 12.81 3 N/A N/A
398lbs
(181kg)
N/A N/A
SSHPT2-S, SSHPT2-SH,
SAHPT2-S, SAHPT2-SH,
SMHPT2-S, SMHPT2-SH
120/208-240 16.0 51.92 27.54 6 N/A N/A
650lbs
(295kg)
N/A N/A
ELEVATION VIEW
SSHPT1-S, SAHPT1-S,
SMHPT1-S
ELEVATION VIEW
SSHPT1-SH, SAHPT1-SH,
SMHPT1-SH
ELEVATION VIEW
SSHPT2-S, SAHPT2-S,
SMHPT2-S
ELEVATION VIEW
SSHPT2-SH, SAHPT2-SH,
SMHPT2-SH
PLAN VIEW
SSHPT1-S, SAHPT1-S, SMHPT1-S
SSHPT1-SH, SAHPT1-SH, SMHPT1-SH
PLAN VIEW
SSHPT2-S, SAHPT2-S, SMHPT2-S
SSHPT2-SH, SAHPT2-SH, SMHPT2-SH
END VIEW
ALL SECTION UNITS
30"
58"
6.12
81.12
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
30.00"
76.2cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
205.0cm
29.00
34.00
56.00
34.00
83.00
34.00
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
75.00”
190.5cm
30"
58"
6.12
81.12
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
30.00"
76.2cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
205.0cm
29.00
34.00
56.00
34.00
83.00
34.00
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
75.00”
190.5cm
31.00"
78.7cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
206.0cm
29.00”
73.7cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
75.00”
190.5cm
31.00"
78.7cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
206.0cm
29.00”
73.7cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
75.00”
190.5cm
31.00"
78.7cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
206.0cm
29.00”
73.7cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
75.00”
190.5cm
Deleld reserves the right to make changes to the design or specications without prior notice.
  • Page 1 1
  • Page 2 2

Delfield SSHPT2-S Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI