Gronomics RGB TK 48-95, RGB 48-95, RGB TK 48-95S Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Gronomics RGB TK 48-95 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Parts List
ITEM QTY. PART # DESCRIPTION
1 4 1300 Corner Post, 2 Dovetailed Sides, 4” x 4” x 13”
2 2 1302 Center Post, 3 Dovetailed Sides, 4” x 4” x 13”
3 11 4501 Side Rail, 45” x 5-1/2” x 1”
4 2 4501L Side Rail, w/Logo, 45” x 5-1/2” x 1”
Raised Garden Bed (2 Tier 48” x 95”)
Assembly Instruction
1
Parts Identi cation
Stack matching pieces in piles. Using the parts
list, locate and count the individual pieces and
verify that you have received the correct number
of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective
layer between the ground and the pieces during
assembly. This will help prevent damage to the
pieces.
RGB 48-95
RGB 48-95S
1
2
4
3
Packaged & Inspected by: Date:
www.gronomics.com East Bethel, MN USA 763-753-7374
3
End Rail And Center Support Rail Assembly
2
Side Rail Assembly
NOTE: Garden bed will be assembled upside down and ipped over
when completed.
Stand two 4” x 4” x 13” corner posts (Item 1) and one 4” x 4” x 13” center
post (Item 2) between the corner posts with slots facing each post and
slots facing away from you.
Install two 45” x 5-1/2” side rails w/Logo (Item 4), (position side rails w/
Logo upside down) into the slots and slide to the bottom of the slots.
Repeat procedure for the remaining two 4” x 4” x 13” corner posts and
the 4” x 4” x 13” center post, using 45” x 5-1/2” side rails (Item 3).
Install two 45” x 5-1/2” side rails (Item 3) into the slots at each end of the
garden bed and slide to the bottom of the slots.
Install one 45” x 5-1/2” side rail (Item 3) (center support rail) between the
center posts and slide to the bottom of the slots.
5
Garden Bed Completed
4
Final Side Rail Assembly
Install the six remaining 45” x 5-1/2” side rails (Item 3) into the slots and
slide down.
Flip the garden bed right side up. (See step 5).
Garden bed shown in nished position.
When lling with soil, raise the center support rail (Item 3)
to the middle of the slots (as shown).
NOTE: Ground preparation is optional. It is recommended to level an
area under the frame of the garden bed before placing garden bed and
lling with soil.
Soil Capacity: 25.8 Cubic Feet
Position Logo Upside Down
2
4
4
1
1
3
3
3
3
3
3
3
3
Logo
Logo
/