Elevated Toilet Seat with Arms
Note: Inspect all components for shipping
damage. If any parts are missing or
damaged, contact your dealer/retailer for
replacements.
To Install:
1. Remove the existing toilet seat and lid
from the toilet and set aside. DO NOT
DISPOSE - You will be reattaching
them to the toilet in step 3.
2. Place the elevated seat on the toilet
bowl so the holes line up where the
seat and lid will reattach.
3. Place the seat and lid on top of the
elevated seat and, using the extra long
screws and wing nuts provided, secure
to the toilet. NOTE: The screws should
go through the lid, seat and elevated
toilet seat and attach to the existing
toilet tank by tightening the wing nuts
to the screws.
4. Be sure to securely tighten wing nuts to prevent the elevated seat from
dislodging.
Care and Maintenance:
Do not use an abrasive cleaner. Use a non-abrasive cleaner with warm water.
Periodically inspect all components for damage or looseness. DO NOT USE
IF THE SEAT IS LOOSE! Retighten using enclosed directions.
Warning:
-Do not use this product without first reading and understanding the
instruction sheet. Otherwise, injury or damage may occur.
-Elevated seats with arms are not designed to support total body weight.
They should be used for assistance only.
-Weight capacity - 300 lb. (136.36 kg)
972575332 1005
INSTRUCTIONS
Elevated Toilet Seat with Arms
Note: Inspect all components for shipping
damage. If any parts are missing or
damaged, contact your dealer/retailer for
replacements.
To Install:
1. Remove the existing toilet seat and lid
from the toilet and set aside. DO NOT
DISPOSE - You will be reattaching
them to the toilet in step 3.
2. Place the elevated seat on the toilet
bowl so the holes line up where the
seat and lid will reattach.
3. Place the seat and lid on top of the
elevated seat and, using the extra long
screws and wing nuts provided, secure
to the toilet. NOTE: The screws should
go through the lid, seat and elevated
toilet seat and attach to the existing
toilet tank by tightening the wing nuts
to the screws.
4. Be sure to securely tighten wing nuts to prevent the elevated seat from
dislodging.
Care and Maintenance:
Do not use an abrasive cleaner. Use a non-abrasive cleaner with warm water.
Periodically inspect all components for damage or looseness. DO NOT USE
IF THE SEAT IS LOOSE! Retighten using enclosed directions.
Warning:
-Do not use this product without first reading and understanding the
instruction sheet. Otherwise, injury or damage may occur.
-Elevated seats with arms are not designed to support total body weight.
They should be used for assistance only.
-Weight capacity - 300 lb. (136.36 kg)
972575332 1005
INSTRUCTIONS
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Graham Field LUMEX 6482ER-2 User manual
-
Winnebago Reyo Owner's manual
-
Winnebago Impulse 24V User manual
-
Toto Washlet EK TCF6402G User manual
-
Airstream LAND YACHT MOTORHOME User manual
-
Winnebago 2005 Minnie Winnie Owner's manual
-
Winnebago Chalet Owner's manual
-
Winnebago 2004 Chalet Owner's manual
-
Bailey Caravan Owner's manual
-
Winnebago Journey 40R 2015 User manual
